Highly Durable and Active Electrocatalysts Using Pt Nanorod Catalysts Supported on Nb Doped SnO2 for Polymer Electrolyte Fuel Cells Operating at Wide Temperature Range
Makoto Uchida,K. Kakinuma,Tetsuro Tano,Guoyu Shi,A. Iiyama
DOI: https://doi.org/10.1149/ma2023-02402011mtgabs
2023-12-22
ECS Meeting Abstracts
Abstract:The improvement of the durability and activity in cathode catalyst is required toward the wide spread use of polymer electrolyte fuel cells. One of the interesting catalysts is the Pt catalysts supported on SnO2 (Pt/M-SnO2, M = Nb, Ta) without carbon additives [1,2]. The durability (startup/shutdown, load cycling) and oxygen reduction reaction (ORR) activity of the Pt/M-SnO2 is superior to those of commercial Pt catalysts supported on carbon black (Pt/CB) etc. [3-8]. The non-carbon support of M-SnO2 nanoparticles has a unique carbon-like microstructure of a fused-aggregate network structure, which supply the essential function of the electronically constructing pathways via necking of each support particles and the gas diffusion pathways via the open pores surrounded by particles. The Pt nanorod catalyst on M-SnO2 also improves the ORR activity as shown in the catalyst design concept (Fig. 1)[9]. The IV performance of the single cell using the Pt nanorod/Nb-SnO2 cathode catalyst layers at operating temperatures from 80oC to 120oC is quite high to approach the NEDO target performance (Fig. 2) with keeping high durability. The catalyst is considered to have possibilities for application of the heavy-duty vehicles operating at wide-temperature range (< 120oC)[10].
Acknowledgments
This work was partially supported by funds for the project “Electrolytes, Catalysts and Catalyst layers with Extraordinary Efficiency, power and Durability for PEFCs-2030 (ECCEED’30) from the New Energy and Industrial Technology Development Organization (NEDO) of Japan, and JSPS KAKENHI Grant Number (23H02059) from the Ministry of Education, Culture, Sports, Science and Technology.
References
A. Masao, S. Noda, F. Takasaki, K. Ito, K. Sasaki, Electrochem. Solid-State Lett.,12, B119 (2009).
E. Fabbri, A. Rabis, R. Kötz, T.J. Schmidt, Phys. Chem. Chem. Phys., 16, 13672 (2014).
K. Kakinuma, M. Uchida, T. Kamino, H. Uchida, M. Watanabe, Electrochim. Acta, 56, 2881 (2011).
Y. Senoo, K. Kakinuma, M. Uchida, H. Uchida, S. Deki, M. Watanabe, RSC Adv., 6, 321800 (2014).
Y. Chino, K. Taniguchi, Y. Senoo, K. Kakinuma, M. Watanabe, M. Uchida, J. Electrochem. Soc., 162, F736 (2015).
K. Kakinuma, R. Kobayashi, A. Iiyama, M. Uchida, J. Electrochem. Soc., 165, J3083 (2018).
K. Kakinuma, K. Suda, R. Kobayashi, T. Tano, C. Arata, I. Amemiya, S. Watanabe, M. Matsumoto, H. Imai, A. Iiyama, M. Uchida, ACS Appl. Mater. Interfaces
11, 34957 (2019).
K. Kakinuma, M. Hayashi, T. Hashimoto, A. Iiyama, M. Uchida, ACS Appl. Energy Mater., 3, 6922 (2020).
G. Shi, T. Tano, D.A. Tryk, A. Iiyama, M. Uchida, K.Kakinuma, ACS Catal., 11, 5222 (2021).
K. Kakinuma, H. Taniguchi, T. Asakawa, T. Miyao, M. Uchida, Y. Aoki, T. Akiyama, A. Masuda, N. Sato, A. Iiyama J. Electrochem. Soc.
169 (2022) 044522.
Figure 1
Chemistry,Engineering,Materials Science