Electrochemical CO 2 reduction to methane with remarkably high Faradaic efficiency in the presence of a proton permeable membrane

Hanqing Pan,Christopher J. Barile

DOI: https://doi.org/10.1039/d0ee02189j

2020-01-01

Abstract:Cu electrodes modified with a Nafion layer catalyze the reduction of CO 2 to CH 4 with up to 88% Faradaic efficiency.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences

What problem does this paper attempt to address?

Highly Selective Electrochemical Reduction of CO 2 into Methane on Nanotwinned Cu

Jin Cai,Qing Zhao,Wei-You Hsu,Chungseok Choi,Yang Liu,Chih Chen,Jin Huang,Yu Huang,John Mark P Martirez,Emily A Carter

DOI: https://doi.org/10.1021/jacs.3c00847

IF: 15

2023-04-19

Journal of the American Chemical Society

Abstract:The electrochemical carbon dioxide reduction reaction (CO(2)RR) is a promising route to close the carbon cycle by reducing CO(2) into valuable fuels and chemicals. Electrocatalysts with high selectivity toward a single product are economically desirable yet challenging to achieve. Herein, we demonstrated a highly (111)-oriented Cu foil electrocatalyst with dense twin boundaries (TB) (tw-Cu) that showed a high Faradaic efficiency of 86.1 ± 5.3% toward CH(4) at -1.2 ± 0.02 V vs the reversible...

chemistry, multidisciplinary
Progress of CO2 Electrochemical Methanation Using a Membrane Electrode Assembly

Shofu Matsuda,Masatoshi Osawa,Minoru Umeda

DOI: https://doi.org/10.1007/s12678-024-00873-y

2024-05-26

Electrocatalysis

Abstract:CO 2 reduction and fixation are one of the most interesting topics in the fields of environmental electrochemistry and electrocatalysis. Many studies on CO 2 electroreduction using various metal electrodes have been reported. However, this reaction requires a high overpotential in general, which lowers the energy conversion efficiency and prevents its practical applications to reduce CO 2 emission to the atmosphere. The use of a membrane electrode assembly (MEA) is expected to be a breakthrough for the CO 2 electroreduction. Particularly, methanation (converting CO 2 into CH 4 ) with MEAs incorporating Cu-based catalysts attracts special attention as a tool for carbon cycling, thanks to high faradaic efficiencies and relatively high energy conversion efficiencies. Different from Cu, Pt has long been recognized as an inactive catalyst for CO 2 reduction. Contrary to the common consensus, MEAs incorporating a Pt-based electrocatalyst were found very recently to be as active as Cu-based catalysts toward methanation under specific reaction conditions. The high activity of Pt arises from a reaction mechanism different from that for Cu; most likely the Langmuir–Hinshelwood mechanism for Pt and the Eley–Rideal mechanism for Cu. This mini-review discusses CO 2 electrochemical methanation using MEAs as a potential method for carbon capture. The CO 2 reduction to CH 4 using a H 2 -CO 2 fuel cell is also presented.

chemistry, physical,electrochemistry
Self-supporting BiCu/carbon hybrid nanofiber membrane promotes efficient CO2 electroreduction to formate

Dewen Song,Shipeng Zhang,Hui Ning,Xiang Fei,Mingwang Wang,Xiaoshan Wang,Wenting Wu,Qingshan Zhao,Yongzhe Li,Mingbo Wu

DOI: https://doi.org/10.1007/s40843-023-2742-9

2024-02-09

Science China Materials

Abstract:CO 2 electroreduction is an alluring technology for high-value CO 2 utilization and intermittent electrical energy storage. Self-supporting catalysts with high efficiency have clear advantages over powder ones in electrode construction but still lack effective synthesis methods. In this work, a self-supporting BiCu/carbon hybrid nanofiber membrane (BiCu/CHNM) was synthesized by electrospinning-calcination and employed directly as a working electrode in a flow cell for CO 2 electroreduction to formate with a high Faradaic efficiency of 87.67% at a partial current density of 142.9 mA cm −2 . In stability tests, the Faradaic efficiency of formate remained at 80% for 50 h at high partial current densities (>100 mA cm −2 ). In-situ Raman spectra and density functional theory calculations confirmed that copper doping lowers the energy barrier of HCOO − formation on the Bi (012) plane and increases the conductivity of the carbon nanofiber network. Due to the well-designed conductive framework and the highly dispersed BiCu active sites, this hybrid membrane shows high activity, high selectivity, and long stability simultaneously.

