Abstract:The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer, which is beneficial to shape and property control in wire arc additive manufacturing. In this paper, with the wire feeding speed as a characteristic quantity, the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio (under the condition of a constant total current), the wire current/main current and the position of the wire in the arc axial direction. The results showed that under the premise that the total current remains unchanged (100 A), as the current separation ratio increased, the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power, the first melting mass range remained constant; the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed, and the second melting mass range was expanded. When the wire current increased, the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount; however, when the main current increased, the plasma arc power was the only factor causing the increase in the wire melting amount. The average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc power. The minimum melting amount was not affected by the wire-torch distance under any current separation ratio tested. When the current separation ratio increased and reached a threshold, the middle melting amount remained constant with increasing wire-torch distance. When the current separation ratio continued to increase and reached the next threshold, the maximum melting amount remained constant with the increasing wire-torch distance. The effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation ratio. Through this study, the decoupling mechanism and ability of this innovative arc heat source is more clearly.

Numerical Analysis of Physical Characteristics and Heat Transfer Decoupling Behavior in Bypass Coupling Variable Polarity Plasma Arc

Effects of bypass current on physical field and thermal decoupling in hybrid variable-polarity plasma arc

Numerical Analysis of Arc Physics and Energy Transfer under Circumferential Gas Constraint Effect

Metal transfer and forming behavior of bypass-coupled variable polarity plasma arc additive manufacturing

3D Numerical Investigation of a Free-Burning Argon Arc with Metal Electrodes Using a Novel Sheath Coupling Procedure

The flow and forming mechanism in the bypass hybrid variable polarity plasma arc additive manufacturing

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Numerical Study of Plasma–Electrode Interaction During Arc Discharge in a DC Plasma Torch

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

A more precise unified model to describe comprehensive multiphysics and multiphase phenomena in plasma arc welding

Two-dimensional modelling of a DC arc plasma furnace with opposite cathode and anode

Coupled Mechanisms of the Keyhole, Energy Transfer and Compositional Change Associated with the Variable Polarity Plasma Arc Process

Experimental Study on Wire Melting Control Ability of Twin-Body Plasma Arc

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Numerical Analysis of Internal Flow of Molten Pool in Pulsed Gas Tungsten Arc Welding Using a Fully Coupled Model with Free Surface

Research on suppression of cross coupled arc oscillation behavior

Numerical Study of Keyhole Behaviors and Thermal Fluid Flow in High Current Plasma Arc Welding

Bypass-current plasma arc welding of aluminum alloy: thermal behavior, residual stress, and distortion

Effect of Cathode-Plasma Coupling on Plasma Torch Operation Predicted by a 3D Two-Temperature Electric Arc Model

Simulation and control of metal droplet transfer in bypass coupling wire arc additive manufacturing

Numerical Study of Arc Plasmas and Weld Pools for Gtaw with Applied Axial Magnetic Fields