Normal molecular size of the Na(+)-phosphate cotransporter and normal Na(+)-dependent binding of phosphonoformic acid in renal brush border membranes of X-linked Hyp mice.

H. Tenenhouse,J. Lee,N. Harvey,M. Potier,M. Jetté,R. Béliveau

DOI: https://doi.org/10.1016/0006-291X(90)90533-S

1990-08-16

Abstract:

What problem does this paper attempt to address?

Characterisation and distribution of microplastics in the inner shelf sediments of the southeast coast of India, Bay of Bengal

Harikrishnan, S

DOI: https://doi.org/10.1007/s12040-024-02307-1

2024-06-09

Journal of Earth System Science

Abstract:Microplastics (MPs) are one of the major substantial pollutants in the environment and are stored in sediments worldwide, especially in marine environments. This study shed light on the abundance, distribution, sources and chemical composition of MPs present in the surface sediments collected from the shelf part of the southeast coast of India, Bay of Bengal. A total of twenty-seven surface sediment samples were collected to study MPs pollution. The abundance and morphological characteristics of MPs were determined by counting using an Olympus SXZ7 stereo microscope. Raman spectroscopy analysis was used to identify the polymer type of the MPs. The average abundance of MPs in the study area is 460±275 MPs/kg in dry sediment. Regarding colour, transparent particles were predominant (46.42%), followed by blue, green, brown, etc. With respect to particle shape and size, fibres and 500-μm sized MPs are abundant. Polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), high-density polyethylene (HDPE), low-density polyethylene (LDPE) and polystyrene (PS) are the polymer types characterised in the study area. The higher abundance of MPs in the study area can be attenuated to human interruptions, viz., tourism, fishing and inappropriate sewage disposal in the marine environment. In addition to this, population density also plays an important role in providing MPs to the marine environment. This study provides the most valuable data to extrapolate the research for mitigating MP pollution in oceans. It also informs mankind about their disastrous activities on the marine environment, which is expected to recuperate quickly and negatively impact human health and the functionality of the marine system.

geosciences, multidisciplinary
Distribution of microplastics in seafloor sediments and their differential assimilation in nearshore benthic molluscs along the south-west coast of India

V.G. Nikhil,G.G. Amritha,K. Ranjeet,George K. Varghese

DOI: https://doi.org/10.1016/j.envpol.2024.123350

IF: 8.9

2024-01-14

Environmental Pollution

Abstract:Spatial and temporal distribution of microplastics (MPs) in the nearshore seafloor sediments along the Southwest coast of India and their patterns of accumulation in selected infaunal and epibenthic molluscs with diverse feeding strategies were investigated. Along the 300-km coastal stretch, which is one of the most productive and biodiversity rich regions of the eastern Arabian Sea, notable levels of MP contamination in both sediment (617.7 items/kg dry weight) and molluscs (5.39 items/g) was recorded. The concentration of MPs in sediments also varied seasonally, with a higher prevalence during the post-monsoon season. Among the four molluscan groups studied, the highest MP abundance was recorded among scavenging gastropod Pseudominolia biangulosa (9.13 items/g), followed by microcarnivore scaphopod Tesseracme quadrapicalis (5.96 items/g). In comparison, the suspension feeding bivalve, Anadara hankeyana and deposit feeding clam Jitlada philippinarum had lesser accumulation of MPs (2.98 items/g and 3.50 items/g respectively). The majority of MPs in sediments and within molluscs were less than 250 μm in size (89.14%) and were predominantly fibres and fragments. Chemical characterisation of MPs revealed eleven types of polymers dominated by polyethylene (PE) and polypropylene (PP). Present study identified positive correlations between ingested MP polymers and the feeding strategies of molluscs. Higher values for the ecological risk assessment indices (PHI, PLI and PERI) in most of the stations indicated the severity of plastic pollution in the region. Molluscs being a major contributor to the benthic food web is also a connecting link to higher trophic levels. Hence understanding the specificity in the MPs accumulation pattern within this group has far reaching significance in utilizing them as potential bioindicators for pollution studies in marine ecosystems.