materials science, multidisciplinary
MOF Encapsulating N-Heterocyclic Carbene-Ligated Copper Single-Atom Site Catalyst towards Efficient Methane Electrosynthesis

Shenghua Chen,Wen-Hao Li,Wenjun Jiang,Jiarui Yang,Jiexin Zhu,Liqiang Wang,Honghui Ou,Zechao Zhuang,Mingzhao Chen,Xiaohui Sun,Dingsheng Wang,Yadong Li

DOI: https://doi.org/10.1002/anie.202114450

2022-01-01

Abstract:The exploitation of highly efficient carbon dioxide reduction (CO2RR) electrocatalyst for methane (CH4) electrosynthesis has attracted great attention for the intermittent renewable electricity storage but remains challenging. Here, N-heterocyclic carbene (NHC)-ligated copper single atom site (Cu SAS) embedded in metal-organic framework is reported (2Bn-Cu@UiO-67), which can achieve an outstanding Faradaic efficiency (FE) of 81 % for the CO2 reduction to CH4 at -1.5 V vs. RHE with a current density of 420 mA cm(-2). The CH4 FE of our catalyst remains above 70 % within a wide potential range and achieves an unprecedented turnover frequency (TOF) of 16.3 s(-1). The sigma donation of NHC enriches the surface electron density of Cu SAS and promotes the preferential adsorption of CHO* intermediates. The porosity of the catalyst facilitates the diffusion of CO2 to 2Bn-Cu, significantly increasing the availability of each catalytic center.
Electrochemical reduction of carbon dioxide with nearly 100% carbon monoxide faradaic efficiency from vacancy-stabilized single-atom active sites

Chenbao Lu,Kaiyue Jiang,Diana Tranca,Ning Wang,Hui Zhu,Fermín Rodríguez-Hernández,Zhenying Chen,Chongqing Yang,Fan Zhang,Yuezeng Su,Changchun Ke,Jichao Zhang,Yu Han,Xiaodong Zhuang

DOI: https://doi.org/10.1039/d1ta05990d

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Unsaturated Ni centers are prepared through a CO 2 -to-carbon process and exhibit promising performance for electrochemical CO 2 reduction. As cathodes in flow cells, the catalysts exhibit nearly 100% selectivity for CO formation under a high current density of 51 mA cm −2 .

materials science, multidisciplinary,chemistry, physical,energy & fuels
Boosting Electrochemical CO2 Reduction to CO by Regulating the Porous Structure of Carbon Membrane

Hongyuan Chuai,Haibei Yang,Sheng Zhang

DOI: https://doi.org/10.1021/acsami.4c04318

2024-05-15

Abstract:Ni single-atom-decorated nitrogen-doped carbon materials (Ni-Nx-C) have demonstrated high efficiency in the electrochemical reduction of CO2 (CO2RR) to CO. In this study, Ni-Nx-C active sites were embedded within a carbon membrane via an electrospinning and pyrolysis process. The resulting self-supported carbon membrane hosting Ni-Nx-C sites could be directly utilized as an electrode for the CO2RR. To enhance the CO2RR performance of the carbon membrane, the porous structure of the carbon membrane was fine-tuned by incorporating a pore-forming agent. The optimized porous carbon membrane electrode, K0.66-Ni-NC, achieved an impressive CO faradaic efficiency (FECO) of over 90% within a wide potential range from -0.8 to -1.6 V vs RHE for CO2RR. Additionally, it maintained an FECO of above 90% at -0.8 V vs RHE throughout a 30 h durability test in an H-cell. Further analysis has revealed that the porous structure of the carbon membrane not only facilitates the mass transport of CO2 but also increases the level of exposure of active sites during the CO2RR.
Highly Selective Electrochemical Reduction of CO2 into Methane on Nanotwinned Cu.

