Abstract:In this paper, we propose a novel tactile sensor with a "fingerprint" design, named due to its spiral shape and dimensions of 3.80 mm × 3.80 mm. The sensor is duplicated in a four-by-four array containing 16 tactile sensors to form a "SkinCell" pad of approximately 45 mm by 29 mm. The SkinCell was fabricated using a custom-built microfabrication platform called the NeXus which contains additive deposition tools and several robotic systems. We used the NeXus' six-degrees-of-freedom robotic platform with two different inkjet printers to deposit a conductive silver ink sensor electrode as well as the organic piezoresistive polymer PEDOT:PSS-Poly (3,4-ethylene dioxythiophene)-poly(styrene sulfonate) of our tactile sensor. Printing deposition profiles of 100-micron- and 250-micron-thick layers were measured using microscopy. The resulting structure was sintered in an oven and laminated. The lamination consisted of two different sensor sheets placed back-to-back to create a half-Wheatstone-bridge configuration, doubling the sensitivity and accomplishing temperature compensation. The resulting sensor array was then sandwiched between two layers of silicone elastomer that had protrusions and inner cavities to concentrate stresses and strains and increase the detection resolution. Furthermore, the tactile sensor was characterized under static and dynamic force loading. Over 180,000 cycles of indentation were conducted to establish its durability and repeatability. The results demonstrate that the SkinCell has an average spatial resolution of 0.827 mm, an average sensitivity of 0.328 mΩ/Ω/N, expressed as the change in resistance per force in Newtons, an average sensitivity of 1.795 µV/N at a loading pressure of 2.365 PSI, and a dynamic response time constant of 63 ms which make it suitable for both large area skins and fingertip human-robot interaction applications.

Bioinspired Passive Tactile Sensors Enabled by Reversible Polarization of Conjugated Polymers

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

Rational design of bioinspired gradient conductivity and stiffness for tactile sensors with high sensitivity and large linear range

Flexible and Stretchable Electrically Conductive Polymer Materials for Physical Sensing Applications

Bio-inspired Tactile Sensor with Arrayed Structures Based on Electroactive Polymers

Bioinspired Flexible Hydrogelation with Programmable Properties for Tactile Sensing (Adv. Mater. 29/2024)

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

Transient piezoresistive sensors based on tolerable, safe, and semiconductive polypyrrole/vermiculite/alginate frameworks

Self‐Healable and Recyclable Tactile Force Sensors with Post‐Tunable Sensitivity

Design and Fabrication of Tactile Sensors Based on Electroactive Polymer Composites

A Self‐Conformable Smart Skin with Sensing and Variable Stiffness Functions

Tuning the sensing range and sensitivity of three axes tactile sensors using the polymer composite membrane

Design, Fabrication, and Characterization of Inkjet-Printed Organic Piezoresistive Tactile Sensor on Flexible Substrate

Active Learning-Aided Design of a Flexible Tactile Sensor Array for Recognizing Properties of Deformable Objects

Anisotropic Shear-Sensitive Tactile Sensors with Programmable Elastomers for Robotic Manipulations

Perception of Static and Dynamic Forces with a Bio-inspired Tactile Fingertip

Energy-efficient, fully flexible, high-performance tactile sensor based on piezotronic effect: Piezoelectric signal amplified with organic field-effect transistors

3-Axes Tactile Sensor with Tunable Sensing Range

Contact Piezoresistive Sensors Based on Electro-Polymerized Polypyrrole and a Regulated Conductive Pathway

A biomimetic tactile sensing system based on polyvinylidene fluoride film

A selectively bimodal flexible sensor based on IL/SWCNTs/PEDOT:PSS nanocomposites for materials and shape recognition