Abstract:Biomass adsorbents possess significant potential for both metal recovery from industrial leaching solutions and wastewater treatment. However, standalone biomass materials suffer from the drawback of low adsorption capacity. In this study, by the combination of metal–organic frameworks (MOFs) with organic biomaterials, a novel aerogel of aminated ZIF-8 composite cellulose (CPEZN) was developed for molybdenum ions adsorption, and the incorporation of aminated ZIF-8 improved the availability of reactive groups. The unique aerogel structure effectively prevented the accumulation of MOFs, thereby increasing the specific surface area and improving the exposure of active site. In addition, the positively charged surface of CPEZN effectively adsorbed molybdenum ions. Experimental results showed that the introduction of ZIF-8-NH 2 improved the adsorption performance of the composites. The adsorption of Mo(VI) followed the Langmuir adsorption isotherm model, and its adsorption rate followed the pseudo-second-order model. The adsorbent exhibited a maximum Mo(VI) adsorption capacity of 872.39 mg/g at pH = 3, and a removal rate of more than 80 % in mixed coexisting ion solutions. Moreover, the adsorbent demonstrated good stability, with a removal rate of above 80 % after 5 cycles of adsorption. Comprehensive characterizations revealed that the adsorption mechanism of Mo(VI) on CPEZN was a synergistic effect of chemisorption, electrostatic interaction, redox, and complex ligand processes. The simulated industrial wastewater adsorption experiment showed that the prepared adsorbent had good removal ability for molybdenum ions. This study not only provides a reference for the design and preparation of MOF and biomass-based composite adsorbent materials, particularly in terms of understanding the adsorption mechanism and designing high-capacity functional groups, but also provides a theoretical basis for its practical application.

Enhanced removal of P(V), Mo(VI) and W(VI) generated oxyanions using Fe-MOF as adsorbent from hydrometallurgical waste liquid: Exploring the influence of ionic polymerization

Efficient removal of Mo(VI) ions via adsorbing colloid flotation based on the synergic effect of metal salts and CTAB

MOF-5@Ni derived ZnO@Ni3ZnC0.7/PMS system for organic matter removal: A thorough understanding of the adsorption−degradation process

Waste organic dye removal using MOF-based electrospun nanofibers of high amine density

Efficient Removal of Cr(VI) Ions in Petrochemical Wastewater Using Fe3O4@Saccharomyces cerevisiae Magnetic Nanocomposite

Mechanistic investigation of intensified separation of molybdenum(VI) and vanadium(V) using polymer inclusion membrane electrodialysis

The hyper-crosslinked aniline polymer@MOFs hybrid materials reinforced with active ionic sites for efficient and fast Cr(VI) removal

Advancing wastewater treatment and metal recovery: Aminated ZIF-8 composite cellulose aerogel as an innovative biomass adsorbent for enhanced molybdenum ion adsorption

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Construction of hexagonal spindle-shaped Fe-MOFs induced by cationic copolymer and its application for effective wastewater treatment

Mechanistic insight of weak magnetic field trigger transformation of amorphous Fe(III)-(oxy)hydroxide for enhanced ferrate (VI) towards selective removal of natural organic matter

In situ preparation of a multifunctional adsorbent by optimizing the Fe 2+ /Fe 3+ /Mn 2+ /HA ratio for simultaneous and efficient removal of Cd(II), Pb(II), Cu(II), Zn(II), As(III), Sb(III), As(V) and Sb(V) from aqueous environment: Behaviors and mechanisms

Heavy metals removal using hydrogel-supported nanosized hydrous ferric oxide: Synthesis, characterization, and mechanism

Efficient removal of Cr(VI) from wastewater by ZnO-polyacrylic acid/cellulose fiber/polyethylene glycol hydrogel: Synergistic effect of adsorption and photocatalytic reduction

Preparation of Zwitterionic Hybrid Polymer and Its Application for the Removal of Heavy Metal Ions from Water.

Synergistic adsorption and oxidative degradation of polyvinyl alcohol by acidified OMS-2: Catalytic mechanism, degradation pathway and toxicity evaluation

Mixed-valence molybdenum oxide as a recyclable sorbent for silver removal and recovery from wastewater

Effective Removal of Thallium, Recovery, and Kinetic Research by MnO2@HKUST-1 for Wastewater

Advances in Sorptive Removal of Hexavalent Chromium (Cr(VI)) in Aqueous Solutions Using Polymeric Materials

Effective removal of thallium, recovery, and kinetic research by MnO 2 @HKUST-1 for wastewater

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water