Abstract:Sapphire is extensively utilized in the optical, aerospace, and civil electronic industries due to its favorable optical, physical, and chemical characteristics. To enhance the efficiency and quality of sapphire lapping, an orthogonal experiment was conducted on a single-side sapphire substrate using a ceramic lapping plate. The study examined the impact of lapping plate material, lapping pressure, lapping speed, and abrasive particle size on the surface roughness, profile, and removal rate. By analyzing the signal-to-noise ratio and variance of machining parameters, the influence rule and influence of the weight of machining parameters on machining results were obtained. The results of the experiment demonstrate that the material removal rate of sapphire was positively affected by an increase in lapping pressure, speed, and abrasive particle size. Moreover, the removal rate of the SiC lapping plate was the highest among the experimental materials. The roughness of the sapphire surface decreased with increasing lapping pressure, speed, and abrasive particle size, while the SiC plate had the lowest surface roughness. The profile tolerance of sapphire diminished as the lapping pressure, lapping speed, and the abrasive particle size increased. Additionally, the ZrO2 lapping plate exhibited the most minor profile tolerance. The size of the abrasive particle significantly impacted the material removal rate, with a specific gravity exceeding 70%. Similarly, the lapping pressure had a significant effect on both the surface roughness and the profile tolerance. The ideal machining parameter combination comprised an abrasive particle size of 10 μm, a lapping pressure of 22 785.0 Pa, a lapping speed of 60 rpm, and a lapping plate of SiC. Under optimal machining conditions, sapphire exhibited a material removal rate of 0.65 μm/h, a surface roughness of 0.0920 μm, and a profile tolerance of 2.0915 μm after 20 min of lapping. This demonstrated that the lapping process enables highly efficient and high-quality machining of sapphire substrates.

Effect of Abrasive Grain Concession on Micromechanical Behavior of Lapping Sapphire by FAP

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

A study on mechanism of sapphire polishing using the diamond abrasive by molecular dynamics

Tribological effects of loose alumina abrasive assisted sapphire lapping by a fixed agglomerated diamond abrasive pad (FADAP)

In-situ reconditioning mechanism for fixed abrasive pads based on the wear behavior of loose grains

Orthogonal experimental study on the influence of machining parameters on flat lapping of sapphire substrate

Effect of particle size on friction signal characters when lapping quartz glass with fixed abrasive pad

Modeling of Forces and Material Removal Rate in Ultrasound Assisted Magnetorheological Polishing (UAMP) of Sapphire

An Experimental Investigation of Sapphire Grinding by Porous and Vitrified M0.5/1.5 Diamond Grinding Wheel

Investigation on ultra-precision lapping of A-plane and C-plane sapphires

Research on Subsurface Damage of Lapping Sapphire with Diamond Fixed Abrasive

Modeling of Material Removal Rate for the Fixed-Abrasive Double-Sided Planetary Grinding of a Sapphire Substrate

Lapping of sapphire using developed clusters of diamond and ceria chemically active abrasives

Mechanical removal of SiC by multi-abrasive particles in fixed abrasive polishing using molecular dynamics simulation

Study of Effect of Impacting Direction on Abrasive Nanometric Cutting Process with Molecular Dynamics

Effects of Silica Abrasive Size on Sapphire Cmp Performances and Their Removal Mechanisms

A novel agglomerated diamond abrasive with excellent micro-cutting and self-sharpening capabilities in fixed abrasive lapping processes

Preparation of Non-Spherical Silica Composite Abrasives by Lanthanum Ion-Induced Effect and Its Chemical–mechanical Polishing Properties on Sapphire Substrates

Effect of different grinding strategies on subsequent polishing processes of sapphire

Novel model of material removal rate on ultrasonic-assisted chemical mechanical polishing for sapphire

Study of the inhibition mechanism of sapphire subsurface damage by tangential ultrasonic vibration