Abstract:Harvesting solar energy for photothermal conversion in an efficient manner for steam-electricity cogeneration is particularly opportune in the context of comprehensive solar utilization to address the challenge of a global shortage of fresh water. However, the fragile solar thermal devices and the single-energy utilization pattern greatly hinder extensive solar energy exploitation and practical application. Herein, a flexible carbon cloth nanocomposite with a biomimetic pelargonium hortorum-petal-like surface that embraces all desirable chemical and physical properties, that is, enhanced light acquisition, excellent photothermal property, and operational durability, for high-performance solar-driven interfacial water evaporation distillation is reported. Combined with the two-dimensional water channel, the solar evaporator shows a solar-to-steam conversion efficiency of 93% under the simulated solar illumination of 1 kW m<sup>–2</sup>. More strikingly, the solar steam generation-induced electricity based on the practical consideration toward more infusive solar thermal application is proposed. Such integrative steam-electricity generators presented here provide an attractive method to produce on-site electricity and fresh water in an individualized mode in various resource-constrained areas.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c07091?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c07091</a>.Analysis of heat transfer processes; optical images of the fabrication process of the CC-BPHPLS; differential pore size distribution of CC-BPHPLS; Raman spectra of CC-BPHPLS; reflectance and transmittance spectra of the wet/dry state CC and CC-BPHPLS in the wavelength range of 200–2500 nm; water contact angles of the CC; TGA of the CC-BPHPLS from 30 to 800 °C in air atmosphere; stress–strain curves of the CC-BPHPLS; state of the CC-BPHPLS immersed in acid and alkaline solutions; solar steam generation performance of CC-BPHPLS under solar irradiance; energy balance and heat loss diagram of CC-BPHPLS during the solar vapor generation process; durability test performed under 1 sun illumination for 3 h a day; desalination cycling test performed under 1 sun illumination for 3 h a day; schematic of the evaporation structure with the TE module and water transmission channel; photographs of the TE module; temperature difference and open-circuit voltage of the TE module with the water transmission channel at the steady-state water temperature platform of 25 °C; maximum output power of the hybrid system under different light intensities; schematic of TE power generation without the water transmission channel under a temperature platform; light response of the TE device without the water transmission channel at temperature platforms of 5, 15, and 25 °C under different solar irradiations; temperature response of the TE device without the water transmission channel at temperature platforms of 5, 15, and 25 °C under different solar irradiations; after submerging in a solution of pH 1 and 13 for two weeks, time-dependent mass change of CC-BPHPLS with the TE module and the open-circuit voltages of the device with the water transmission channel at a temperature platform of 25 °C under an optical density of 1 kW m<sup>–2</sup>; schematic illustration of fresh water production based on the CC-BPHPLS; ion rejection of actual seawater undergoing the solar-driven wastewater purification under 1 sun illumination; ion rejection of artificial heavy metal ion solution undergoing solar energy-driven wastewater purification under 1 sun illumination; characterization of mechanical properties of CC-BPHPLS; and comparison of the solar-thermal conversion efficiency using various photothermal materials under 1 sun illumination (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07091/suppl_file/am1c07091_si_001.pdf">PDF</a>)Instantaneous wettability experiments with the CC-BPHPLS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07091/suppl_file/am1c07091_si_002.mp4">MP4</a>)Folding properties of a piece of CC-BPHPLS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07091/suppl_file/am1c07091_si_003.mp4">MP4</a>)Fire resistance of CC-BPHPLS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07091/suppl_file/am1c07091_si_004.mp4">MP4</a>)Steam generation process (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07091/suppl_file/am1c07091_si_005.mp4">MP4</a>)This article has not yet been cited by other publications.

Harnessing synchronous photothermal and photocatalytic effects of cryptomelane-type MnO 2 nanowires towards clean water production

Synergy of photocatalysis and photothermal effect in integrated 0D perovskite oxide/2D MXene heterostructures for simultaneous water purification and solar steam generation

Boosting Solar Photothermal Synergy for Efficient Overall Water Splitting Based on Mg, Al Codoped and Rh/Cr2O3/CoOOH Coloaded SrTiO3

Highly Efficient Solar Steam Generation by Hybrid Plasmonic Structured TiN/mesoporous Anodized Alumina Membrane

Boosting clean water evaporation and sustainable water treatment by photothermally induced artificial system

Nanoparticle Superlattices As Efficient Bifunctional Electrocatalysts for Water Splitting.

Synergism of Interface and Electronic Effects: Bifunctional N-Doped-Ni3S2/N-Doped-MoS2 Heteronanowires for Efficient Electrocatalytic Overall Water Splitting.

Hybrid nanoarchitectonics of carbon/titanium carbide integrated hydrogel/melamine foam for highly efficient solar steam and thermoelectric power generation

Dual-phase molybdenum nitride nanorambutans for solar steam generation under one sun illumination

CNTs/Wood Composite Nanogenerator for Producing Both Steam and Electricity

Co‐Hydrothermal Carbonization of Cotton Stalks and MnO 2 for Direct Solar Steam Generation with High Efficiency

Cu-based MOF-derived porous carbon with highly efficient photothermal conversion performance for solar steam evaporation

Construction of hierarchical 2D/2D Ti3C2/MoS2 nanocomposites for high-efficiency solar steam generation

Efficient solar-driven freshwater generation through an inner hierarchical porous metal-carbon layer bridging synergistic photothermal evaporation and adsorption-photodegradation

Scalable, eco-friendly and ultrafast solar steam generators based on one-step melamine-derived carbon sponges toward water purification

Customized Microenvironments Spontaneously Facilitate Coupled Engineering of Real‐life Large‐Scale Clean Water Capture and Pollution Remediation

Synergistic photothermal conversion and photocatalysis in 2D/2D MXene/Bi2S3 hybrids for efficient solar-driven water purification

Harvesting Solar Energy by Flowerlike Carbon Cloth Nanocomposites for Simultaneous Generation of Clean Water and Electricity

Porous Architectures Based on Halloysite Nanotubes As Photothermal Materials for Efficient Solar Steam Generation

Biomimetic MXene‐Polyvinyl Alcohol Composite Hydrogel with Vertically Aligned Channels for Highly Efficient Solar Steam Generation

N-Doped Graphene Aerogels Decorated by MoS 2 Nanoflowers for Steam Generation under Low Solar Flux