Jin Cai,Qing Zhao,Wei-You Hsu,Chungseok Choi,Yang Liu,John Mark P. Martirez,Chih Chen,Jin Huang,Emily A. Carter,Yu Huang

DOI: https://doi.org/10.1021/jacs.3c00847

IF: 15

2023-01-01

Journal of the American Chemical Society

Abstract:The electrochemical carbon dioxide reduction reaction (CO2RR) is a promising route to close the carbon cycle by reducing CO2 into valuable fuels and chemicals. Electrocatalysts with high selectivity toward a single product are economically desirable yet challenging to achieve. Herein, we demonstrated a highly (111)-oriented Cu foil electrocatalyst with dense twin boundaries (TB) (tw-Cu) that showed a high Faradaic efficiency of 86.1 +/- 5.3% toward CH4 at -1.2 +/- 0.02 V vs the reversible hydrogen electrode. Theoretical studies suggested that tw-Cu can significantly lower the reduction barrier for the rate-determining hydrogenation of CO compared to planar Cu(111) under working conditions, which suppressed the competing C-C coupling, leading to the experimentally observed high CH4 selectivity.
Electrochemical Reduction of Gaseous CO2 with a Catechol and Polyethyleneimine Co-Deposited Polypropylene Membrane

Zheng Xia,Wenze Qiu,Han Bao,Bin Yang,Lecheng Lei,Zhikang Xu,Zhongjian Li

DOI: https://doi.org/10.1016/j.elecom.2016.07.009

IF: 5.443

2016-01-01

Electrochemistry Communications

Abstract:A novel solid polymer electrolyte was developed by co-deposition of catechol (CCh) and polyethyleneimine (PEI) on a polypropylene membrane for electrochemical reduction of CO2 (ERC) in gas phase. ERC performance was both investigated in a gas-gas mode and a gas-liquid mode. The maximum CO production rate was 121μmol/h and the faradaic efficiency was 51% in the gas-liquid mode, which were much higher than those obtained with AM-7001 under the same condition. The high loading rate of quaternary ammonium ions on the membrane and the large surface area provided by the porous nano-structure of the membrane contribute to the high ERC efficiency. Furthermore, the cost of the CCh/PEI-Q membrane was much lower than commercial Nafion membranes, endowing this novel composite SPE with great potential in industrial application.
Nitrided copper-iron composite oxides derived from layered double hydroxides for enhanced carbon dioxide electroreduction to methane and formic acid

Dian Song,Jinqing He,Yiping Wang,Xuhui Zhao,Fazhi Zhang,Xiaodong Lei

DOI: https://doi.org/10.59400/esc.v2i2.369

2024-05-08

Abstract:The reduction of carbon dioxide into valuable chemical products is a promising solution to address carbon balance and energy issues. Herein, amorphous nitrided copper-iron oxides are prepared by gas-phase nitriding of CuFe-layered double hydroxide precursors with urea as a nitrogen source. The obtained materials show high activity for CO2 electroreduction to methane and formic acid, achieving a total Faraday efficiency of 74.7% at −0.7 V vs. RHE and exhibiting continuous 10 h durability in the H-cell. The uniformly distributed Cu+ sites act as active sites by losing electrons to activate CO2. During the CO2 electroreduction, CO2 is converted to *COOH via proton-electron coupling; *COOH combines directly with a proton in solution to produce the HCOOH product; and the other part of *COOH undergoes a protonated dehydration process to form the *CHO intermediate, which dehydrates again to form CH4. This study provides a new approach for designing CO2 electroreduction catalysts.
Low coordination number copper catalysts for electrochemical CO2 methanation in a membrane electrode assembly

Yi Xu,Fengwang Li,Aoni Xu,Jonathan P. Edwards,Sung-Fu Hung,Christine M. Gabardo,Colin P. O’Brien,Shijie Liu,Xue Wang,Yuhang Li,Joshua Wicks,Rui Kai Miao,Yuan Liu,Jun Li,Jianan Erick Huang,Jehad Abed,Yuhang Wang,Edward H. Sargent,David Sinton

DOI: https://doi.org/10.1038/s41467-021-23065-4

IF: 16.6

2021-05-18

Nature Communications

Abstract:Abstract The electrochemical conversion of CO 2 to methane provides a means to store intermittent renewable electricity in the form of a carbon-neutral hydrocarbon fuel that benefits from an established global distribution network. The stability and selectivity of reported approaches reside below technoeconomic-related requirements. Membrane electrode assembly-based reactors offer a known path to stability; however, highly alkaline conditions on the cathode favour C-C coupling and multi-carbon products. In computational studies herein, we find that copper in a low coordination number favours methane even under highly alkaline conditions. Experimentally, we develop a carbon nanoparticle moderator strategy that confines a copper-complex catalyst when employed in a membrane electrode assembly. In-situ XAS measurements confirm that increased carbon nanoparticle loadings can reduce the metallic copper coordination number. At a copper coordination number of 4.2 we demonstrate a CO 2 -to-methane selectivity of 62%, a methane partial current density of 136 mA cm −2 , and > 110 hours of stable operation.

