Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Amine-enriched Ti/SiO x framework fabricated via one-step photochemical synthesis for carbon dioxide adsorption and separation applications

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Tailoring Amine-Functionalized Ti-MOFs via a Mixed Ligands Strategy for High-Efficiency CO2 Capture

Facilely Incorporating Aliphatic Amines into a Hydroxyl-Containing Robust Metal-Organic Framework for Enhancing CO2 Adsorption

Two-dimensional interfacial enhanced CO2 adsorption performance of porous organic amine solids: Structure-activity relationships and DFT calculations

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Efficient and stable CO2 capture using a scalable and spontaneous cross-linking amine-functionalized nano-Al2O3 adsorbent

Synthesis of Porous Organic Polymers with Tunable Amine Loadings for CO2 Capture: Balanced Physisorption and Chemisorption

Modulator-Directed Counterintuitive Catenation Control for Crafting Highly Porous and Robust Metal-Organic Frameworks with Record High SO2 Uptake Capacity.

A Series of Metal–Organic Frameworks Built of Triazolate-Trinuclear and Paddlewheel Units: Solid-Solution Framework Approach for Optimizing CO2 Adsorption and Separation

One-pot synthesis of the amine-modified meso-structured monolith CO2 adsorbent

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

Robust “dry amine” solid CO2 sorbent synthesized by a facile, cost-effective and environmental friendly pathway

Increased CO 2 capture capacity via amino-bifunctionalized halloysite nanotubes adsorbents

Synergistic dual-Li+ sites for CO2 separation in metal-organic framework composites

A sulfonate-functionalized covalent organic framework for record-high adsorption and effective separation of organic dyes

Highly Efficient I 2 Sorption, CO 2 Capture, and Catalytic Conversion by Introducing Nitrogen Donor Sites in a Microporous Co(II)-Based Metal–Organic Framework

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Highly Enhanced Gas Uptake and Selectivity Via Incorporating Methoxy Groups into a Microporous Metal–Organic Framework

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group