Abstract:This paper introduces a novel three‐phase grid‐tied Multilevel Inverter (MLI) topology that employs a basic unit per phase, yielding a symmetrical configuration capable of generating 5‐level output voltage, and an asymmetrical configuration producing 7‐level and 9‐level output voltages. The generalization of the proposed MLI is presented in terms of the number of modules (M) and output levels (L). A comprehensive comparative analysis of the proposed MLI topology against existing configurations is presented for both symmetric and asymmetric cases. To achieve synchronization a PLL less Grid Voltage Modulated Direct Power Control (GVM‐DPC) technique is implemented. This paper also includes mathematical modelling of GVM‐DPC without PLL and the design of an LCL filter. This paper introduces a novel three‐phase grid‐tied multilevel inverter (MLI) topology that employs a basic unit per phase, yielding a symmetrical configuration capable of generating five‐level output voltage and an asymmetrical configuration producing seven‐level and nine‐level output voltages. The generalization of the proposed MLI is presented in terms of the number of modules (M) and output levels (L). A comprehensive comparative analysis of the proposed MLI topology against existing configurations is presented for both symmetric and asymmetric cases. The switching devices in the MLI are controlled using the in‐phase disposition level shift PWM (IPD‐LSPWM) technique. The synchronization of the grid‐tied MLI is addressed by considering the uncertainties in grid and load parameters at the point of common coupling (PCC). To achieve synchronization, a PLL‐less grid voltage‐ modulated direct power control (GVM‐DPC) technique is implemented. To mitigate the delay associated with PLL, a GVM‐DPC based on the stationary reference frame (SRF) is applied. This paper also includes mathematical modelling of GVM‐DPC without PLL and the design of an LCL filter. A simulation model of a 15‐kVA, three‐phase, nine‐level grid‐tied MLI is developed in MATLAB/Simulink and tested under both steady‐state and dynamic conditions. The proposed controller's performance is evaluated under the load variations and sudden changes in available power from the distributed generator (DG). Robustness is tested under adverse conditions such as voltage sag/swell at the PCC. Furthermore, the system is implemented in the OPAL‐RT OP4510 real‐time simulator, and the results are validated to confirm the effectiveness and robustness of the proposed grid‐tied MLI.

A five-level (5-L) double gain inverter for grid-connected and photovoltaic applications

A Five-Level Common-Ground-T-Type Inverter for Solar Photovoltaic Applications

A Six-Switch Seven-Level Triple-Boost Inverter

A Single-Phase Common-Ground Five-Level Transformerless Inverter with Low Component Count for PV Applications

A five‐level single‐phase transformerless inverter with lesser component count for PV applications

A High Step-up Multilevel Inverter with Minimized Components Featuring Self-balancing and Continuous Input Current Capabilities

A Novel Single-Stage Five-Level Common-Ground-Boost-Type Active Neutral-Point-Clamped (5L-CGBT-ANPC) Inverter

A Generalized High Gain Multilevel Inverter for Small Scale Solar Photovoltaic Applications

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications

A multilevel boost inverter with removed leakage current and a reduced number of elements for photovoltaic applications

Common-Ground-Type Single-Source High Step-Up Cascaded Multilevel Inverter for Transformerless PV Applications

A 31 L multilevel inverter topology with less switching devices for hybrid electric vehicle applications

Enhancing grid‐connected solar PV systems with a novel three‐phase hybrid multilevel inverter

A single‐source nine‐level solar‐PV inverter with quadruple voltage boosting and high reliability

Reduced switch single source multilevel inverter topology for renewable photovoltaic system applications

A Family of Single-Stage, Buck-Boost Inverters for Photovoltaic Applications

High Gain Active Neutral Point Clamped Seven-Level Self-Voltage Balancing Inverter

Common-Ground-Type Inverter Topology With Low Voltage Stress and Boosting Ability

A Novel Boost Cascaded Multilevel Inverter

Transformer-Less Seven-Level Inverter with Triple Boosting Capability and Common Ground

A PLL‐less grid‐tied three‐phase multilevel inverter with reduced device count and LCL filter