environmental sciences
Microplastics in the sediments along the eastern Arabian Sea shelf: Distribution, governing factors and risk assessment

Priyansha Gupta,Mahua Saha,V. Suneel,Chayanika Rathore,A.V. Chndrasekhararao,G.V.M. Gupta,C.K. Junaid

DOI: https://doi.org/10.1016/j.scitotenv.2023.168629

2024-02-01

Abstract:Despite the omnipresence of microplastics (MPs), the studies around the western continental shelf of Indian Ocean (Eastern Arabian Sea-EAS) are uncovered and understudied. Thus, the present study was focused to understand the spatial distribution, characterization and risk assessment of MPs in sediment across seven coastal transects (10 to 50 m) all along the EAS shelf. The highest MPs concentration (MPs/kg d.w.) was detected in the northern EAS (NEAS; 2260 ± 1050) followed by central (CEAS; 1550 ± 1012) and southern (SEAS; 1300 ± 513) shelves. Among all distinct locations, the highest concentration of MPs (2500 ± 1042) was detected in the north coastal sediments off Mumbai, followed by off Mangalore (1480 ± 1169) in the center and off Kochi (1350 ± 212) in the south. MPs were found in the form of fibres, fragments and films with a predominance of fibres (~70-80 %). Approximately 74.6 % of the total MPs were in the size range of 300 μm to 5 mm. The surface of detected MPs was rough, irregular, and mechanical weathering features such as pits, grooves also observed and spotted with bacterial community structures. Polypropylene (PP; 34 %), polyisoprene (PIP; 19 %), butyl rubber (18 %), and low-density polyethylene (LDPE; 13 %) were dominant polymers. The pollution load index highlighted minor risk while the polymer hazard index exhibited a hazard level of V. Litter discharge, fishing activities, and active marine navigation are among the many high-risk sources of plastic contamination in this region. Due to the prevailing winds, currents, low sea surface height, and high precipitation, the conditions in the EAS are favorable for the accumulation of both sea-based and land-based particles. Hence, this study provides novel insights into the potential risks posed by MP to the IO rim and associated marine ecosystem which will enhance our knowledge of the ecological implications and consequences of MP pollution, ultimately aiding in developing effective management and mitigation strategies.

environmental sciences
Morphometric characteristics and spatiotemporal heterogeneity of microplastics on the north-east coast of India

I Anandavelu,R Karthik,R S Robin,G Hariharan,M Mugilarasan,R Ramesh,R Purvaja

DOI: https://doi.org/10.1016/j.jhazmat.2024.136180

2024-12-05

Abstract:The study analysed microplastics (MPs) in surface waters along the north-east coast of India and focused on the spatiotemporal distribution and morphometric characteristics of 800 particles for environmental insights. The MPs were consistently present in all water masses, with an average abundance of 0.67 ± 0.66 particles/m3 during the monsoon and 0.12 ± 0.08 particles/m3 post-monsoon. Fragments and fibers were dominant in both seasons, comprising over 83 % and 12 %, respectively. In terms of colours, blue was significantly dominant during the post-monsoon (H, χ2 (5) = 15.38, p < 0.01); however, such variation was absent during the monsoon. Spatially, significant variance in abundance (F4, 34 = 8.542; p < 0.01) and across colours and forms during the monsoon was correlated with land-based inputs from the Hooghly River. FTIR analysis revealed ten polymer types, predominantly polyethylene (44 %). SEM observations indicated that 80 % of particles exhibited polymer ageing from oxidative weathering. The size distribution of MPs varied notably, with a higher proportion of < 0.3 mm (16.7 %) during the monsoon, possibly due to increased particle disintegration. The study noted MPs had low to moderate circularity, with increased irregularity during the monsoon due to heavy precipitation and river flushing. An initial risk assessment of MP pollution in surface waters on the north-east coast revealed a low-risk state. Acrylonitrile butadiene styrene (ABS) was identified as the most hazardous MP polymer. A wide range of toxic trace elements were found in MPs in these waters. The findings from the study deepen our knowledge of MPs and their fate in the pelagic zone, which supports the development of science-based policies that effectively reduce MP pollution.
[Blister formation in lichen planus: electronmicroscopical observations (author's transl)].