multidisciplinary sciences
Efficient Electrocatalytic Reduction of CO2 by Nitrogen-Doped Nanoporous Carbon-Carbon Nanotube Membranes - A Step Towards the Electrochemical CO2 Refinery

Hong Wang,Jia Jia,Pengfei Song,Qiang Wang,Debao Li,Shixiong Min,Chenxi Qian,Lu Wang,Young Feng Li,Chun Ma,Tom Wu,Jiayin Yuan,Markus Antonietti,Geoffrey A. Ozin

DOI: https://doi.org/10.48550/arXiv.1905.01466

IF: 2.552

2019-05-04

Chemical Physics

Abstract:The search for earth abundant, efficient and stable electrocatalysts that can enable the chemical reduction of CO2 to value-added chemicals and fuels at an industrially relevant scale, is a high priority for the development of a global network of renewable energy conversion and storage systems that can meaningfully impact greenhouse gas induced climate change. Here we introduce a straightforward, low cost, scalable and technologically relevant method to manufacture an all-carbon, electroactive, nitrogen-doped nanoporous carbon-carbon nanotube composite membrane, dubbed "HNCM-CNT". The membrane is demonstrated to function as a binder-free, high-performance electrode for the electrocatalytic reduction of CO2 to formate. The Faradaic efficiency for the production of formate is 81%. Furthermore, the robust structural and electrochemical properties of the membrane endow it with excellent long-term stability.
High-rate and selective conversion of CO2 from aqueous solutions to hydrocarbons

Cornelius A. Obasanjo,Guorui Gao,Jackson Crane,Viktoria Golovanova,F. Pelayo García de Arquer,Cao-Thang Dinh

DOI: https://doi.org/10.1038/s41467-023-38963-y

IF: 16.6

2023-06-01

Nature Communications

Abstract:Abstract Electrochemical carbon dioxide (CO 2 ) conversion to hydrocarbon fuels, such as methane (CH 4 ), offers a promising solution for the long-term and large-scale storage of renewable electricity. To enable this technology, CO 2 -to-CH 4 conversion must achieve high selectivity and energy efficiency at high currents. Here, we report an electrochemical conversion system that features proton-bicarbonate-CO 2 mass transport management coupled with an in-situ copper (Cu) activation strategy to achieve high CH 4 selectivity at high currents. We find that open matrix Cu electrodes sustain sufficient local CO 2 concentration by combining both dissolved CO 2 and in-situ generated CO 2 from the bicarbonate. In-situ Cu activation through alternating current operation renders and maintains the catalyst highly selective towards CH 4 . The combination of these strategies leads to CH 4 Faradaic efficiencies of over 70% in a wide current density range (100 – 750 mA cm -2 ) that is stable for at least 12 h at a current density of 500 mA cm -2 . The system also delivers a CH 4 concentration of 23.5% in the gas product stream.

multidisciplinary sciences
Selective CO2 electroreduction to multicarbon products exceeding 2 A cm−2 in strong acids via a hollow-fiber Cu penetration electrode

Chang Zhu,Gangfeng Wu,Aohui Chen,Guanghui Feng,Xiao Dong,Guihua Li,Shoujie Li,Yanfang Song,Wei Wei,Wei Chen

DOI: https://doi.org/10.1039/d3ee02867d

IF: 32.5

2023-12-22

Energy & Environmental Science

Abstract:CO 2 electroreduction in acidic media is highly attractive to avoid carbonation loss, but remains a challenge for selective reduction of CO 2 due to overwhelming hydrogen evolution reaction (HER) in a proton-rich environment. Herein, we report a hollow-fiber Cu penetration electrode that can effectively inhibit the HER while promoting CO 2 reduction kinetics and even C–C coupling to form multicarbon (C 2+ ) products in strong acids. A faradaic efficiency of 73.4%, a partial current density of 2.2 A cm −2 , and a single pass carbon efficiency of 51.8% were achieved for C 2+ production, sustaining 100 h electrolysis in a pH = 0.71 solution of H 2 SO 4 and KCl. Sufficient CO 2 feeding induced by the hollow-fiber penetration configuration greatly improved CO 2 coverage on Cu active sites in strong acids, favoring CO 2 activation, *CHO and *CO formation, and their couplings to C 2+ products.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Pressure-Dependent CO 2 Electroreduction to Methane over Asymmetric Cu-N 2 Single-Atom Sites

