Keeping the ‘Goose’ on the Menu: Response to Commentaries on Financial Incentives in Health Behaviour Change

M. Lynagh,R. Sanson-Fisher,B. Bonevski

DOI: https://doi.org/10.1007/s12529-013-9342-x

2014-02-01

International Journal of Behavioral Medicine

Abstract:

What problem does this paper attempt to address?

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Yuwu Zhang,Minghao Li,Zizhen Qi,Rong Chen,Yuliang Lin,Shunze Cao,Xiangcheng Li,Ruitao Tang,Huanming Chen

DOI: https://doi.org/10.1016/j.ijmecsci.2024.109781

IF: 7.3

2025-01-01

International Journal of Mechanical Sciences

Abstract:Enhancing buffering capacity, flexibility, and energy absorption to withstand large deformations in structure remains a challenge. Bio-inspired horseshoe lattice structures, with their curved trusses, exhibit distinct mechanical characteristics compared to conventional metamaterials. However, their mechanical properties under in-plane compression have been rarely explored. This study characterised and modelled three types novel 3D-printed horseshoe lattice structures, totalling 12 configurations, with unit cell geometry varying based on cell-wall angles ranging from 120 degrees to 210 degrees. The implementation of the FE simulation based on the three network viscoplastic (TNV) model showed good agreement with the experiments. The results demonstrated that the cell-wall angle in the geometry and the cross-lap joint topology were significantly associated with the failure mechanism of the unit cell and the overall non-linear mechanical behaviour. Increasing the cell wall angles can prevent beams from failing due to bending and buckling fractures, facilitate the initiation internal contacts and stretching during in-plane compression. This reveals a configurable mechanism where the flexibility and stability of the lattice structure can trigger strain hardening, resulting in an increase load-bearing capacity. The sensitivity to strain hardening varies depending on the order of cross-laps within the topology. A colour-pattern tracking method was employed to monitor the progressive stabilisation of lattice structures, and offering a novel approach for the future design of flexible, configurable, and programmable horseshoe-based lattice structures.
ANALYSIS OF SUPPORT DISPLACEMENT EFFECT ON SADDLE-SHAPED MEMBRANE STRUCTURE

Wang Xin,Guan Fuling

2008-01-01

Abstract:In the construction process of a membrane structure,corrugation,ponding and tearing often occur on the surface of membrance after tensioning,for which the support displacement is the main reason.By constructing a saddle-shaped membrane structure model to simulate the effects of support displacement on the upper membrane structure,it is analysed the sensational degree of the prestress loss,stress concentration and stress relaxation in membrane structures.It is concluded that the displacement permitted by the construction code has a better adaptabilty.
Mechanical performance and optimization strategies of mantis shrimp rod inspired beam structural composites

Juqi Zhang,Weijing Niu,Yongcun Li,Xiaodong Wu,Zhangxin Guo,Yunbo Luan

DOI: https://doi.org/10.1557/s43578-024-01323-7

IF: 2.7

2024-03-22

Journal of Materials Research

Abstract:Inspired by the internal spiral structure of the mantis shrimp claw rod, a new type of beam-shaped composite materials with spiral-layered arrangement were designed, and the corresponding strengthening and toughening mechanisms with different spiral arrangement modes were explored. It is found that, unlike the existing shells or plates with spiral structures, a smaller spiral angle is of great significance to coordinate the contradiction between strength and toughness of beam materials. As the angle changes (small spiral angle), the full-field distribution of each stress component will undergo significant changes, leading to a transformation of the key stress components that dominate the damage and failure behavior. By adjusting the spiral angle, certain normal stress components inside can be reduced to improve the strength, and certain shear stress components can be increased to improve the toughness. These results will provide optimization strategies for the mechanical design of beam.Graphical abstractThe beam with an internal structure of spiral laminated fiber has been designed. Its strength and toughness can be regulated and optimized by the stress distribution and the deformations and failure behavior controlled by the spiral angle.

