Abstract:In this work, melamine based magnetic covalent triazine polymers (MCTPs) was prepared by decoration of melamine based triazine polymers on the surface of magnetic Fe3O4@SiO2 nanoparticles. The polymer decoration is realized by nucleophilic substitution reaction between melamine (as functional monomer) and 1,4-dibromobutane (as crosslinking agent), which is simple, rapid and cost effective. The resultant MCTPs showed good affinity toward Cu2+, Cr3+ and Pb2+ with fast adsorption kinetic (7 min) and high adsorption capacities (38.3, 33.9 and 49.7 mg g−1 for Cu2+, Cr3+ and Pb2+, respectively). Besides, the prepared MCTPs can be reused after adsorption, desorption and regeneration steps, and the phase separation is highly efficient with the addition of an external magnet. Thus, MCTPs was employed as a magnetic solid-phase extraction (MSPE) sorbent for the extraction of trace Cu2+, Cr3+ and Pb2+ followed by graphite furnace atomic absorption spectrometry (GFAAS) determination. Then the extraction conditions of the above-mentioned MSPE-GFAAS method were optimized, including sample pH, extraction/elution time, sample volume, etc. Under the optimized conditions, the MCTPs based MSPE-GFAAS method exhibit the following merits: short extraction/elution time (10/3 min), high enrichment factor (125 folds) and low detection limit (2.9, 1.4 and 6.1 ng L-1 for Cu2+, Cr3+ and Pb2+, respectively). Finally, the proposed method was successfully employed for the determination of trace Cu2+, Cr3+ and Pb2+ in tap water, river water, lake water, human urine and human hair samples. The adequate recoveries of 85 ∼ 105% in spiked samples were achieved, suggesting the promising potential of MCTPs based MSPE-GFAAS method as an effective method for evaluating the environment and biological effect of metal ions.

Vortex-assisted magnetic solid-phase extraction of cadmium in food, medicinal herb, and water samples using silica-coated thiol-functionalized magnetic multiwalled carbon nanotubes as adsorbent

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples

Preparation of modified multiwalled carbon nanotubes (l-Arg-CS/MWCNTs-COOH/Fe3O4) as sorbent for dispersive solid phase extraction of Cu(II), Pb(II) and Cd(II) in wastewater samples

Application of magnetic carbon nanotube composite nanospheres in magnetic solid-phase extraction of trace perfluoroalkyl substances from environmental water samples

Solid phase extraction and trace monitoring of cadmium ions in environmental water and food samples based on modified magnetic nanoporous silica

Magnetic dispersive solid-phase extraction based on a novel adsorbent for the detection of triazole pesticide residues in honey by HPLC-MS/MS

Vortex‐Assisted Magnetic Solid‐Phase Extraction of Heavy Metals in Water and Food Samples Using Iron Oxide Nanoparticle‐Impregnated Carboxymethyl‐β‐Cyclodextrin

A Magnetized Nanoparticle Based Solid-Phase Extraction Procedure Followed by Inductively Coupled Plasma Atomic Emission Spectrometry to Determine Arsenic, Lead and Cadmium in Water, Milk, Indian Rice and Red Tea

Solid phase extraction of heavy metal ions based on a novel functionalized magnetic multi-walled carbon nanotube composite with the aid of experimental design methodology

On-line Ultrasound-Assisted Dispersive Micro-Solid-Phase Extraction Based on Amino Bimodal Mesoporous Silica Nanoparticles for the Preconcentration and Determination of Cadmium in Human Biological Samples

Preparation and evaluation of Fe3O4@C@NiCo-LDH@CDs composites for magnetic solid-phase extraction of trace endocrine disruptors

Composite hydrogel based on alginate-g-poly(acrylamide)/carbon nanotubes for solid phase extraction of metals from corn cereal samples

Rapid preparation of melamine based magnetic covalent triazine polymers for highly efficient extraction of copper(II), chromium(III) and lead(II) ions from environmental and biological samples

Caramelized carbonaceous shell-coated γ-Fe2O3 as a magnetic solid-phase extraction sorbent for LC-MS/MS analysis of triphenylmethane dyes

Solid-phase extraction using multiwalled carbon nanotubes and quinalizarin for preconcentration and determination of trace amounts of some heavy metals in food, water and environmental samples

A Natural Deep Eutectic Solvent–based Ultrasound-Vortex-assisted Dispersive Liquid–Liquid Microextraction Method for Ligand-less Pre-concentration and Determination of Traces of Cadmium Ions in Water and Some Food Samples

Synthesis and Surface Modification of Iron Oxide Nanoparticles for the Extraction of Cadmium Ions in Food and Water Samples: A Chemometric Study

Determination of Rhodamine B in Cosmetics, Candy, Water, and Plastic by a Novel Multiwalled Carbon Nanotube (MWCNT)@Zinc Oxide@Magnetite Nanocomposite for Magnetic Solid-Phase Extraction (MSPE) with Spectrophotometric Detection

Synthesis of magnetic multi-walled carbon nanotubes with layered double hydroxide (M-MWCNTs@MnAl-LDH) nanocomposite as an adsorbent for lead extraction

3DG Functionalized Magnetic Solid Phase Extraction Materials for the Efficient Enrichment of Hexamethylenetetramine in Vermicelli