Haoyang Wu,Benqiang Tian,Wenhai Xu,Kovan K. Abdalla,Yun Kuang,Jiazhan Li,Xiaoming Sun

DOI: https://doi.org/10.1021/jacs.4c04031

IF: 15

2024-07-14

Journal of the American Chemical Society

Abstract:Single-atom catalysts (SACs) with unitary active sites hold great promise for realizing high selectivity toward a single product in the CO(2) electroreduction reaction (CO(2)RR). However, achieving high Faradaic efficiency (FE) of multielectron products like methane on SACs is still challenging. Herein, we report a pressure-regulating strategy that achieves 83.5 ± 4% FE for the CO(2)-to-CH(4) conversion on the asymmetric Cu-N(2) sites, representing one of the best CO(2)-to-CH(4) performances....

chemistry, multidisciplinary
Enhancing CO2 electroreduction to CH4 over Cu nanoparticles supported on N-doped carbon

B. Han,Ruizhi Wu,Xupeng Yan,Xue-qing Xing,Zhonghua Wu,Jianling Zhang,Chunjun Chen,Shoujie Liu,Zhimin Liu,Jun Ma,Yahui Wu

DOI: https://doi.org/10.1039/d2sc02222b

IF: 8.4

2022-07-05

Chemical Science

Abstract:The electroreduction of CO2 to CH4 has attracted extensive attention. However, it is still a challenge to achieve high current density and faradaic efficiency (FE) for producing CH4 because the reaction involves eight electrons and four protons. In this work, we designed Cu nanoparticles supported on N-doped carbon (Cu-np/NC). It was found that the catalyst exhibited outstanding performance for the electroreduction of CO2 to CH4. The FE toward CH4 could be as high as 73.4% with a high current density of 320 mA cm−2. In addition, the mass activity could reach up to 6.4 A mgCu−1. Both experimental and theoretical calculations illustrated that the pyrrolic N in NC could accelerate the hydrogenation of *CO to the *CHO intermediate, resulting in high current density and excellent selectivity for CH4. This work conducted the first exploration of the effect of N-doped species in composites on the electrocatalytic performance of CO2 reduction.

Environmental Science,Chemistry,Medicine,Materials Science
Efficient electrocatalytic CO2 reduction to C2+ chemicals on internal porous copper

Sha Wang,Jianling Zhang,Lei Yao,Yisen Yang,Lirong Zheng,Bo Guan,Yingzhe Zhao,Yanyue Wang,Buxing Han,Xueqing Xing

DOI: https://doi.org/10.1007/s12274-023-5791-y

IF: 9.9

2023-06-19

Nano Research

Abstract:To improve the electrocatalytic conversion of carbon dioxide (CO 2 ) into C 2+ products (such as ethylene (C 2 H 4 ) and ethanol (CH 3 CH 2 OH), etc.) is of great importance, but remains challenging. Herein, we proposed a strategy that directs the C-C coupling pathway through enriching and confining the carbon monoxide (CO) intermediate to internal pores of Cu nanocubes, for electrocatalytic reduction of CO 2 into C 2+ chemicals. In H-type cell, the Faraday efficiency (FE) for ethylene and ethanol reaches 70.3% at −1.28 V versus the reversible hydrogen electrode (vs. RHE), with a current density of 47.9 mA·cm −2 . In flow cell, the total current density is up to 340.3 mA·cm −2 at −2.38 V (vs. RHE) and the FE for C 2+ products is 67.4%. Experimental and theoretical studies reveal that both the CO intermediate adsorption and C-C coupling reaction on such an internal porous catalyst are facilitated, thus improving CO 2 -to-C 2+ conversion efficiency.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Halide-modulated Hollow-Fiber Cu penetration electrode boosts Ampere-Level CO 2 electroreduction to multicarbon products