H. Ebner,E. Erlach,W. Gebbart

1973-08-15

Abstract:
Microplastics and associated polycyclic aromatic hydrocarbons in surface water and sediment of the Bay of Bengal coastal area, India: sources, pathway and ecological risk

Kalpana Patidar,Balram Ambade,Mohammed Alshehri

DOI: https://doi.org/10.1007/s10653-024-01926-3

2024-04-24

Environmental Geochemistry and Health

Abstract:In the aquatic environment around the world, microplastic contamination has been a common and ongoing issue. Particularly, the ability of microplastics to absorb persistent organic pollutants (POPs) and then transmit these POPs to aquatic creatures has attracted a lot of interest. A stereomicroscope was used to detect the size, shape, and color of the microplastics (MPs), and Fourier Transform Infrared (FTIR) spectroscopy was used to identify the polymer composition of the MPs. To address MP transit, destiny, and mitigation, a study of MP pollution coastal areas is required. In the current study, MP pollution in the collected sample from upper layer of water and sediment of the Digha and Puri beaches along the coast of BOB was evaluated. The average concentration with SD of MPs observed in water was 5.3 ± 1.8 items/L whereas, in sediments, it was 173.4 ± 40.1 items/kg at Digha beach. The mean MPs abundance in the Puri beach was 6.4 ± 1.7 items/L in the water and 190.4 ± 28.0 items/kg in the sediments. The investigated total 16-PAHs concentrations were 164.7 ng/g, 121.9 ng/g, 73.6 ng/g, and 101.3 ng/g on the MPs surface of foam, fragment, fibers, and film respectively in the studied MPs sample. Smaller than 1000 μm size of MPs are distributed in the largest concentration. Fibers, films, fragments, and foam were the most common shapes of MPs. The molecular structure of MPs in water and sediment samples was analysed i.e., polyesters (PEs), polypropylene (PP), polyethylene (PE), polymethyl methacrylate (PMMA), polystyrene (PS), polyamide (PA), polycarbonates (PC), and polyurethane (PU). The obtained result offers an accurate assessment of the PLI, and the investigated polymer facilitates determining the polymer hazard levels, which emphasizes the risk associated with it.

environmental sciences,engineering, environmental,water resources,public, environmental & occupational health
A baseline study of microplastic pollution in a Southern Indian Estuary

Vishnu Unnikrishnan,Gokul Valsan,K Amrutha,Joju George Sebastian,Nelson Rangel-Buitrago,Rizwan Khaleel,Thara Chandran,S R Reshma,Anish Kumar Warrier

DOI: https://doi.org/10.1016/j.marpolbul.2022.114468

Abstract:Knowledge on the processes controlling the vertical distribution of microplastics (MPs) in estuaries is less. This research was carried out to determine the MP distribution in the surface, middle, and bottom layers of the Udyavara River Estuary in southwest India. The mean (± standard deviation) concentrations were 320.83 (± 98.30), 514.55 (± 352.16), and 755.03 (± 400.96) particles/m3, respectively. Fibres, films, and fragments dominated, and 57 % of the MPs had a size range of 0.3-1 mm, while 43 % had a size of 1-5 mm. The main polymers were high-density polyethylene and polyethylene terephthalate. A positive correlation (r = 0.421, p = 0.0205, n = 30) exists between the MPs and salinity, suggesting that the MPs are held by dense saline waters. The mean pollution load index value was 2.25 indicating severe pollution. Microplastic pollution is due to harbour, fishing, industrial activities, the effects of southwest monsoon rain, and tidal currents.
Total health needs of the rape victim.