materials science, multidisciplinary
Optimized Hierarchical Structure and Chemical Gradients Promote the Biomechanical Functions of the Spike of Mantis Shrimps

Shan Li,Pan Liu,Weiqin Lin,Jie Tian,Chunguang Miao,Xiao Zhang,Ruogu Zhang,Jinlan Peng,Hong Zhang,Ping Gu,Zuoqi Zhang,Zhengzhi Wang,Tianzhi Luo

DOI: https://doi.org/10.1021/acsami.1c02867

2021-04-06

Abstract:The tail spike of the mantis shrimp is the appendage for counteracting the enemy from behind. Here, we investigate the correlations between the chemical compositions, the microstructures, and the mechanical properties of the spike. We find that the spike is a hollow beam with a varying cross section along the length. The cross section comprises four different layers with distinct features of microstructures and chemical compositions. The local mechanical properties of these layers correlate well with the microstructures and chemical compositions, a combination of which effectively restricts the crack propagation while maximizing the release of strain energy during deformation. Finite element analysis and mechanics modeling demonstrate that the optimized structure of the spike confines the mechanical damage in the region near the tip and prevents catastrophic breakage at the base. Furthermore, we use a 3D printing technique to fabricate multiple hollow cylindrical samples consisting of biomimetic microstructures of the spike and confirm that the combination of the Bouligand structure with radially oriented parallel sheets greatly improves the toughness and strength during compression tests. The multiscale design strategy of the spike revealed here is expected to be of great interest for the development of novel bioinspired materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02867?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02867</a>.Four-layered structure of the longitudinal section of the spike of mantis shrimp, SEM images, Raman spectroscopy, XRD patterns, EDS maps, high-resolution measurement of the mechanical properties of the transversal cross section measured by nanoindentation, mechanical properties of FH and SH, fractured tip of the spikes of mantis shrimp, von Mises stress, spatial distribution of the six stress components in the spike, representation of a tapered curved beam model, comparison between the simulation results based on the isotropic and orthotropic models, compression test of the whole spike, forces and moments of the venom-injection element, and mechanical properties of the different sublayers of the spike (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02867/suppl_file/am1c02867_si_001.pdf">PDF</a>)Movie S1: The 3D reconstruction of the CT images of the spike (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02867/suppl_file/am1c02867_si_002.avi">AVI</a>)Movies S2: The reconstruction of the CT images of the cracks in the spike (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02867/suppl_file/am1c02867_si_003.avi">AVI</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Heterostructured mechanical metamaterials inspired by the shell of Strombus gigas

Juzheng Chen,Hao Wu,Jingzhuo Zhou,Ziyong Li,Ke Duan,Ruihan Xu,Tianyi Jiang,Hongyuan Jiang,Rong Fan,Roberto Ballarini,Yang Lu

DOI: https://doi.org/10.1016/j.jmps.2024.105658

IF: 5.582

2024-04-30

Journal of the Mechanics and Physics of Solids

Abstract:Despite being highly mineralized, the shells of molluscs exhibit superior strength and toughness because their architectural designs control the evolution of cracks and other types of localized deformation such as shear bands. The crossed-lamellar design of the shell of Strombus gigas , whose hierarchy consists of four distinct lamellar-shaped features assembled in a three-dimensional arrangement, represents the toughest of all seashells. A mechanical metamaterial that adapts the geometrical design of this queen conch is anticipated to circumvent the typical trade-offs between strength-ductility and strength-density. Inspired by the three-dimensional hierarchical and interactive architecture of the crossed-lamellar microstructure, we instruct the design of bio-inspired metamaterials that mitigate failure from the extension of a single shear band and instead develop numerous smaller bands confined within the individual plank-like zones introduced in their layered geometric design. The measured strength properties of these materials are found to increase in inverse proportion to the square root of the thickness of the layers in the hierarchy as a result of progressive deformation enabled by cross-layer interactions. The results provide a new perspective on the design of strong and tough mechanical metamaterials.

