Abstract:Additive manufacturing (AM) technologies have gained considerable attention in recent years as an innovative method to produce high entropy alloy (HEA) components. The unique and excellent mechanical and environmental properties of HEAs can be used in various demanding applications, such as the aerospace and automotive industries. This review paper aims to inspect the status and prospects of research and development related to the production of HEAs by AM technologies. Several AM processes can be used to fabricate HEA components, mainly powder bed fusion (PBF), direct energy deposition (DED), material extrusion (ME), and binder jetting (BJ). PBF technologies, such as selective laser melting (SLM) and electron beam melting (EBM), have been widely used to produce HEA components with good dimensional accuracy and surface finish. DED techniques, such as blown powder deposition (BPD) and wire arc AM (WAAM), that have high deposition rates can be used to produce large, custom-made parts with relatively reduced surface finish quality. BJ and ME techniques can be used to produce green bodies that require subsequent sintering to obtain adequate density. The use of AM to produce HEA components provides the ability to make complex shapes and create composite materials with reinforced particles. However, the microstructure and mechanical properties of AM-produced HEAs can be significantly affected by the processing parameters and post-processing heat treatment, but overall, AM technology appears to be a promising approach for producing advanced HEA components with unique properties. This paper reviews the various technologies and associated aspects of AM for HEAs. The concluding remarks highlight the critical effect of the printing parameters in relation to the complex synthesis mechanism of HEA elements that is required to obtain adequate properties. In addition, the importance of using feedstock material in the form of mix elemental powder or wires rather than pre-alloyed substance is also emphasized in order that HEA components can be produced by AM processes at an affordable cost.

Synthesis of Refractory High-Entropy Alloy WTaMoNbV by Powder Bed Fusion Process Using Mixed Elemental Alloying Powder

In-Situ Alloy Formation of a WMoTaNbV Refractory Metal High Entropy Alloy by Laser Powder Bed Fusion (PBF-LB/M)

Manufacturing and Analysis of High-Performance Refractory High-Entropy Alloy via Selective Laser Melting (SLM)

Laser Powder Bed Fusion Processing of Low Cost CoCrFeNiMoxNby High Entropy Alloys with Promising High-Temperature Properties via In Situ Alloying Commercial Powders

A high-density non-equiatomic WTaMoNbV high-entropy alloy: Alloying behavior, microstructure and mechanical properties

High Strength and Ductility on Ni6W2Cr4Fe8Ti1 High Entropy Alloys by Selective Laser Melting

Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend

The Thermal-Mechanical Behavior of WTaMoNb High-Entropy Alloy Via Selective Laser Melting (SLM): Experiment and Simulation

Selective electron beam melting of WMoTaNbVFeCoCrNi refractory high-entropy alloy

On the Development of Pseudo-Eutectic AlCoCrFeNi2.1 High Entropy Alloy Using Powder-bed Arc Additive Manufacturing (PAAM) Process

Re-Melting Behaviour and Wear Resistance of Vanadium Carbide Precipitating Cr27.5Co14Fe22Mo22Ni11.65V2.85 High Entropy Alloy

Microstructure and Mechanical Properties of WTaVCrTi Refractory High-Entropy Alloy by Vacuum Levitation Melting for Fusion Applications

Ultra Strong FCC Structured Ni8Cr4Co4Fe6W2 High Entropy Alloys with High Strength and Ductility by Laser Powder Bed Fusion

Enhancing the Strength and Plasticity of Laser Powder Bed Fused NbMoTaW Refractory High-Entropy Alloy Via Ti Alloying

Additive Manufacturing Technologies of High Entropy Alloys (HEA): Review and Prospects

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

A two-phase ultrafine-grained NbMoTaWV refractory high entropy alloy with prominent compressive properties

Transitional and refractory elements-based high entropy alloy developed through mechanical alloying and microwave sintering: Tribological and corrosion responses

In-situ Alloyed CoCrFeMnNi High Entropy Alloy:Microstructural Development in Laser Powder Bed Fusion

Design of heterogeneous structure for enhancing formation quality of laser-manufactured WTaMoNb refractory high-entropy alloy