Abstract:This study aims to develop cost-effective and efficient dye-sensitized solar cells (DSSCs) by synthesizing a novel NiMoO4/g-C3N4 hybrid composite material using a straightforward ultrasonic-assisted hydrothermal method. The investigation of optical properties through UV-visible absorption spectroscopy revealed distinct band gap energies of 2.65 eV for NMO-GN0, 2.50 eV for NMO-GN5, 2.42 eV for NMO-GN7, and 2.30 eV for NMO-GN10, underscoring the tunable nature of the synthesized materials. The research extended to the evaluation of power conversion efficiency (PCE) in DSSCs employing NMO-GN as photoanode materials. Remarkably, the PCE exhibited significant sensitivity to the concentration of graphitic carbon nitride in NiMoO4. In detail, the manufactured DSSCs demonstrated an impressive PCE of 8.21% for NiMoO4/GN, notably outperforming bare NiMoO4 with a PCE of 2.75%. This enhancement is attributed to the reduction in electron recombination, improved incident photon-to-current conversion yield due to expedited charge collection, and enhanced dye sensitization. Furthermore, the synergistic effect between NiMoO4 and the graphene-based material offered an extensive active pathway, facilitated by their substantial surface area (104.8 m2/g) and sizable pore size (38.82 nm). The enhancement in the photoelectric conversion properties of NiMoO4/g-C3N4 primarily stems from the increased porosity and textural changes within the photoelectrodes induced by graphene incorporation. A detailed mechanism for this improved efficiency was discussed, incorporating insights from electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), providing a comprehensive understanding of the enhanced performance achieved in these advanced DSSCs. This work presents a promising approach to address the challenges of cost-efficiency and improved performance in DSSCs, contributing to the advancement of sustainable solar energy technologies.

Bio-cellulose-derived rGO-supported SmCoO3 hybrid composite photoanode for high performance dye-sensitized solar cells

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Tuning the Properties of Reduced Graphene Oxide-Sr0.7Sm0.3Fe0.4Co0.6O3 Nanocomposites as Potential Photoanodes for Dye-Sensitized Solar Cells

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Perovskite zinc titanate-reduced graphene oxide nanocomposite photoanode for improved photovoltaic performance in dye-sensitized solar cell

Designing of $$\hbox {tio}_{2}$$–rgo Nanocomposite-Based Photoanode to Enhance the Performance of Dye-Sensitized Solar Cells

Improved DSSC photovoltaic performance using reduced graphene oxide–carbon nanotube/platinum assisted with customised triple-tail surfactant as counter electrode and zinc oxide nanowire/titanium dioxide nanoparticle bilayer nanocomposite as photoanode

Reduced Graphene Oxide-Ta3n5 Composite: A Potential Cathode For Efficient Co(Bpy)(3)(3+/2+) Mediated Dye-Sensitized Solar Cells

Designing of $$\hbox {TiO}_{2}$$ TiO 2 –rGO nanocomposite-based photoanode to enhance the performance of dye-sensitized solar cells

Constructions of NiCo2S4@rGO composite for use as a low-cost counter electrode material in dye-sensitised solar cells

Reduced Graphene Oxide–ta3n5 Composite: a Potential Cathode for Efficient Co(bpy)33+/2+ Mediated Dye-Sensitized Solar Cells

Thin layer of nano nomposite RGO COMOS as a counter electrode on Dye Sensitized Solar Cell (DSSC)

Optimized Photoelectric Catalysis with Enhanced Durability in Rgo-Interconnected Nanaocarbon-Confined Cobalt Nanoparticles

Barium titanate nanorods-nanoparticles embedded reduced graphene oxide nanocomposite photoanode for dye-sensitized solar cell

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite material via the incorporated hydrothermal co-precipitation method for fabricating photoanode in dye-sensitized solar cell

Synergistic Incorporation of 2D Graphitic Carbon Nitride into Bimetal Oxide Photoanodes Towards Higher-Performance DSSCs

Improved Performance of DSSC Photoanodes After the Modification of TiO2 with Reduced Graphene Oxide

Optimization of Preparation Conditions by Response Surface Methodology for Synthesis of Titanium Dioxide/Reduced Graphene Oxide Composite in Dye-Sensitized Solar Cells

CuNi2S4-reduced graphene oxide composites as an efficient counter electrode for high performance dye-sensitized solar cells

Studies on synergetic effect of CuCo2S4/rGO as an efficient Pt-free triiodide reducing agent for dye-sensitized solar cell application

Nanocomposite of Co-NiS/GO as a Versatile Catalyst: Enabling Platinum-Free DSSC Counter Electrodes and Enhancing Organic Dye Degradation