Abstract:Abstract Three-dimensional (3D) composite polyvinylidene fluoride (PVDF)/polyacrylonitrile (PAN) electrospun nanofibrous membranes combining both thick and thin nanofibers have been fabricated by the method of multi-jet electrospinning with sheath gas to realize high-efficiency air filtration under a low pressure drop. The thin PAN nanofibers form a dense membrane, with a strong capturing ability on the ultra-fine particles, while the thick PVDF nanofibers play a 3D supporting effect on the thin PAN nanofibers. In this case, the combination results in a fluffy membrane with higher porosity, which could achieve the airflow passing through the membrane without the air pressure drop. The effects of the composite manner of thick nanofibers and thin nanofibers are investigated, in order to optimize the air filtration performance of the 3D composite nanofibrous membrane. As a result, the maximum quality factor for air filtration could reach up to 0.398 Pa −1 . The particle-fiber interaction model was used to simulate the air filtration process as well, and the simulation results were fairly consistent with the experimental results, providing a guidance method for the optimization of composite nanofibrous membrane for high-efficiency air filtration. More interestingly, a cationic poly[2-(N,N-dimethyl amino) ethyl methacrylate] (PDMAEMA) was added in the PVDF solution to obtain a composite air filtration membrane with excellent antibiosis performance, which achieved the highest inhibition rate of approximately 90%. In short, this work provides an effective way to promote antibiosis air filtration performance by using an electrospun nanofibrous membrane, and might also effectively accelerate the biological protection application of current air filtration membranes.

A highly efficient nanofibrous air filter membrane fabricated using electrospun amphiphilic PVDF- g-POEM double comb copolymer

Polyvinylidene fluoride/graphene oxide/polyimide composite high-efficiency PM2.5 filtration nanofiber membranes

Ferroelectric PVDF nanofiber membrane for high-efficiency PM0.3 air filtration with low air flow resistance

Biocompatibile nanofiber based membranes for high-efficiency filtration of nano-aerosols with low air resistance

Thermoplastic Polyurethane Nanofiber Membrane Based Air Filters for Efficient Removal of Ultrafine Particulate Matter PM0.1

Large-Scale Blow Spinning of Nanofiber Membranes for Highly Efficient Air Mechanical Filtration with Antibacterial Activity

Ultrafine PVDF Nanofibers for Filtration of Air-Borne Particulate Matters: A Comprehensive Review

Three-dimensional composite electrospun nanofibrous membrane by multi-jet electrospinning with sheath gas for high-efficiency antibiosis air filtration

Antibacterial, efficient and sustainable CS/PVA/GA electrospun nanofiber membrane for air filtration

Rational Process Design for Facile Fabrication of Dual Functional Hybrid Membrane of MOF and Electrospun Nanofiber towards High Removal Efficiency of PM2.5 and Toxic Gases

Electrospun Polymethylhydrosiloxane/Poly(lactic Acid) Multiscale Nanofiber Membrane with Highly Hydrophobic Interface As Material for Protective Mask Filters

Bumpy structured nanofibrous membrane as a highly efficient air filter with antibacterial and antiviral property

Polyvinylidene fluoride multi-scale nanofibrous membrane modified using N-halamine with high filtration efficiency and durable antibacterial properties for air filtration

Preparation of electrospun PVA@Ls@BAC@PDMS composite nanofibrous air filtration membrane with high efficiency removal for PM2.5 and excellent heat resistance

Preparation of PVA/PEI/CNC/ZnO composite membrane with good mechanical properties and water resistance by electrostatic spinning using for efficient filtration of PM2.5

Poly(lactic-co-glycolic acid)/Polycaprolactone Nanofibrous Membranes for High-Efficient Capture of Nano- and Microsized Particulate Matter.

Tri-layer gradient structured micro/nanofibrous nonwovens for high filtration efficiency and low air resistance

High Filterable Electrospun Nanofibrous Membrane with Charged Electret After Electrification Treatment for Air Filtration

Electrospun Coarse Modified Polystyrene/carbon Aerogel Nanofibrous Composite Membrane for Effective PM2.5 Air Filtration

Polypropylene/Polyvinyl Alcohol/Metal-Organic Framework-Based Melt-Blown Electrospun Composite Membranes for Highly Efficient Filtration of PM2.5

Facile fabrication of reinforced sub-micron fibrous media with hierarchical structure compounded thermally for effective air purification in application