Co-doped MnS/NiS/Ni3S2 in situ grown on hydrophilic nickel foam for energy-efficient urea-assisted alkaline hydrogen production
Haojie Ma,Muzaffar Ahmad Boda,Yang Zhou,Chenhao Shi,Zhiguo Yi
DOI: https://doi.org/10.1039/d4se00442f
IF: 6.813
2024-05-08
Sustainable Energy & Fuels
Abstract:The electrochemical oxidation of urea provides a promising pathway for hydrogen production with reduced energy consumption,theoretically 93% lower than water electrolysis. Therefore, designing an efficient bifunctional non-noble metal based electrocatalyst capable of catalyzing both the urea oxidation reaction and hydrogen evolution reaction are of prominent importance. Herein, a Co-doped MnS/NiS/Ni 3 S 2 catalyst with complex structures of nanoparticles and nanosheets simultaneously grown on 3D hydrophilic nickel foam (HNF), is prepared by electrodeposition and a two-step hydrothermal method. The resulting catalyst (Co-MnS/NiS/Ni 3 S 2 /HNF) presents a remarkable performance as self-supported bifunctional electrode for UOR and HER, requiring only 1.313 V at 50 mA cm −2 and 34 mV at 10 mA cm −2 , respectively. At a high current density of 100 mA cm −2 , a potential of only 1.343 V is required for UOR, about 202 mV lower than OER carried in 1 M KOH to gain the same current density. Further, the performance of the electrocatalyst has no apparent deterioration under the stability test of 96 h for HER and UOR. Compared to traditional electrolytic cell for water splitting (OER||HER), the alkaline electrolytic cell we designed with bifunctional catalyst Co-MnS/NiS/Ni 3 S 2 /HNF shows a voltage reduction of 300 mV, by driving a current density of 100 mA cm −2 only at 1.75 V in 1 M KOH + 0.33 M urea. The Faradaic efficiency of hydrogen production is calculated to be about 100%. Overall, this work gives a new paradigm in the design of efficient bifunctional non-noble metal based electrocatalysts for HER and UOR in alkaline media.
materials science, multidisciplinary,chemistry, physical,energy & fuels