Abstract:Corrosion degradation mechanics play a significant role in the safe operability and availability of aircraft components. To defend against corrosion, coating systems and insulation are used on aircraft structures to protect them from corrosion promoters. Due to this layer of protection, corrosion under insulation (CUI) and early onset corrosion remain difficult to characterize on exterior aircraft structures in a timely manner. Pulsed eddy current thermography (PECT) shows promise in enabling the detection of corrosion on aircraft while rapidly scanning large areas. However, the limitations of this technique and appropriate measurement parameters have yet to be explored on painted aluminum aircraft structures. In this work, pulsed phase thermography using electromagnetic coil excitation was performed on painted corroded aluminum samples to capture thermal transient localized responses for defect characterization. Defects ranging from 0.4 mm to 5 mm in a painted corroded aluminum sample were identified using PECT through the capture and analysis of changes in phase and amplitude. The results show that saturation of thermal response from larger defects overshadows smaller outlying defects, suggesting the need for an alternative approach to characterizing defects smaller than 1 mm in diameter. Despite inherently longer measurement times, phase measurements during the cooling period result in higher sensitivity thus enabling detection of smaller defects. This study helps to define a range of operation and measurement parameters for PECT to be effective as a means for corrosion detection on aluminum painted panels. The outcomes pave the way to further extend PECT as a non-destructive, non-contact method for detection of CUI.

Characterisation and evaluation of paint-coated marine corrosion in carbon steel based on pulsed eddy current thermography and BEMD noise-reducing method

Characterisation and Evaluation of Paint-Coated Marine Corrosion in Carbon Steel Using Eddy Current Pulsed Thermography

Comparison Research on Characterization and Evaluation Approaches for Paint Coated Corrosion Using Eddy Current Pulsed Thermography

Eddy Current Pulsed Thermography for Steel Corrosion Characterization

Improved Magnetic-Based Apparatus Enables Non-Destructive and High Sensitive Steel-Bar Corrosion Detection

Pulse-Modulation Eddy Current Imaging for 3D Profile Reconstruction of Subsurface Corrosion in Metallic Structures of Aviation

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Corrosion Evaluation Using Clustering Method Based on Eddy Current Pulsed Thermography

Deep Boltzmann machine for corrosion classification using eddy current pulsed thermography

Non-destructive evaluation of weld defect with coating using electromagnetic induction thermography

Detection of corrosion under insulation on aerospace structures via pulsed eddy current thermography

A Composite Approach of Electromagnetic Acoustic Transducer and Eddy Current for Inner and Outer Corrosion Defects Detection

Classification of Corrosion Severity in SPCC Steels Using Eddy Current Testing and Supervised Machine Learning Models

An Online Monitoring Approach of Carbon Steel Corrosion via the Use of Electrochemical Noise and Wavelet Analysis

Lift-off Nulling and Internal State Inspection of Multi-Layer Conductive Structures by Combined Signal Features in Pulsed Eddy Current Testing

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Nondestructive evaluation of carbon fiber reinforced polymer (CFRP)-steel interfacial debonding using eddy current thermography

Study on influencing factors and regularity analysis of eddy current method applied to detection of reinforcement corrosion