A. Kaufman,S. Hilaski,P. Divasto,J. Vandermeer,B. Eppler

1975-06-01

Journal of family practice

Abstract:
Microplastic contamination in water and sediments of Mahanadi River, India: An assessment of ecological risk along rural-urban area

Kalpana Patidar,Balram Ambade,Santosh Kumar Verma,Faruq Mohammad

DOI: https://doi.org/10.1016/j.jenvman.2023.119363

2023-12-15

Abstract:Worldwide, environmental concerns about MPs pollution have increased. Microplastic contamination that pollutes the ocean is mostly caused by terrestrial transfer from close proximity locations. A study of MPs pollution near coastal locations becomes necessary to address the MPs transit, fate, and mitigation. In the current study MPs pollution in the surface water and sediment of the Mahanadi River estuary was assessed during Pre-MS and MS. The size, shape, and colour of the MPs were determined using a stereomicroscope, and the MPs polymer composition was identified by Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectroscopy. The mean concentration of MPs that were potentially discovered in water was 16.6 ± 5.2 and sediments 197.3 ± 5.4 during Pre-MS. In the MS observed mean abundance of MPs was 15.1 ± 5.4 in water and 164.6 ± 76.9 in sediments. The highest abundant size was smaller than 1 mm; the most prevalent shape were fibers followed by film and fragments; black and white was a prominent colour in water and sediments respectively. Polyesters (PEs), polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), polyamide (PA), Polystyrene (PS), and Polycarbonates (PC) were found in the analysis of the chemical composition of MPs in water and sediments samples. The calculated PLI value shows pollution load at category I, with polymer hazard levels at categories III, IV, and V, indicating very high risk. The current research results show that river inflows and fishing-related actions are probably the main causes of MPs pollution.
An assessment of microplastic contamination in beach sediment of Maharashtra State, India, with special reference to anthropogenic activities

Riddhi Shinde,Vasantkumar Rabari,Rishiraj Duggal,Ashish Patel,Sulaiman Ali Alharbi,Mohammad Javed Ansari,Jigneshkumar Trivedi

DOI: https://doi.org/10.1002/wer.11033

Abstract:The escalating issue of microplastic (MP) pollution poses a significant threat to the marine environment due to increasing plastic production and improper waste management. The current investigation was aimed at quantifying the MP concentration on 25 beaches on the Maharashtra coast, India. Beach sediments (1 kg) were collected from each site, with five replicates to evaluate the extent of MPs. The samples were homogenized, and three 20 g replicas were prepared for subsequent analysis. Later, the samples were sieved, and MPs were extracted using previously published protocols. The abundance of MPs found as 1.56 ± 0.79 MPs/g, ranges from 0.43 ± 0.07 to 3 ± 0.37 MPs/g. Fibers were found as the most abundant shape of MPs. Size-wise classification revealed dominance of <1 mm and 1-2 mm-sized MPs. Blue- and black-colored MPs were recorded dominantly. Polymer identification of MPs revealed polyurethane, polypropylene, polyvinyl chloride, acrylic or polymethyl methacrylate, and rubber. The findings revealed that MPs were found to be higher at highly impacted sites, followed by moderately impacted sites and low-impacted sites, possibly due to a different degree of anthropogenic pressure. The study recommended the urgent need for effective policy to prevent plastics accumulation in the coastal environment of Maharashtra State, India. PRACTITIONER POINTS: The study investigated the abundance and distribution of microplastics in the marine environment, specifically in sediments. The most common type of microplastic found was fibers, followed by fragments and films. Microplastics were found to pose a potential risk to the marine ecosystem, although further research is needed to fully understand their ecological impact. Future research should focus on expanding the sample size, assessing long-term effects, exploring sources and pathways, and considering size and shape of microplastics. The findings recommended urgent action to mitigate plastic pollution in Maharashtra coast.
Addiction to neuroleptics?

P. Breggin

DOI: https://doi.org/10.1176/ajp.146.4.560a

IF: 17.7

American Journal of Psychiatry

Abstract:
Microplastics in the marine environment of St. Mary's Island: implications for human health and conservation

Rizwan Khaleel,Gokul Valsan,Nelson Rangel-Buitrago,Anish Kumar Warrier,Warrier, Anish Kumar

