Abstract:07Cr16Ni6 alloy is a kind of martensitic-austenitic duplex stainless steel that is widely used in aviation and aerospace. Electrochemical machining (ECM) is an ideal manufacturing process for 07Cr16Ni6 alloy because of its high machining accuracy and good final surface quality. Studying the electrochemical dissolution behavior is pre-requisite and key to optimizing the ECM process; however, few studies have focused on the electrochemical dissolution behavior of 07Cr16Ni6 alloy. In this work, the corrosion behavior, passivation characteristics, efficiency curves, and material-removal process of 07Cr16Ni6 alloy in NaNO3 solution were comprehensively investigated. Based on the curves of potentiodynamic polarization and conductivity curve, it was found that both of them have significant passive and transpassive characteristics. The results of X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy indicated that the passive film was mainly composed of Fe3O4, α-Fe2O3, γ-Fe2O3, Cr2O3, NiO, SiO, and SiO2, and its structure was composed of a dense inner-layer film and a loose outer-layer film. A schematic model was proposed to characterize the interface structure between the 07Cr16Ni6 alloy, the passive film and electrolyte. ECM tests were performed at different current densities and for different corrosion times. The current-efficiency results indicate that the material-removal rate can be divided into three regions. The current efficiency first rises gently, then rises steeply once the current density exceeds 26 A cm−2; it finally remains stable at current densities greater than 45 A cm−2. The corrosion morphology exhibits loose, blocky bulges at low current density, while the surface exhibits lath-type martensite structures when the current density j > 15 A cm−2. The material-dissolution process of the 07Cr16Ni6 alloy in NaNO3 solution at 20 A cm−2 was presented. Finally, a model of dissolution was established to characterize the electrochemical dissolution of the 07Cr16Ni6 alloy in NaNO3 solution.

The Anisotropic Electrochemical Machinability of Laser Cladding Deposited Ti6Al4V Alloy in NaCl Solution

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Anodic Dissolution Behavior of DD6 Nickel-Based Single Crystal Superalloy for Electrochemical Machining Applications

Anodic dissolution behavior of the complex microstructure of laser directed energy deposited Alloy 718 during electrolyte jet machining in NaCl-ethylene glycol electrolyte

Distinction in electrochemical behaviour of Ti6Al4V alloy produced by direct energy deposition and forging

Surface morphology and electrochemical behaviour of Ti-48Al-2Cr-2Nb alloy in low-concentration salt solution

Electrolyte Jet Machining of Ti1023 Titanium Alloy Using NaCl Ethylene Glycol-Based Electrolyte

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Effect of Anodic Behavior on Electrochemical Machining of TB6 Titanium Alloy

Jet Electrochemical Micromilling of Ti-6Al-4V Using NaCl–Ethylene Glycol Electrolyte

Study on the Effect of Electrolytes on Processing Efficiency and Accuracy of Titanium Alloy Utilizing Laser and Shaped Tube Electrochemical Machining

Electrochemical dissolution and passivation of laser additive manufactured Ti6Al4V controlled by elements segregation and phases distribution

The anisotropy of corrosion and passive behavior in selective laser melted Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Electrochemical Properties and Jet Electrochemical Micromilling of (TiB+TiC)/Ti6Al4V Composites in NaCl+NaNO3 Mixed Electrolyte

Titanium Alloy Ti-6Al-4V Electrochemical Dissolution Behavior in NaNO3 and NaCl Solutions at Low Current Density

Anisotropic Response of CoCrFeMnNi High-Entropy Alloy Fabricated by Selective Laser Melting

A hybrid short electric arc and electrochemical machining of the Ti6Al4V alloy

Electrochemical dissolution behavior of 07Cr16Ni6 alloy in sodium nitrate solution

Processing of titanium alloys with improved efficiency and accuracy by laser and electrochemical machining

Surface characteristics of additively manufactured γ-TiAl intermetallic alloys post-processed by electrochemical machining

Electrochemical Micromachining on Titanium Using the NaCl-containing Ethylene Glycol Electrolyte