Abstract:Red mud, which could cause numerous problems to the environment, is a hazardous waste generated from the alumina smelting industry. In general, the storage and harmless utilization of red mud are hard to implement due to its fine particle size and high alkalinity. This study put forward a novel process to separate iron (MgFe2O4) and alumina (Al2O3) in red mud by a magnetization sintering method. The magnesium oxide was added to transform the nonmagnetic Fe2O3 into magnetic MgFe2O4 to achieve physical separation of iron-bearing minerals, and the alumina-bearing minerals were converted into dissoluble NaAlO2 minerals in a one-step reaction. The atmospheric pressure leaching process was adopted in this study for alumina resource recovery. To achieve clean alumina production, the silicate in the leaching solution was removed by adding the slightly soluble CaSO4, and the entire process becomes clean and harmless. The feasibility of the process was verified by thermodynamic analysis, and a series of experiments were performed to detect the optimum MgO/(Fe2O3 + MgO) ratio and the calcining and leaching conditions. The morphological and mineralogical characteristics of modified red mud, leaching red mud, and magnetic separation product were studied by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS). It was observed that under the optimal conditions with MgO/(Fe2O3 + MgO) of 14.89% to recover iron and aluminum, the corresponding recovery rates were 67.54% and 73.01% respectively, and the iron grade was 30.46%. The EDS results showed that the obtained Mg/Fe ratio of the magnetic separation product was 0.4677–0.528, which is slightly different from that of the standard MgFe2O4 at 0.5. This new method can promote the development of comprehensive utilization of red mud and iron production.

Transformation Behavior of Iron Minerals in High-Iron Red Mud During High-Pressure Hydrothermal Reduction

Investigation of the smelting reduction mechanism and of iron extraction from high-iron red mud

Reductive roasting of red mud with carbon and sulfuric acid dissolution of iron and aluminum: Transformation phases and leaching characteristics

Study on Magnetization Roasting Kinetics of High-Iron and Low-Silicon Red Mud

Carbothermal reduction of red mud for iron extraction and sodium removal

Iron Extraction from Red Mud using Roasting with Sodium Salt

Cleaning Disposal of High-Iron Bauxite Residue Using Hydrothermal Hydrogen Reduction

Recovery of iron from high-iron red mud using suspension magnetization roasting and magnetic separation

An efficient and clean utilization technique for red mud based on fluidized bed carbon monoxide reduction

Clean utilization of high-iron red mud by suspension magnetization roasting

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Experiment study on the high-phosphorus hematite carbothermal reduction in microwave field

Increasing Iron Recovery from High-Iron Red Mud by Surface Magnetization

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Hydrogen Reduction of Red Mud for Extraction of Metallic Values

Cellular ATP Synthesis Mediated by Type III Sodium-dependent Phosphate Transporter Pit-1 Is Critical to Chondrogenesis*

Effects of NaOH Content on the Reduction Kinetics of Hematite by Using Suspension Magnetization Roasting Technology

Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation

Minerals phase transformation by hydrogen reduction technology: A new approach to recycle iron from refractory limonite for reducing carbon emissions

Iron Recovery from Red Mud Using Carbothermic Roasting with Addition of Alkaline Salts

Kinetics and Mechanism of Red Mud Carbothermic Reduction and Reduced Iron Grain Growth: An Influence of Sodium Sulfate