materials science, multidisciplinary,mechanics,physics, condensed matter
Investigation on the Effect of the Multilayered Porous Structure of Sea Urchin Skeleton on Its Mechanical Behavior

Hui Yu,Jianbao Li,Zhenhao Hou,Jianlin Li,Yongjun Chen,Chunfu Lin

DOI: https://doi.org/10.1007/s42235-020-0038-z

IF: 2.995

2020-01-01

Journal of Bionic Engineering

Abstract:In this paper, the effect of stereom structure on the mechanical behavior of the Sea Urchin Inorganic Skeleton (SUIS) has been studied. The stereom microstructure of both Anthocidaris crassispina and Tripnenstes gratilla was characterized by Scanning Electron Microscopy (SEM). Results indicate that a three-layer porous structure consisting of a growth, a support, and a resorption (GSR) layer is a common denominator for both species. The effect of GSR layer order on the mechanical behavior of the SUIS was studied by a finite element method. The results show that the GSR model could effectively reduce the maximum tensile stress on its meridional sutures under unidirectional pressure, hydrostatic pressure, and self-weight situation. For a fabricated three-layered ceramic test strips with different layer orders, the mechanical properties have a completely opposite performance compared with the compressive properties of the calculated SUIS-like models. This indicates that the GSR structure can effectively improve the mechanical properties of the SUIS, but it cannot be applied to bionics without considering its synergistic effect with the macro-structure of the SUIS. This is a typical example of bionic invalidation by single structure, where multi-level structure bionics may be an effective solution.
Study on impact resistance behaviors of a novel composite laminate with basalt fiber for helical-sinusoidal bionic structure of dactyl club of mantis shrimp

Qigang Han,Shaoqian Shi,Zhanhang Liu,Zhiwu Han,Shichao Niu,Junqiu Zhang,Hanlin Qin,Yanbiao Sun,Jiahui Wang

DOI: https://doi.org/10.1016/j.compositesb.2020.107976

2020-06-01

Abstract:<p>The microstructure of the dactyl club of mantis shrimp is mainly divided into two regions, the impact region and the periodic region, which their synergy make the dactyl club have better impact resistance. It is provided innovative inspiration by two regions cooperation for the manufacture of high-energy absorption and impact-resistant fiber composite laminates. In this paper, a novel dactyl-inspired helical-fiber sinusoidal-structure laminate (HSL) was manufactured by unidirectional basalt fiber prepreg based on the impact region and the periodic region of dactyl club. The experimental results confirmed the accuracy of the finite element simulation results. The HSL was compared with unidirectional-fiber flat laminate (UFL), unidirectional-fiber sinusoidal-structure laminate (USL) and helical-fiber flat laminate (HFL) in low-velocity impact tests. As a result, the maximum impact peak force of the HSL was 6593.45 N, which increased of 65.29%, 108.05% and 13.00% compared with that of the UFL (3988.80 N), USL (3169.21 N) and HFL (5835.20 N). Although the UFL and USL had higher absorption energy, they all have different degrees of damage, and under the same conditions, the HSL had less damage than HFL, indicating that the HSL had better impact resistance. The excellent performance of the HSL could be attributed to the helical-sinusoidal structure. The helical arrangement of the fibers enhances the resistance of the HSL, makes crackle propagation difficult. The sinusoidal structure of the HSL enhanced its cushioning ability for impact forces. Therefore, the HSL is suitable for parts that require better impact resistance.</p>
Hierarchical structure design of Strombus gigas shell inspired laminated artificial composites and the mechanical performance optimization strategy

Song Liu,Yunbo Luan,Zhihui Zhou,Chenchen Song,Zhihua Wang,Zhangxin Guo,Yongcun Li