DOI: https://doi.org/10.1007/s10661-023-11651-6

IF: 3.307

2023-08-13

Environmental Monitoring and Assessment

Abstract:Microplastics have now been identified as a class of emerging pollutants and is considered as a threat to aquatic organisms. This baseline paper investigated the distribution, composition, and potential ecological risks of microplastic (MP) pollution on St. Mary's Island, revealing an average abundance of 0.218 particles/L in water samples. Blue fibres and white foams were the primary MPs identified, and fishing activities and packaging were the main sources of pollution. Six types of polymers were identified: low-density polyethylene (LDPE), polystyrene (PS), polyamide (PA), polypropylene (PP), polyethylene (PE), and high-density polyethylene (HDPE). The Polymer Hazard Index (PHI) and Potential Ecological Risk Index (PERI) indicated a medium environmental risk for the island. Additionally, it was discovered that MPs' surfaces contained dangerous substances that could endanger aquatic life. The research emphasizes the significance of implementing measures such as responsible disposal, management, elimination, regulatory policies, and local administration techniques to mitigate the impact of MP pollution on the island's shores and marine biota. This research provides a baseline for monitoring MP contamination and underscores the need for continuous investigation to assess their impacts on marine life.

environmental sciences
Deciphering the seasonal dynamics of microplastic morphotypes and associated co-contaminants along the northwest coast of India

Ankita C Maurya,Amrik Bhattacharya,Varun Vij,Sunil K Khare,Ankita C. Maurya,Sunil K. Khare

DOI: https://doi.org/10.1016/j.chemosphere.2024.141690

IF: 8.8

2024-03-20

Chemosphere

Abstract:In the present study, the northwest coast of India, bordering the Arabian Sea, was selected to evaluate the microplastic (MP) abundance. This is the first study to emphasize the effects of different seasons on MP distribution. The collected MPs were dried, segregated, and evaluated based on their morphotype, size, color, and polymer type. A total of 1756.6, 7326.6, and 202 particles/kg of sand were estimated in the pre-monsoon, monsoon and post-monsoon seasons, respectively, with a dominance of polypropylene (PP) type of plastic in the pre-monsoon and high-density polyethylene (HDPE) in monsoon and post-monsoon seasons. HDPE and PP collected MPs during the monsoon season were further characterized for associated contaminants. Metal absorbance was detected using SEM-EDX mapping and ICP-MS. The presence of organic compounds (OCs) was analyzed using GC-MS. MPs exhibit distinct associations with metals, among which the HDPE pellet morphotype exhibits a higher range of metal adsorption. Total 61 different OCs were associated with MPs. The HDPE pellets contained the highest amounts of hydrophobic organic compounds. PP pellets were found to contain triglycerides, fatty aldehydes, and alkaloids, along with HOCs. Among morphotypes, pellet forms of MPs were found to adsorb more contaminants. These co-contaminants infiltrate the study area through sewage runoff and shoreline debris deposition, subsequently interacting with MPs. Furthermore, the MP diversity was studied by employing the MP diversity integrated index, which suggests that most of the MP diversity was observed in the pre-monsoon period. The pollution load index employed an MP risk assessment, which presented a low degree of MP contamination. In contrast, the polymer hazard index was calculated as 21650.3 in post-monsoon, placing the area under the extreme danger category. It is evident from the data that the types of MP is more important than their number. Thus, MP morphotypes have importance in the adsorption of co-contaminants.

environmental sciences
Microplastic Pollution in Surface Sediments of Coromandel Coastline, South-East Coast, India: Diversity Index, Carbonyl Index, Pollution Load Index, Risk Fraction and MPs Inventory

