Abstract:In a DC plasma spray torch, the plasma-forming gas is the most intensively heated and accelerated at the cathode arc attachment due to the very high electric current density at this location. A proper prediction of the cathode arc attachment is, therefore, essential for understanding the plasma jet formation and cathode operation. However, numerical studies of the cathode arc attachment mostly deal with transferred arcs or conventional plasma torches with tapered cathodes. In this study, a 3D time-dependent two-temperature model of electric arc combined with a cathode sheath model is applied to the commercial cascaded-anode plasma torch SinplexPro fitted with a wide single cathode. The model is used to investigate the effect of the cathode sheath model and bidirectional cathode-plasma coupling on the predicted cathode arc attachment and plasma flow. The model of the plasma-cathode interface takes into account the non-equilibrium space-charge sheath to establish the thermal and electric current balance at the interface. The radial profiles of cathode sheath parameters (voltage drop, electron temperature at the interface, Schottky reduction in the work function) were computed on the surface of the cathode tip and used at the cathode-plasma interface in the model of plasma torch operation. The latter is developed in the open-source CFD software Code_Saturne. It makes it possible to calculate the plasma flow fields inside and outside the plasma torch as well as the enthalpy and electromagnetic fields in the gas phase and electrodes. This study shows that the inclusion of the cathode sheath model in the two-temperature MHD model results in a higher constriction of the cathode arc attachment, more plausible cathode surface temperature distribution, more reliable prediction of the torch voltage and cooling loss, and more consistent thermal balance in the torch.

Effects of bypass current on physical field and thermal decoupling in hybrid variable-polarity plasma arc

The flow and forming mechanism in the bypass hybrid variable polarity plasma arc additive manufacturing

Current–voltage Characteristics of Hydrogen DC Plasma Torches with Different Sizes in an External Axial Magnetic Field

Metal transfer and forming behavior of bypass-coupled variable polarity plasma arc additive manufacturing

Effect of Cathode-Plasma Coupling on Plasma Torch Operation Predicted by a 3D Two-Temperature Electric Arc Model

Numerical study on the effects of discharge parameters on vacuum arc plasma

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Numerical Study of Plasma–Electrode Interaction During Arc Discharge in a DC Plasma Torch

Two-dimensional modelling of a DC arc plasma furnace with opposite cathode and anode

A coupled plasma‐thermal model for hollow cathode power decomposition and parametric analysis

Two-dimensional Modeling Concerning the Effects of the Boundary Conditions along the Cathode Sheath-arc Column Interface on the Characteristics of the Dual-jet Arc Plasmas

Finite volume simulation of arc: pinching arc plasma by high-frequency alternating longitudinal magnetic field

Numerical Simulation of Gliding Arc Plasma Motion Characteristics

Effect Of A Near-Cathode Sheath On Heat Transfer In High-Pressure Arc Plasmas

3D Numerical Investigation of a Free-Burning Argon Arc with Metal Electrodes Using a Novel Sheath Coupling Procedure

Parametric study of thermal effects in a capillary dielectric-barrier discharge related to plasma jet production: Experiments and numerical modelling

Three-dimensional, Nonequilibrium Effects in a High-Intensity Blown Arc

Effects of induction coil parameters of plasma torch on the distribution of temperature and flow fields

Modeling and Simulation of Vacuum Arc Plasma Transport Properties Under the Influence of Anode Melting Pool

Influence of residual plasma drift velocity on the post-arc sheath expansion of vacuum circuit breakers

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior