Abstract:The emerging market for consumer electronics and electric vehicles has stimulated intensive research on lithium metal batteries (LMBs) with high energy densities and large cycle lifetimes. A metallic Li anode has a high theoretical specific capacity of 3860 mAh.g(-1) and lowest redox potential of -3.04 V (vs. the standard hydrogen electrode) and is generally considered an ideal electrode for next-generation high-energy-density LMBs. However, their deployment in practical batteries is severely hindered by the formation of unsafe dendrites and fast capacity decay due to the uncontrollable formation of fragile solid electrolyte interfaces (SEls). Herein, we describe the stable cycling of carbon paper (Cp)-supported Li-Sn alloy anodes in carbonate electrolytes modified with 1 mol.L-1 bis(2,2,2-trifluorotoluene) carbonate (DTFEC). The molten Li-Sn alloy with 8% (mass fraction) Sn was synthesized through thermal treatment at 400 degrees C in an atmosphere of Ar. The Li-Sn-alloy-coated carbon paper (SnLi/Cp) was obtained after the molten alloy was conformally loaded onto the surface of a carbon paper under the action of capillarity. The as-synthesized interconnected SnLi/Cp composite was characterized by X-ray diffraction, energy-dispersive spectrometry, and scanning electron microscopy. The porous SnLi/Cp composite consisted of only Li and Sn5Li22 phases supported by the mechanically strong carbon paper with a good conductivity; no impurity was observed in the XRD results. The synergy of the DTFEC additive and alloying with Sn provided composite anodes with significantly improved rate capability and remarkable stability owing to the formation of a dense fluorinated SEI layer with high mechanical strength and ion penetration. Moreover, with the porous SnLi alloy covered by a fluorinated protection layer, lithium avoids the intrinsic issues of uncontrollable volume expansion and dendrite growth, which restrict the practical application of Li metal, exhibiting a stabilized over-potential of only 90 mV after 100 cycles at 8 mA.cm(-2). Notably, stable cycling with a 12 mu L lean electrolyte was also observed at 5 mA.cm(-2). Overall, the prototype full cell assembled with the SnLi/Cp anode and NMC811 cathode exhibited a high Coulombic efficiency (98.1%) and remarkable cycling stability for 300 cycles at 1C (1.5 mA.cm(-2)). The rate capability was evaluated at various rates of 0.5C to 5C. Compared to pure Li, the SnLi/Cp anode in the full cell exhibited a higher capacity, particularly at a high rate (similar to 126 mAh.g(-1 )at 5C). Our approach provides integrated Li metal electrodes with effectively improved cycle stabilities and is very attractive for practical high-energy-density lithium batteries.

Construction of a High-Stability and Low-Nucleation-Barrier Cu3Sn Alloy Layer on Carbon Paper for Dendrite-Free Li Metal Deposition

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

Lithiophilic Coating Layer Modify Three-Dimensional Cu Foam for Stable and Dendrite-Free Lithium Metal Anode

Enhancing the Electrochemical Stability of Lithium Anode by Introducing Lithiophilic Three-Dimensional Framework Li2Cu3Zn

Steady cycling of lithium metal anode enabled by alloying Sn-modified carbon nanofibers

Constructing Sn-Cu2O Lithiophilicity Nanowires As Stable and High-Performance Lithium Metal Anodes

A multifunctional Cu6Sn5 interface layer for dendritic-free lithium metal anode

Dendrite-free Li Metal Anode by Lowering Deposition Interface Energy with Cu99Zn Alloy Coating

Bottom-Up Li Deposition by Constructing a Multiporous Lithiophilic Gradient Layer on 3D Cu Foam for Stable Li Metal Anodes

3D Porous and Li-rich Sn–Li Alloy Scaffold with Mixed Ionic-Electronic Conductivity for Dendrite-Free Lithium Metal Anodes

Three-dimensional Electrode with Conductive Cu Framework for Stable and Fast Li-ion Storage

A 3D Lithiophilic Host for Dendrite‐Free Lithium Metal Anode via One‐Step Carbonization of an Energetic Metal‐Organic Framework

Guided lithium nucleation and growth on lithiophilic tin-decorated copper substrate

Improvement In Performance Of Three-Dimensional Snli/Carbon Paper Anode In Lean Electrolyte With In Situ Fluorinated Protection Layer

3D Lithiophilic Host Comprising Co2P Nanosheets and ZnO Nanorods for Stable Li Metal Anode

Revisiting porous foam Cu host based Li metal anode: The roles of lithiophilicity and hierarchical structure of three-dimensional framework

The effect of alloy type of lithophilic Cu-Sn interface layer on the deposition/stripping behavior of lithium metal anode

Uniform Li Deposition by Regulating the Initial Nucleation Barrierviaa Simple Liquid-Metal Coating for a Dendrite-Free Li–metal Anode

Lithiophilic polymer interphase anchored on laser-punched 3D holey Cu matrix enables uniform lithium nucleation leading to super-stable lithium metal anodes

Constructing Porous Nickel-Zinc Alloy Layer on Nickel Foam for Dendritic-Free Lithium Metal Anode