Mrunmayee Manjari Sahoo

DOI: https://doi.org/10.1016/j.envpol.2024.124179

IF: 8.9

2024-05-19

Environmental Pollution

Abstract:The investigation along the Coromandel coastline of South-east India focused on assessing microplastics abundance using Simpson's diversity index , Degradation-carbonyl index (), Pollution load index and Ecological risk fraction ). These indices evaluated the dissemination and transportation of MPs across a 1076 km stretch divided into five zones from Chennai to Kanyakumari. During the wet season, average microplastics abundance (101 ± 36.6 items/kg dw) was lower compared to the dry season (143 ± 56.2 items/kg dw). Notably, 54% and 45% of microplastics were found in the 0.1 to 0.5 mm size range, with 45% and 64% being colored microplastics, and 80% and 71% being fibers during the wet and dry seasons respectively. Micro-Fourier-transform infrared spectroscopy (μFTIR) analysis showed rayon (34%) and PE (64%) dominance in ports and estuaries during both seasons. Kottaipattinam Port exhibited higher diversity indices ( compared to other zones, with an overall diversity index of 0.57. Notably, among the values (n=96), only 12 fell within the moderate photo-chemical oxidation range (0.16-0.35), while the majority (n=60) surpassed 0.35 indicating higher oxidation levels, with some (n=24) exceeding 0.50, signifying extreme oxidation. revealed that 42% of sampling stations had very low to negligible MP contamination levels in ports and estuaries. However, ecological risk fraction values ranged from 10.2 to 13,670, with 27% of values exceeding 1500, indicating higher coastal ecological risk in 13 sampling stations.

environmental sciences
Current status of studies on microplastics in the world's marine environments

Nouha Bakaraki Turan,Hanife Sari Erkan,Guleda Onkal Engin

DOI: https://doi.org/10.1016/j.jclepro.2021.129394

IF: 11.1

2021-12-01

Journal of Cleaner Production

Abstract:Microplastics (MPs) are considered a new type of pollutant that invades different environmental regions. The gradual increase in consumption of plastic products has led to its abundance in the ecosystem as a result of degradation of larger plastics into smaller particles. A great scientific interest in this topic arose from a series of unknowns that fell into different research disciplines. This review aims to take a look at the latest research papers on the detection of MPs in the world's marine environments. Some of the recent studies performed in the marine environments of the Atlantic, Pacific, Indian, Arctic, and Southern regions are listed in this study. The highest number of MPs were found mainly in the Pacific ocean with an average concentration of 918 items/m3. However, the occurrence of MPs in the Atlantic, Arctic, Indian and Southern oceans reduced to 7.68 item/m3, 0.7 item/m3, 0.32 item/m3 and 0.022 items/m3, respectively. Average MPs concentration reported are based on the case studies listed in this paper. Additionally, this paper highlights the variety of equipment used for the detection of MPs in seawater and deep seawater. On the other hand, the mitigation of MPs occurrence was discussed noting the urgent need for global cooperation to reduce the use of plastics and increase the use of biodegradable and bioplastics. Finally, the importance of this study remains in the broad screening of MPs in the world's marine environment underlying existing research gaps and possible mitigation methods for MPs reduction.

environmental sciences,green & sustainable science & technology,engineering, environmental
Microplastic prevalence in epipelagic layer: Evidence from epipelagic inhabiting prawns of north-west Arabian Sea

Vasantkumar Rabari,Md Refat Jahan Rakib,Heris Patel,Abubakr M Idris,Guilherme Malafaia,Jigneshkumar Trivedi,Md. Refat Jahan Rakib,Abubakr M. Idris

DOI: https://doi.org/10.1016/j.marpolbul.2024.116137

IF: 5.8

2024-02-22

Marine Pollution Bulletin

Abstract:The escalating global microplastic (MP) pollution severely threatens marine life due to insufficient waste management and widespread single-use plastic. This study focuses on assessing MP contamination in commercial prawns from Gujarat State, India. Ten prawn species collected at five main fishing harbors revealed 590 MP particles in their gastrointestinal tracts, averaging 6.08 ± 5.96 MPs/g and 1.15 ± 0.78 MPs/individual. Significant variations in contamination levels were observed between species and study sites. Pollution indices indicated very high contamination throughout the study sites. Threads were the predominant shape, with blue and black as prevalent colors. Size-wise, 1–2 mm MPs dominated. Polymer analysis identified polyethylene terephthalate, polyurethane, polystyrene, polypropylene, polyvinyl chloride, and acrylonitrile butadiene styrene. The findings provided crucial preliminary information for ecotoxicology and seafood safety investigations regarding MP contamination in commercially important prawns.

environmental sciences,marine & freshwater biology
Unraveling the land-based discharge of microplastics from sewers to oceans – A comprehensive study and risk assessment in wastewaters of Goa, India