Chang Zhu,Gangfeng Wu,Jianing Mao,Aohui Chen,Yonghui Zhao,Guanghui Feng,Yiheng Wei,Xiaohu Liu,Shoujie Li,Guihua Li,Xiao Dong,Yanfang Song,Wei Wei,Wei Chen

DOI: https://doi.org/10.1016/j.cej.2024.150040

IF: 15.1

2024-03-02

Chemical Engineering Journal

Abstract:Electroreduction of CO 2 to chemical fuels is desirable for the economically viable use of CO 2 and consumption of renewable electricity. Efficient production of C 2+ on Cu-based catalysts remains a challenge. Herein, a copper hollow fiber penetration electrode with a striking C–C coupling capability by virtue of modulating the electronic states through halide ion coordinated adsorption. An efficient C 2+ production with a FE of 68.8 % at 2.1 A cm −2 in 3.0 M KI and remained stable during 120-h electrolysis at 2.0 A cm −2 , outperforming reported catalytic performance, which is the result of combined effect of penetration effect and halide ion coordinated adsorption, which promotes the transfer of electrons to CO 2 , reduces the C–C coupling energy and suppresses proton adsorption, thereby reducing hydrogen evolution.

engineering, chemical, environmental
Selective electrochemical methanation of carbon dioxide using a sulphide derived CuZn catalyst

Venkata Sai Sriram Mosali,Graeme Puxty,Michael D. Horne,Alan M. Bond,Jie Zhang

DOI: https://doi.org/10.1016/j.electacta.2023.143628

IF: 6.6

2023-12-04

Electrochimica Acta

Abstract:Efficient catalysts facilitate the electrochemical reduction of CO 2 , enabling its conversion into fuels or chemical feedstocks through proton coupled electron transfer processes. Among these catalysts, Cu-based ones stand out for their unique ability to produce hydrocarbon products with high faradaic efficiencies. This study focuses on the use of sulphide-derived (SD)-Cu x Zn y nanoparticle catalysts, which have been found to exhibit enhanced methane selectivity during CO 2 reduction in an H-Cell with 0.10 M KHCO 3 as the electrolyte. The composition of the catalysts plays a crucial role in determining their catalytic behaviour. At an optimal Cu/Zn ratio of 1:1, the SD-CuZn catalyst demonstrates exceptional methane production, achieving a faradaic efficiency of 76 ± 3% at a potential of -0.98 V vs RHE. Moreover, a partial current density of -4.5 mA cm −2 was achieved at a more negative potential of -1.09 V vs RHE. Ex situ characterization highlighted the significance of partially reduced CuS species in influencing the selectivity of hydrogenated carbon products. When CO 2 reduction was performed in a flow cell equipped with a gas diffusion electrode with 1.0 M KHCO 3 or 1.0 M KOH electrolytes in both anodic and cathodic compartments, the current density increased due to the enhanced mass transport rate. However, the altered conditions lead to a shift in selectivity, favoring carbon monoxide over methane. It is important to note that insights garnered from H-cell experiments may not be directly extrapolated to flow cell setups.

electrochemistry
A scalable membrane electrode assembly architecture for efficient electrochemical conversion of CO2 to formic acid

Leiming Hu,Jacob A Wrubel,Carlos M Baez-Cotto,Fry Intia,Jae Hyung Park,Arthur Jeremy Kropf,Nancy Kariuki,Zhe Huang,Ahmed Farghaly,Lynda Amichi,Prantik Saha,Ling Tao,David A Cullen,Deborah J Myers,Magali S Ferrandon,K C Neyerlin

DOI: https://doi.org/10.1038/s41467-023-43409-6

2023-11-22

Abstract:The electrochemical reduction of carbon dioxide to formic acid is a promising pathway to improve CO2 utilization and has potential applications as a hydrogen storage medium. In this work, a zero-gap membrane electrode assembly architecture is developed for the direct electrochemical synthesis of formic acid from carbon dioxide. The key technological advancement is a perforated cation exchange membrane, which, when utilized in a forward bias bipolar membrane configuration, allows formic acid generated at the membrane interface to exit through the anode flow field at concentrations up to 0.25 M. Having no additional interlayer components between the anode and cathode this concept is positioned to leverage currently available materials and stack designs ubiquitous in fuel cell and H2 electrolysis, enabling a more rapid transition to scale and commercialization. The perforated cation exchange membrane configuration can achieve >75% Faradaic efficiency to formic acid at <2 V and 300 mA/cm2 in a 25 cm2 cell. More critically, a 55-hour stability test at 200 mA/cm2 shows stable Faradaic efficiency and cell voltage. Technoeconomic analysis is utilized to illustrate a path towards achieving cost parity with current formic acid production methods.
Stabilized Cuδ+-OH species on in situ reconstructed Cu nanoparticles for CO2-to-C2H4 conversion in neutral media

