Abstract:Understanding laser interaction with metal powder beds is critical in predicting optimum processing regimes in laser powder-bed fusion (PBF) additive manufacturing (AM) of metals. In this work, we study the denudation of metal powders that is observed near the laser scan path as a function of laser parameters and ambient gas pressure. We show that the observed depletion of metal powder particles in the zone immediately surrounding the solidified track is due to a competition between outward metal vapor flux directed away from the laser spot and entrainment of powder particles in a shear flow of gas driven by a metal vapor jet at the melt track. Between atmospheric pressure and ~10 Torr of Ar gas, the denuded zone width increases with decreasing ambient gas pressure and is dominated by entrainment from inward gas flow. The denuded zone then decreases from 10 to 2.2 Torr reaching a minimum before increasing again from 2.2 to 0.5 Torr where metal vapor flux and expansion from the melt pool dominates. The dynamics of the denudation process were captured using high-speed imaging, revealing that the particle movement is a complex interplay among melt-pool geometry, metal vapor flow, and ambient gas pressure. The experimental results are rationalized through FE simulations of the melt-track formation and resulting vapor flow patterns. The results presented here represent new insights to denudation and melt-track formation that can be important for the prediction and minimization of void defects and surface roughness in additively manufactured metal components. The dynamics of the denudation process were captured using high-speed imaging, revealing that the particle movement is a complex interplay among melt-pool geometry, metal vapor flow, and ambient gas pressure. Understanding laser interaction with metal powder beds is critical in predicting optimum processing regimes in laser powder-bed fusion additive manufacturing of metals. Laser powder-bed fusion of metal powders is currently the dominant method for producing 3D-printed metal structures. Very rapid heating of the powder results in thermal expansion of the powder with high velocity and can produce lateral particle motion. The vapor flow induces an inward ambient gas flow that entrains particles and results in the denudation zone. Several complex processes influence the interaction of the rapidly formed melt pool and the surrounding particles. The particles are initially slightly displaced from the centerline, so as to put in evidence the particle motion as a result of a lateral force.

A Testbed for Investigation of Selective Laser Melting at Elevated Atmospheric Pressure

In-process monitoring and direct simulation of Argon shielding gas and vapour dynamics to control laser-matter interaction in laser powder bed fusion additive manufacturing

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Atmosphere Effects in Laser Powder Bed Fusion: A Review

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Benchmarking of Print Properties and Microstructures of 316L Stainless Steel Laser Powder Bed Fusion Prints

Melt-Pool Dynamics and Microstructure of Mg Alloy WE43 under Laser Powder Bed Fusion Additive Manufacturing Conditions

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing

Effect of laser focal point position on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

Systematic approach to process parameter optimization for laser powder bed fusion of low-alloy steel based on melting modes

Evolution of Melt Pool and Porosity During Laser Powder Bed Fusion of Ti6Al4V Alloy: Numerical Modelling and Experimental Validation

Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments

High-Temperature Mechanical Properties of Stress-Relieved AlSi10Mg Produced via Laser Powder Bed Fusion Additive Manufacturing

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Metal Vaporization and Its Influence During Laser Powder Bed Fusion Process

Development of a Laser Powder Bed Fusion Process Tailored for the Additive Manufacturing of High-Quality Components Made of the Commercial Magnesium Alloy WE43

Denudation of metal powder layers in laser powder-bed fusion processes

Selective Laser Melting under Variable Ambient Pressure: A Mesoscopic Model and Transport Phenomena