Chayanika Rathore,Mahua Saha,Jacob de Boer,Aniket Desai,Priyansha Gupta,Akshata Naik,Haritha Yespal Subha

DOI: https://doi.org/10.1016/j.scitotenv.2023.169621

IF: 9.8

2024-01-07

The Science of The Total Environment

Abstract:Owing to their pervasive dispersion in the environment and their potential ramifications on both marine life and human health, microplastics (MPs) are of increasing concern. However, there is still a lack of research on the release of MPs from different land-based pathways like creeks, drainage outfalls, and conduits into coastal water systems in India. This study represents comprehensive research into the attribution of MPs in the estuarine system, specifically those emanating from wastewater sources in Panjim City, Goa, India. Urban wastewater collected from different locations in and around Panjim City exhibited values ranging from 79 ± 21 to 338 ± 7 MPs/L, with a prevalence of fibrous and black MP particles. The size range of the MPs at all sampling sites was 100–300 μm. Analysis by μ-FTIR revealed 35 distinct polymeric compositions in wastewater, with a dominance of polyacrylamide (PAM), polyvinyl chloride (PVC), and polyamide (PA). Additionally, primary and secondary MPs were studied to unravel the contributions from land-based sources. This included the quantification of MPs in ten samples from personal care products (PCPs) and twenty samples from washing machine effluents (WMEs). MPs in PCPs ranged from 1.8 to 1554 MPs/g. Microfibres and fragments were predominant in WMEs (3986 to 4898 MPs/L). This study suggests a strong relation between polymers found in wastewater effluent and those present in PCPs and WMEs. The identified polymers showed high polymer hazard indices (IV and V), posing a significant threat to the ecosystem and a potential risk to human health.

environmental sciences
Microplastics, their abundance, and distribution in water and sediments in North Chennai, India: An assessment of pollution risk and human health impacts

K.S. Vignesh,V.N. Prapanchan,V.N. Indhiya Selvan,Natchimuthu Karmegam,Woong Kim,Damia Barcelo,Muthusamy Govarthanan,Vignesh K.S.

DOI: https://doi.org/10.1016/j.jconhyd.2024.104339

IF: 4.184

2024-04-01

Journal of Contaminant Hydrology

Abstract:Plastic particles, measuring <5 mm in size, mainly originate from larger plastic debris undergoing degradation, fragmenting into even smaller fragments. The goal was to analyze the spatial diversity and polymer composition of microplastics (MPs) in North Chennai, South India, aiming to evaluate their prevalence and features like composition, dimensions, color, and shape. In 60 sediment samples, a combined count of 1589 particles were detected, averaging 26 particles per 5 g<sup>-1</sup> of dry sediment. The water samples from the North Chennai vicinity encompassed a sum of 1588 particles across 71 samples, with an average of 22 items/L. The majority of MPs ranged in size from 1 mm to 500 μm. The ATR-FTIR results identified the predominant types of MPs as polystyrene, polyvinyl chloride, polyethylene, polyethylene terephthalate, and polypropylene in sediment and water. The spatial variation analysis revealed high MPs concentration in landfill sites, areas with dense populations, and popular tourist destinations. The pollution load index in water demonstrated that MPs had contaminated all stations. Upon evaluating the polymeric and pollution risks, it was evident that they ranged from 5.13 to 430.15 and 2.83 to 15,963.2, which is relatively low to exceedingly high levels. As the quantity of MPs and hazardous polymers increased, the level of pollution and corresponding risks also escalated significantly. The existence of MPs in lake water, as opposed to open well water, could potentially pose a cancer risk for both children and adults who consume it. Detecting MPs in water samples highlights the significance of implementing precautionary actions to alleviate the potential health hazards they create.

environmental sciences,water resources,geosciences, multidisciplinary
Possible sink of missing ocean plastic: Accumulation patterns in reef-building corals in the Gulf of Thailand

Suppakarn Jandang,María Belén Alfonso,Haruka Nakano,Nopphawit Phinchan,Udomsak Darumas,Voranop Viyakarn,Suchana Chavanich,Atsuhiko Isobe

