Abstract:Abstract Composite structures are used as corrosion insensitive load bearing reinforcement in dynamic Thermoplastic Composite Pipe (TCP) and Hybrid Flexible Pipe (HFP) applications. The qualification of such structures can follow different strategies: product level versus material characterization. DNVGL-ST-F119 proposes a generic knowledge-based approach based on a testing pyramid. The pyramid allows a generic material characterization for a large number of conditions. Testing of dedicated specimens in constant media exposure measures the actual properties and changes of the material. Regression data is obtained for end-of-life properties. Simulations can be conducted using these properties to determine performance of the product in any state and condition and validate any load cases through classical stress combination. The characterization for VESTAPE® Nylon 12 Carbon Fiber thermoplastic composite (CF-PA12) covers all failure mechanisms for matrix, fiber and interface in static, dynamic and stress rupture mode for virgin, fully hydrocarbon saturated and aged to end of life in saturated condition. Each condition assessment is carried out in complete temperature dependency for subzero, room temperature, intermediate and maximum use temperature of 176°F (80°C). Fatigue testing covers runtimes of 106 cycles whereas stress rupture assessment exceeds 12,500h which corresponds to almost 1.5 years. With dense data populations for both regression curves and static test results the coefficient of variation is controlled. All characterization logic and data are analyzed for validity and certified by the official body of the DNV-GL. The material characterization enables simulation of a variety of application designs in predictive engineering and a simplified study is made for a dynamic gas injection jumper to demonstrate relevant occurring load cases. Utilizing all data and approaches allows to define the overall application envelope of the material. For the case of the thermoplastic composite of CF-PA12 it covers static flowlines, dynamic jumpers, service lines up to dynamic risers in sour crude service up to 176°F (80°C). The knowledge-based approach allows for economic design in engineering cases without compromising safety.

Qualification of a New Robust and Cost-Effective Polymer for Flexible Pipe Pressure Sheath

Down-hole Isolation Towards High-Temperature Reservoir Using Packing Elements with Swellable Thermo-Plastic Vulcanizates

Modification of Poly(ethylene 2,5-Furandicarboxylate) with Aliphatic Polycarbonate Diols: 1. Randomnized Copolymers with Significantly Improved Ductility and High CO2 Barrier Performance

Assessment of the Integrity of the PVDF Barrier in Unbonded Flexible Pipes

Modification of Poly(ethylene furandicarboxylate) with Aliphatic Polycarbonate diols: 1. Randomnized Copolymers with Significantly Improved Ductility and High CO2 Barrier Performance

Reduction in the transport of sour gases and hydrocarbons to underlying PE-RT through thin films of PVDF

Fatigue Life Assessment of Single Layer 60512 PVDF Barrier in Unbonded Flexible Risers

Full Generic Qualification of Nylon 12 Carbon Fiber Composite for Dynamic Thermoplastic Composite Pipe and Hybrid Flexible Pipe Applications

An Effective Package of Antioxidants for Avoiding Premature Failure in Polypropylene Random Copolymer Plastic Pipes under Hydrostatic Pressure and High Temperature

Critical Assessment of PVDF Multilayer Barriers in Unbonded Flexible Risers: Applications and Benefits

Preparation and Properties of the Low-Cost Heat-Resistant Rubber Material for Trenchless Rehabilitation of Thermal Pipelines

Applicability Analysis of Thermoplastic Material As Liner Pipe for Trenchless Rehabilitation of Thermal Pipelines

Application of Nanomaterials in the Production of Multilayer Electrically Conductive and Heat-Resistant Polymer Pipes

Prediction of flexible pipe annulus composition by numerical modeling: identification of key parameters

Preparation of FKM/EFEP thermoplastic vulcanizate with excellent heat and oil resistance, gas barrier property and recyclability

The performance and causes of failure of polyethylene pipes subjected to constant and fluctuating internal pressure loadings

Tensile strength of the unbonded flexible pipes

STRESS-STRAIN STATE SIMULATION OF AN UNDERGROUND LIQUEFIED NATURAL GAS PIPELINE

Flame-Retarded and Heat-Resistant PP Compounds for Halogen-Free Low-Smoke Cable Protection Pipes (HFLS Conduits)

Analysis of the Mechanical Behaviors of Fiber Reinforced Unbonded Flexible Pipe Under Combined Load