Lei Wang,Zhiwen Chen,Yi Xiao,Linke Huang,Xiyang Wang,Holly Fruehwald,Dmitry Akhmetzyanov,Mathew Hanson,Zuolong Chen,Ning Chen,Brant Billinghurst,Rodney D L Smith,Chandra Veer Singh,Zhongchao Tan,Yimin A Wu

DOI: https://doi.org/10.1038/s41467-024-52004-2

2024-08-29

Abstract:Achieving large-scale electrochemical CO2 reduction to multicarbon products with high selectivity using membrane electrode assembly (MEA) electrolyzers in neutral electrolyte is promising for carbon neutrality. However, the unsatisfactory multicarbon products selectivity and unclear reaction mechanisms in an MEA have hindered its further development. Here, we report a strategy that manipulates the interfacial microenvironment of Cu nanoparticles in an MEA to suppress hydrogen evolution reaction and enhance C2H4 conversion. In situ multimodal characterizations consistently reveal well-stabilized Cuδ+-OH species as active sites during MEA testing. The OH radicals generated in situ from water create a locally oxidative microenvironment on the copper surface, stabilizing the Cuδ+ species and leading to an irreversible and asynchronous change in morphology and valence, yielding high-curvature nanowhiskers. Consequently, we deliver a selective C2H4 production with a Faradaic efficiency of 55.6% ± 2.8 at 316 mA cm-2 in neutral media.

Electrochemical CO 2 reduction to methane with remarkably high Faradaic efficiency in the presence of a proton permeable membrane

Highly Selective Electrochemical Reduction of CO 2 into Methane on Nanotwinned Cu

Progress of CO2 Electrochemical Methanation Using a Membrane Electrode Assembly

Self-supporting BiCu/carbon hybrid nanofiber membrane promotes efficient CO2 electroreduction to formate

MOF Encapsulating N-Heterocyclic Carbene-Ligated Copper Single-Atom Site Catalyst towards Efficient Methane Electrosynthesis

Electrochemical reduction of carbon dioxide with nearly 100% carbon monoxide faradaic efficiency from vacancy-stabilized single-atom active sites

Boosting Electrochemical CO2 Reduction to CO by Regulating the Porous Structure of Carbon Membrane

Highly Selective Electrochemical Reduction of CO2 into Methane on Nanotwinned Cu.

Electrochemical Reduction of Gaseous CO2 with a Catechol and Polyethyleneimine Co-Deposited Polypropylene Membrane

Nitrided copper-iron composite oxides derived from layered double hydroxides for enhanced carbon dioxide electroreduction to methane and formic acid

Low coordination number copper catalysts for electrochemical CO2 methanation in a membrane electrode assembly

Efficient Electrocatalytic Reduction of CO2 by Nitrogen-Doped Nanoporous Carbon-Carbon Nanotube Membranes - A Step Towards the Electrochemical CO2 Refinery

High-rate and selective conversion of CO2 from aqueous solutions to hydrocarbons

Selective CO2 electroreduction to multicarbon products exceeding 2 A cm−2 in strong acids via a hollow-fiber Cu penetration electrode

Pressure-Dependent CO 2 Electroreduction to Methane over Asymmetric Cu-N 2 Single-Atom Sites

Enhancing CO2 electroreduction to CH4 over Cu nanoparticles supported on N-doped carbon

Efficient electrocatalytic CO2 reduction to C2+ chemicals on internal porous copper

Halide-modulated Hollow-Fiber Cu penetration electrode boosts Ampere-Level CO 2 electroreduction to multicarbon products

Selective electrochemical methanation of carbon dioxide using a sulphide derived CuZn catalyst

A scalable membrane electrode assembly architecture for efficient electrochemical conversion of CO2 to formic acid

Stabilized Cuδ+-OH species on in situ reconstructed Cu nanoparticles for CO2-to-C2H4 conversion in neutral media