DOI: https://doi.org/10.1016/j.scitotenv.2024.176210

2024-09-14

Abstract:Individual coral polyps contain three distinct components-the surface mucus layer, tissue, and skeleton; each component may exhibit varying extent of microplastic (MP) accumulation and serve as a short- or long-term repository for these pollutants. However, the literature on MP accumulation in wild corals, particularly with respect to the different components, is limited. In this study, we investigated the adhesion and accumulation of MPs in four coral species, including both large (Lobophyllia sp. and Platygyra sinensis) and small (Pocillopora cf. damicornis and Porites lutea) polyp corals collected from Si Chang Island in the upper Gulf of Thailand. The results revealed that MP accumulation varied significantly among the four coral species and their components. Specifically, P. cf. damicornis exhibited the highest degree of accumulation (2.28 ± 0.34 particles g-1 w.w.) [Tukey's honestly significant difference (HSD) test, p < 0.05], particularly in their skeleton (52.63 %) and with a notable presence of high-density MPs (Fisher's extract test, p < 0.05). The most common MP morphotype was fragment, accounting for 75.29 % of the total MPs found in the coral. Notably, the majority of MPs were black, white, or blue, accounting for 36.20 %, 15.52 %, and 11.49 % of the samples, respectively. The predominant size range of MP particles was 101-200 μm. Nylon, polyacetylene, and polyethylene terephthalate (PET) were the prevalent polymer types, accounting for 20.11 %, 14.37 %, and 9.77 % of the identified samples, respectively. In the large polyp corals, while MP shapes, colors, and sizes exhibited consistent patterns, remarkable differences were noted in the polymer types across the three components. The findings of this study improve the understanding of MP accumulation and its fate in coral reef ecosystems, underscoring the need for further investigation into MP-accumulation patterns in reef-building corals worldwide.
[Gastrointestinal hemorrhage in patients regularly treated with dialysis].

V. Vaněček,J. Kotrlik

1980-10-01

Abstract:

Normal molecular size of the Na(+)-phosphate cotransporter and normal Na(+)-dependent binding of phosphonoformic acid in renal brush border membranes of X-linked Hyp mice.

Characterisation and distribution of microplastics in the inner shelf sediments of the southeast coast of India, Bay of Bengal

Distribution of microplastics in seafloor sediments and their differential assimilation in nearshore benthic molluscs along the south-west coast of India

Microplastics in the sediments along the eastern Arabian Sea shelf: Distribution, governing factors and risk assessment

Morphometric characteristics and spatiotemporal heterogeneity of microplastics on the north-east coast of India

[Blister formation in lichen planus: electronmicroscopical observations (author's transl)].

Microplastics and associated polycyclic aromatic hydrocarbons in surface water and sediment of the Bay of Bengal coastal area, India: sources, pathway and ecological risk

A baseline study of microplastic pollution in a Southern Indian Estuary

Total health needs of the rape victim.

Microplastic contamination in water and sediments of Mahanadi River, India: An assessment of ecological risk along rural-urban area

An assessment of microplastic contamination in beach sediment of Maharashtra State, India, with special reference to anthropogenic activities

Addiction to neuroleptics?

Microplastics in the marine environment of St. Mary's Island: implications for human health and conservation

Deciphering the seasonal dynamics of microplastic morphotypes and associated co-contaminants along the northwest coast of India

Microplastic Pollution in Surface Sediments of Coromandel Coastline, South-East Coast, India: Diversity Index, Carbonyl Index, Pollution Load Index, Risk Fraction and MPs Inventory

Current status of studies on microplastics in the world's marine environments

Microplastic prevalence in epipelagic layer: Evidence from epipelagic inhabiting prawns of north-west Arabian Sea

Unraveling the land-based discharge of microplastics from sewers to oceans – A comprehensive study and risk assessment in wastewaters of Goa, India

Microplastics, their abundance, and distribution in water and sediments in North Chennai, India: An assessment of pollution risk and human health impacts

Possible sink of missing ocean plastic: Accumulation patterns in reef-building corals in the Gulf of Thailand

[Gastrointestinal hemorrhage in patients regularly treated with dialysis].