Abstract:Conventional selective precipitation method has disadvantage in the low-efficiency filtration of fine precipitated particles during the treatment of waste solutions. To overcome this shortcoming, a stepwise precipitation flotation process was proposed to deeply separate Mo and Re from Mo-Re mixing waste solution with low concentrations in this work. Chelating agents are critical for the selective separation of Mo and Re. Experimental results show that the rhenate can be firstly separated from mixing solution by the synergistic effect of cetyl trimethyl ammonium bromide (CTAB) and dodecyl trimethyl ammonium bromide (DTAB). In the weak alkaline solutions with pH range of 6–10, CTAB shows a stronger competitive adsorption capacity with rhenate than molybdate through electrostatic interactions and coordination reactions. Meanwhile, DTAB has a great inhibition effect on the chelation of molybdate by CTAB in this pH range, which can further enhance the selective chelation of rhenate by CTAB. After Re separation, molybdate can be further recovered by CTAB from the residual solution with pH range of 3–5. In this pH range, Mo mainly exists in the form of isopolymolybdates acid, and molybdate shows a stronger competitive adsorption ability with CTAB than DTAB. Molybdate reacts with CTAB to form precipitate, and the fine precipitated particles are readily separated via flotation. The turbidity of the residual liquid after flotation is less than 5 NTU, meeting the wastewater discharge standard. In the Re precipitation flotation procedure, the comprehensive efficiencies of Re and Mo are 96.6% and 0.14% under the main conditions of temperature of 25°C, n(CTAB)/n(Re) molar ratio of 2:1, n(DTAB)/n(CTAB) molar ratio of 2:1, and pH of 6. In the further Mo flotation separation, Mo comprehensive recovery of 97.9% is achieved by using CTAB and KH 2 PO 4 as chelation agent and flocculant, respectively. The technological parameters of the conventional selective precipitation method and precipitation flotation method as well as the Mo and Re distributions in these two processes were compared in this study. Moreover, compared with the conventional selective precipitation method using inorganic precipitators, the precipitation flotation process shows a unique advantage in the easy purification of obtained products due to the utilization of organic agents.

Adsorption behaviors of strategic W/Mo/Re from wastewaters by novel magnetic ferrite nanoparticles: Adsorption mechanism underlying selective separation

Facile preparation of dual La-Zr modified magnetite adsorbents for efficient and selective phosphorus recovery

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Highly enhanced selectivity for the separation of rhenium and molybdenum using amino-functionalized magnetic Cu-ferrites

Removal of Rare Earth Elements from complex mixtures by using manganese ferrite nanoparticles: Optimization through surface response methodology

Selective Separation of Rare Earth Ions from Mine Wastewater Using Synthetic Hematite Nanoparticles from Natural Pyrite

Removal of rare earth elements by MnFe2O4 based mesoporous adsorbents: Synthesis, isotherms, kinetics, thermodynamics

Efficiently Selective Extraction of Iron (III) in an Aluminum‐based Metal‐organic Framework with Native N Adsorption Sites

Recycling of neodymium enhanced by functionalized magnetic ferrite

Plant extract mediated in-situ synthesis of iron/manganese alginate hydrosphere and its excellent recovery of rare earth elements in mine wastewater

What are the different biomolecules involved in the selective recovery of REEs from mining wastewater using FeNPs synthesized from two plant extracts?

As(V) adsorption by a novel core-shell magnetic nanoparticles prepared with Iron-containing water treatment residuals

Deep separation of critical metals of Mo and Re from waste solution by stepwise precipitation flotation: Selective chelation underlying separation mechanism

Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Novel magnetically separable anhydride-functionalized Fe3O4@SiO2@PEI-NTDA nanoparticles as effective adsorbents: synthesis, stability and recyclable adsorption performance for heavy metal ions

Efficient and selective removal of Pb(ii) from aqueous solution by a thioether-functionalized lignin-based magnetic adsorbent

Novel nitrogen-rich hydrogel adsorbent for selective extraction of rare earth elements from wastewater

Mechanistic insights into the adsorption and extraction of rare earth ions using oxygen- and phosphorus-doped porous graphitic carbon nitride

Synthesis of MnFe2O4@Mn-Co oxide core-shell nanoparticles and their excellent performance for heavy metal removal.

Crosslinked Polydiallyldimethylammonium Chloride Adsorbent for the Selective Separation of Rhenium Ions from Pregnant Leach Solutions

Fabricating magnetic thermo-sensitive imprinted polymers with enhanced adsorption and recognition performance of rhenium