Abstract:Adding lanes is a common method to increase the capacity at intersections. The additional turning lanes are often limited by the road configuration. The paper presents a probabilistic model to calculate the total capacity at signalized intersections for a full through lane and an additional left-turn lane. The proposed model has an advantage over current estimation methodologies by considering not only stochastic arrivals of vehicles but also the signal timing plan, especially signal phasing sequence. Two blockage situations under this channelization form arc taken into account. The proposed capacity model shows that the capacities of the through and left-turn movements are related to the proportion of the through traffic volume, the length of the additional turning lane, and the effective green time of both through and left-turn signal phases. It is also found that the through capacity increases with the increase of the proportion of the through traffic and the length of the additional lane, whereas the left-turn capacity declines with an increase of the proportion of the through traffic but increases with an increase of the length of the additional lane. Both capacities decrease with the increase of the green time when the g/C ratio is fixed. The proposed model is compared with design recommendations and verified using the microscopic traffic software VISSIM as well as field data. The results show that the capacities obtained by theoretical models are consistent with the simulated results, and have an advantage over the design recommendations. The capacity models can provide theoretical suggestions for the design of additional turning lanes and signal timing plans. (C) 2018 American Society of Civil Engineers.

Capacity Modeling and Control Optimization for a Two-Lane Highway Lane-Closure Work Zone

Integrated Control of Internal Boundary and Ramp Inflows for Lane-free Traffic of Automated Vehicles on Freeways.

Capacity of Urban Arterial Weaving Sections under Lane Signal Control Strategy

Freeway Traffic Control in Presence of Capacity Drop.

Simulation-based Optimization of Mixed Road Pricing Policies in a Large Real-world Network

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Simulation of the Frontage Road Control Near the Expressway Exit Ramp

Traffic Wave Models for the Urban Road with a Work Zone

Calibration and Validation of a Microsimulation Model of Lane Closures on a Two-Lane Highway Work Zone

Optimizing Work Zones for Two-Lane Urban Road Maintenance Projects

Bi-Level Programming Model for Dynamic Reversible Lane Assignment

Intersection control strategy optimization based on exchangeable lanes modeling

An Integrated Capacity Optimization Model Based on Two Unconventional Intersections

Modeling and Optimization of Toll Lane Selection for Connected and Automated Vehicles at Toll Plazas

On-ramp metering control strategy of urban expressway

An Improved Lane-Changing Rules for One-Way Two Lane Traffic with One Work Zone

A Signal Coordination Model for Long Arterials Considering Link Traffic Flow Characteristics

A platoon regulation algorithm to improve the traffic performance of highway work zones

Research on a Work Zone Model with Metering Zone under Mixed Traffic Flow Environment

A Cooperative Optimization Model for Variable Approach Lanes at Signaled Intersections Based on Real-Time Flow

Increasing the Capacity of Signalized Intersections by Allocating Exit Lanes to Turning Movements