Abstract:The probability density function curves obtained from the WindPRO program with the Weibull and Rayleigh distributions are given in Figure 8, along with the observed data. According to the figure, it is seen that the results of Weibull and WindPRO are closer to the observed data. In this study, wind characteristics and electricity generation potential from wind energy were investigated in the Bitlis‐Rahva region in eastern Turkey. Ten‐minute wind data from the Bitlis meteorological station were used in the study. The determination of the wind speed (WS) distribution was carried out using the WindPRO program together with the Weibull and Rayleigh distributions. R2, RMSE, and χ2 goodness‐of‐fit tests were used to measure the accuracy of the velocity distribution process. A digital elevation model of the power generation site was created to evaluate wind data and predict turbine performance. Wind power generation performance was evaluated using five different wind turbines (WTs). A power curve model was developed for the WTs to determine the capacity for energy generation. According to the error tests, it has been determined that the results obtained with the WindPRO program can represent the observed wind data most accurately. The results from the WindPRO program analysis showed an average annual WS of 3.26 m/s and a power density of 49.77 W/m2. Increasing height was found to increase WS and power density. The prevailing wind direction was found to be South‐Southwest with a frequency value of 27.5%. The largest capacity factor was obtained from the WT with the largest rotor diameter and rated power. Out of all the WTs examined, the turbine with the largest rated power and rotor diameter produced the greatest amount of energy. According to the capacity factor values calculated for the selected WTs, the region is not considered efficient for wind energy investments. However, as WS and power density increase with increasing altitude, it is thought that different higher parts of the region may be more efficient in terms of wind energy utilization.

Comparison of eight methods of Weibull distribution for determining the best-fit distribution parameters with wind data measured from the met-mast

Performance Comparison of New Generation Parameter Estimation Methods for Weibull Distribution to Compute Wind Energy Density

Statistical analysis of wind energy potential using different estimation methods for Weibull parameters: a case study

Is the Weibull distribution really suited for wind statistics modeling and wind power evaluation?

Accuracy Testing of Different Methods for Estimating Weibull Parameters of Wind Energy at Various Heights above Sea Level

Comparative Analysis of Eight Numerical Methods Using Weibull Distribution to Estimate Wind Power Density for Coastal Areas in Pakistan

Comparison of different multi-parameters probability density models for wind resources assessment

Comparative evaluation of optimal Weibull parameters for wind power predictions using numerical and metaheuristic optimization methods for different Indian terrains

Comparative analysis of different methods in estimating wind speed distribution, and evaluation of large‐scale wind turbine performance in Rahva‐Bitlis, Turkey

Performance of Metaheuristic Algorithms for Wind Resource Modelling: A Comparison Using 80 m Mast Measurements

Evaluation of Wind Energy Potential Using an Optimum Approach Based on Maximum Distance Metric

Wind energy potential assessment using Weibull distribution with various numerical estimation methods: a case study in Mersing and Port Dickson, Malaysia

Probability distributions for offshore wind speeds

Wind Energy Potential and Economic Analysis with a Comparison of Different Methods for Determining the Optimal Distribution Parameters

Metaheuristic data fitting methods to estimate Weibull parameters for wind speed data: a case study of Hasan Polatkan Airport

Comparative analysis of two new wind speed T-X models using Weibull and log-logistic distributions for wind energy potential estimation in Tabriz, Iran

Estimation methods for wind power potential with practical case study

Statistical Evaluation of Wind Properties Based on Long-Term Monitoring Data

Probability modeling on multiple time scales of wind power based on wind speed data

Determination of Optimal Parametric Distribution and Technical Evaluation of Wind Resource Characteristics for Wind Power Potential at Jhimpir, Pakistan

Analysis of wind speed probability distribution and wind turbine generator capacity factor