Abstract:Ultrasonic imaging is one of the most important and still growing diagnostic tools today. Ultrasonic imaging is more appealing as a clinical imaging modality compared to such imaging modalities as magnetic resonance imaging (MRI), nuclear imaging, and x-ray computed tomography (CT) in that it is more cost-effective, non-invasive, capable of real-time operation, and portable while providing images of comparable quality and resolution. State-of-the-art ultrasonic scanners offer real-time gray scale images of anatomical detail with millimeter spatial resolution superimposed on which is a map of Doppler blood flow information displayed in color. Clinical applications of these devices are still expanding and the operating frequencies of these devices seem to inch higher and higher. High frequency (HF) ultrasound (>20 MHz) yields improved spatial resolution at the expense of a shallower depth of penetration. There are a number of clinical problems that may benefit from high frequency ultrasonic imaging. Intravascular imaging with probes mounted on catheter tips at frequencies higher than 20 MHz with the highest frequency being 60 MHz has been used to characterize atherosclerotic plaque and to guide stent placement and angioplastic procedures. The medical efficacy of ultrasonic imaging of anterior segments of the eye at frequencies higher than 50 MHz in diagnosing glaucoma and ocular tumors and in assisting refractive surgery has been demonstrated. Applications in dermatology for defining tumor involvement and for monitoring treatment, in vascular surgery for characterizing atherosclerotic plaques, and in small animal imaging are also being investigated. To further expand the role of HF ultrasound, probe performance must be improved since current HF ultrasound imaging devices, dubbed “ultrasound biomicroscopes” or “UBMs” by a number of investigators use mechanically scanned single element transducers. Compared to electronic scanning with linear arrays, mechanical scanning of a single element transducer has three major drawbacks: poorer resolution, slower frame rate, and motion of the probe. Single element transducers can only produce beams with a fixed focus which means the spatial resolution of the device is best only within the depth of focus, i.e., in a very tight zone and degrades rapidly beyond the focal point. Mechanical motion of the transducer limits the frame rate, is unreliable, and may cause discomfort and, at worst, hazard to the patient. My presentation will introduce several HF ultrasound transducers currently being developed by the NIH Transducer Resource Center at the University of California. Emphasis will be placed on the construction and implementation of high frequency array transducers. Learning Objectives: 1. Familiarize audience with high frequency ultrasound transducers and their applications.

An Acoustic Measurement Library for Non-Invasive Trans-Rodent Skull Ultrasonic Focusing at High Frequency

A High-Frequency Phased Array System for Transcranial Ultrasound Delivery in Small Animals

Site-specific characterization of transmission efficiency of broadband transcranial focused ultrasound

Acoustic Holographic Lenses for Transcranial Focusing in an Ex Vivo Human Skull

Feasibility of Ultrasonic Heating through Skull Phantom Using Single-element Transducer

Integrating a Fundus Camera with High-Frequency Ultrasound for Precise Ocular Lesion Assessment

Ultrasound Axicon: Systematic Approach to Optimize Focusing Resolution through Human Skull Bone

Multi-resolution simulation of focused ultrasound propagation through ovine skull from a single-element transducer

TU-D-210A-04: Development of High Frequency Ultrasound Transducers for Medical Imaging

Experimental demonstration of passive acoustic imaging in the human skull cavity using CT-based aberration corrections

Evaluation of ultrasound sensors for transcranial photoacoustic sensing and imaging

Acoustic Field Characterization of Medical Array Transducers Based on Unfocused Transmits and Single-Plane Hydrophone Measurements

Multifrequency transcranial ultrasound holography with acoustic lenses

An all-ultrasound cranial imaging method to establish the relationship between cranial FUS incidence angle and transcranial attenuation in non-human primates in 3D

Numerical Evaluation of the Influence of Skull Heterogeneity on Transcranial Ultrasonic Focusing

High resolution transcranial imaging based on the optoacoustic memory effect

Generating Patient-Specific Acoustic Simulations for Transcranial Focused Ultrasound Procedures Based on Optical Tracking Information

Ex vivo validation of non-invasive phase correction for transspine focused ultrasound: model performance and target feasibility

Comparison Between Ray-Tracing and Full-Wave Simulation for Transcranial Ultrasound Focusing on a Clinical System Using the Transfer Matrix Formalism

Ultra-High Frequency Self-Focusing Ultrasonic Sensors with Half-Concave Geometry for Visualization of Mouse Brain Atrophy

Holograms to focus arbitrary ultrasonic fields through the skull