Experimental Study on the Dynamic Mechanical Properties and Critical Crushing Energy Dissipation Characteristics of Rocks Under Three-Dimensional Dynamic–Static Combinations of Loading Scenarios

Xingchao Tian,Tiejun Tao,Caijin Xie
DOI: https://doi.org/10.1007/s40999-024-00996-9
IF: 2.184
2024-06-12
International Journal of Civil Engineering
Abstract:To investigate the mechanical and energy dissipation characteristics of gray sandstone at critical failure, dynamic impact compression tests were conducted under different axial pressure and confining pressure levels. The critical energy dissipation density of gray sandstone under different dynamic-static combination loading conditions was determined, and an empirical model for predicting the critical energy dissipation density was established. The conclusions of the current research are: (1) the dynamic peak stress increases and then decreases with increasing axial pressure and increases with increasing confining pressure. The axial pressure turning points of dynamic peak stress from strong to poor under 4 MPa, 8 MPa, and 12 MPa confining pressure conditions were 22.54 MPa, 22.05 MPa, and 23.64 MPa, respectively. (2) The second type of cut line modulus increases and then decreases with the increase of axial pressure, showing a quadratic law of change. (3) When there is no axial pressure, the critical energy dissipation density increases and then decreases with the increase of confining pressure, showing an exponential function change rule. Under the condition of axial pressure, the critical energy dissipation density increases with the increase of confining pressure, showing the change rule of logarithmic function, and increases with the increase of axial pressure and then decreases, showing the change rule of quadratic function. (4) Under the conditions of confining pressure of 4 MPa, 8 MPa, 12 MPa, and axial pressure of 25.00 MPa, 28.33 MPa, and 20.00 MPa, the critical dissipation densities reached the maximum values of 7.01 J cm −3 , 7.38 J cm −3 , and 8.40 J cm −3 , respectively. The empirical model can better predict the critical absorbed energy density of gray sandstone under different dynamic and static combinations loading conditions.
engineering, civil
What problem does this paper attempt to address?