Abstract:Hollow fiber membrane contactors (HFMCs) for degasification offer several advantages, including compact design, reduced power consumption, and higher mass transfer rate compared to conventional technologies. These characteristics make HFMCs an ideal choice for applications such as ultrapure water production and wastewater treatment, where the removal of even trace amounts of dissolved gases is critical. In this study, we conducted 3D computational fluid dynamics (CFD) simulations to explore the impact of geometric features on HFMC hydrodynamic performance. A scaled-down version of a commercial module (3 M-Liqui-Cel TM ) was used, preserving the actual dimensions and spacing of the hollow fiber membranes. Four different configurations were considered in the simulations based on the presence of a baffle and variations in the size and arrangement of liquid distributors. Analyses of fluid motion and pressure drop indicated that designs with larger distributors and internal baffles may reduce stagnation zones and promote more uniform flow distribution. At higher velocities, multiple recirculation areas were observed within the domain, with the size and volume of these zones varying across the different designs. These enhancements, driven by velocity fluctuations, vortex formation, and eddies, could potentially lead to higher mass transfer rates, especially at elevated flow rates. Additionally, the swirling arrangement of distributor holes in varied sizes yielded the lowest pressure drop for all flow rates studied, offering benefits in reduced energy consumption and increased operational efficiency. Our simulation results highlight the potential of optimized distributor hole sizes and patterns to enhance flow mixing and minimize pressure drop.

Computational fluid dynamics simulation and the experimental verification of protein adsorption on a hollow fiber membranes module

Kinetic Model of Affinity Membrane Adsorption for Biomolecules in Stacked Flat-sheet Module

High-throughput screening methods for protein adsorption evaluation with microtiter filter plate

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

A Computational Fluid Dynamics Study of Binary Adsorption Separation in Chromatography

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Analysis on the structure of different hollow fiber membrane contactors

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

An experimental and modeling investigation of the behaviors of solution in fluoropolymers hollow fiber membranes (HFMs)

Interfacial modification of hydrogel composite membranes for protein adsorption with cavitands as nano molecular containers

Membrane adsorbers with ultrahigh metal-organic framework loading for high flux separations

Affinity Adsorption and Hydrodynamic Behavior in A Tapered-Bed of Upward Flow

CFD modeling of membrane fouling in hollow fiber ultrafiltration membrane under cross-flow filtration

CFD applied to membrane process intensification and module scale-up

Three-dimensional CFD modeling for hollow fiber gas separation membrane modules based on a dual porous media model

Dynamic Monte Carlo Simulation of Protein-Membrane Interaction and Its Implication on Micro-Filtration Process

Modeling and Analysis of the Affinity Filtration Process, Including Broth Feeding, Washing, and Elution Steps

Modelling and Experimental Study of Membrane Wetting in Microporous Hollow Fiber Membrane Contactors

Modeling and simulation of liquid-solid circulating fluidized bed ion exchange system for continuous protein recovery

Progress on CFD simulation for mass transfer optimization of membrane process

3D CFD Analysis of Geometrical Design Impact on Hydrodynamic Performance in Hollow Fiber Membrane Contactors