Abstract:We predict then produce superhard metallic compound TaB2 via exploring crystal orientation resolved stress-strain relations. First-principles calculations identify prominent strain stiffening that generates superhigh indentation strengths of 46–49 GPa in the (001) oriented TaB2 crystal; in sharp contrast, dynamic instability diminishes strain stiffening even causes softening, leading to notably lower strengths around 30 GPa in the (110) and (100) orientations. Ensuing experimental synthesis creates well crystallized and textured (001) oriented TaB2 that exhibits indentation hardness of 45.9 GPa and electrical resistivity of 1.71×10−6Ωm, validating key superhard and metallic benchmarks. The present findings showcase an enabling protocol of crystal configuration engineering for selective property optimization, opening a path for rational design and discovery of long-sought but hitherto scarcely produced superhard metallic materials among vast transition-metal compounds.

What problem does this paper attempt to address?

The key problem that this paper attempts to solve is to develop a new type of super - hard metal compound TaB₂, and optimize its mechanical properties by analyzing the strain - hardening mechanism through crystal orientation. Specifically, the author aims to explore how to use crystal orientation engineering to achieve the协同 optimization of material hardness and metal conductivity through theoretical calculation and experimental verification. ### Main problems and solutions 1. **Limitations of traditional super - hard materials**: - Traditional super - hard materials such as diamond and cubic boron nitride (c - BN) are restricted by harsh synthesis conditions and performance limitations in applications. - Many transition metal (TM) compounds will experience structural softening under large strains, resulting in a hardness usually between 15 - 30 GPa, far below the 40 GPa threshold for super - hard materials. 2. **Exploration of the strain - hardening mechanism**: - The strain - hardening mechanism is relatively rare in crystalline solids, but has been achieved in some materials such as nano - twinned diamond and c - BN. - Through first - principles calculations, the author predicted a significant strain - hardening phenomenon in TaB₂ under the (001) orientation, making its hardness reach 46 - 49 GPa, while under the (110) and (100) orientations, it shows a lower hardness (about 30 GPa), which is due to dynamic instability and softening caused by deformation. 3. **Experimental verification and characterization**: - Highly crystalline and well - oriented (001) - oriented TaB₂ films were synthesized by magnetron sputtering technology. - The experimental results show that the (001) - oriented TaB₂ has a hardness of 45.9 GPa and a resistivity of 1.71×10⁻⁶ Ω·m, verifying its super - hard and metallic properties. ### Key conclusions - **Crystal - orientation - dependent strengthening mechanism**: The (001) - oriented TaB₂ exhibits significantly high hardness under the action of the strain - hardening mechanism, while other orientations have lower hardness due to dynamic instability. - **Combination of theory and experiment**: By guiding experimental synthesis with theoretical calculations, the super - hard metal material TaB₂ with excellent mechanical properties was successfully prepared. - **Prospect**: This research provides a new path for the rational design and discovery of more super - hard metal materials, especially in transition metal compounds, through which the mechanical properties of materials can be optimized by crystal orientation engineering. ### Formula display In the nano - indentation test, the calculation formulas for hardness \( H \) and reduced elastic modulus \( E_r \) are as follows: \[ H=\frac{P_{\text{max}}}{A} \] \[ E_r = \left(\frac{\sqrt{\pi}}{2\beta}\right) \left(\frac{S}{\sqrt{A}}\right) \] where: - \( P_{\text{max}} \) is the maximum load obtained from the loading - unloading curve. - \( A \) is the contact area. - \( \beta \) is a constant related to the indenter shape. - \( S \) is the slope at the top of the unloading curve. The reduced elastic modulus \( E_r \) represents the simultaneous elastic deformation of the film and the indenter tip in the nano - indentation test, and the elastic modulus \( E \) of the film can be calculated by the following formula: \[ \frac{1}{E_r}=\frac{(1 - \nu^2)}{E}+\frac{(1 - \nu_i^2)}{E_i} \] where: - \( \nu \) and \( E \) are the Poisson's ratio and elastic modulus of the film, respectively. - \( \nu_i \) and \( E_i \) are the Poisson's ratio (\( \nu_i = 0.07 \)) and elastic modulus (\( E_i = 1140 \, \text{GPa} \)) of the indenter tip, respectively. Through these formulas, the hardness and elastic modulus of the film can be accurately calculated, thereby verifying its super - hard and metallic properties.

Superhard metallic compound TaB 2 via crystal orientation resolved strain stiffening

Tantalum Diboride: The Superhard and Metallic Boride

Solving Strength–Toughness Dilemma in Superhard Transition-Metal Diborides via a Distinct Chemically Tuned Solid Solution Approach

Crystal Field Splitting Is Limiting The Stability And Strength Of Ultra-Incompressible Orthorhombic Transition Metal Tetraborides

Crystal structure and physical properties of Ti2B5 predicted by first principles calculations

Electronic structures and strengthening mechanisms of superhard high-entropy diborides

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Unusual Mechanical Strengths of Ta2O5 Stable Phases: A First-Principles Calculation Study

Prediction of fundamental properties of Be-B-Ta based novel ternary compounds from first-principles calculations

Stability and Strength of Transition-Metal Tetraborides and Triborides

Insight into the Structure Dependence on Physical Properties of the High Temperature Ceramics TaB2 Boride

Theoretical study on mechanical and electronic properties of ternary diborides Sc0.5V0.5B2, Sc0.5Nb0.5B2 and Sc0.5Ta0.5B2

Ultra-high strength Co–Ta–B bulk metallic glasses: Glass formation, thermal stability and crystallization

Microstructure characterization, mechanical properties and toughening mechanism of TiB 2 -containing conventional cast TiAl-based alloy

Fundamental Constraints on the Strength of Transition-Metal Borides: the Case of CrB4

First principles calculation on electronic structures and mechanical properties of TiCrTaV high–entropy alloy

Toughening a superstrong carbon crystal: Sequential bond-breaking mechanisms

Superhardness Induced by Grain Boundary Vertical Sliding in (001)-textured ZrB<sub>2</sub> and TiB<sub>2</sub> Nano Films

Enhanced Hardness in Transition-Metal Monocarbides via Optimal Occupancy of Bonding Orbitals

Effect of tantalum concentration on the microstructure and mechanical properties of novel W–Ta-Re alloy

Intersectant Coherent Twin Boundaries Governed Strong Strain Hardening Behavior in Nanocrystalline Cu