DOI: https://doi.org/10.1080/15376494.2022.2057626

2022-04-05

Mechanics of Advanced Materials and Structures

Abstract:Strombus gigas shell is a natural biocomposite with good strength and extraordinary toughness, inspired by its internal refined hierarchical microstructures, a soft and hard phases composed cross-laminated hierarchical artificial structural composite that reinforced by discontinuous fiber was designed and prepared by 3D printing, and an investigation on the failure behavior and its strengthening and toughing mechanisms was carried out. It shows that the geometric configuration of the crossed-structure will regulate the local stress status in the hard phase and soft interface of the hierarchical structure significantly, and four different failure modes of this structure were proposed. Through the optimal design of the crossed-structure, the internal structure will undergo adaptive adjustment during loading process, then multiple failure forms and energy dissipation modes may burst out together and realize the improved combination of strength and toughness. This result may provide an optimization strategy for the lightweight composites design and additive manufacturing process.

materials science, multidisciplinary,mechanics, composites, characterization & testing
The relationship between mechanical properties and crossed-lamellar structure of mollusk shells

Yan Liang,Jie Zhao,Lai Wang,Feng-min Li

DOI: https://doi.org/10.1016/j.msea.2006.09.156

2008-01-01

Abstract:Composites produced in nature, such as mollusk shells, bones, etc., are renowned for their unique structures and excellent properties. In this paper the microstructure and mechanical properties of the shell of Conus betulina Linnaeus are investigated. The results indicate that the mechanical properties of the shell are anisotropic. After removal of the organic protein in the shell, the three-point bending strength significantly decreases, to about 1/20th or 1/30th of the original value. The organic matrix plays an important role in the hierarchical structure of the conch shells, as it promotes load transfer between adjacent aragonite layers.
Mechanical Model of Bio-Inspired Composites with Sutural Tessellation

Chao Gao,Yaning Li

DOI: https://doi.org/10.1016/j.jmps.2018.09.015

IF: 5.582

2018-01-01

Journal of the Mechanics and Physics of Solids

Abstract:Architectured composites with sutural tessellations across all length scales are found in the armor systems of many fauna and flora species in nature. These composites are typically composed of relatively stiff building blocks articulated via compliant wavy suture seam, showing a remarkable jigsaw-puzzle-like sutural tessellation. Inspired by these interesting natural architecture materials, bio-inspired designs of composite plates with hexagonal, diamond and rectangular building blocks and triangular suture tessellations were developed. Generalized closed-form analytical expressions for the effective stiffnesses along major axes of symmetry of these designs were derived and finite element (FE) simulations were performed to verify the analytical solution. Suture tessellation was shown to be essential in determining the mechanical properties of the composite plates. The influences of suture waviness, suture dominancy, the shape of the building blocks and the stiffness ratio of the suture tessellation were evaluated. The results provide design guidelines for widely tuning the mechanical properties of the biomimetic composite plates via tailoring suture tessellation.
How to select discrete or continuous interfaces in biological materials to achieve a strength-toughness tradeoff

Zheyuan Yu,Peiran Li,Zhilong Peng,Yin Yao,Shaohua Chen

DOI: https://doi.org/10.1016/j.jmps.2023.105502

IF: 5.582

2024-02-01

Journal of the Mechanics and Physics of Solids

Abstract:Many biological materials, such as nacre, bone and turtle shell cuticle, can successfully achieve a tradeoff between strength and toughness, which is attributed to the stacked microstructure formed by soft and hard phases. However, among these biological materials, the soft phase-formed interfaces of some biological materials are continuous, while those of some are discrete. In this paper, a shear lag model considering an elasto-plastic discrete interface is established to reveal the selection mechanism of two kinds of interfaces in different biological materials, thus solving the tradeoff between strength and toughness. Based on the shear lag model, theoretical solutions of the stress and displacement in the hard phase and the shear stress in the soft interfacial phase are obtained for a general case with any number of interfacial bonding segments. The relationship between the effective stress and effective strain of the representative volume element (RVE) is further achieved, with the help of which the strength and toughness of staggered bio-composites can be analyzed. Corresponding experiments based on 3D-printed samples are further performed to verify the theoretical predictions. It is found that, when the hard phase and soft phase have comparable mechanical properties, like those in turtle shell cuticle, the interface guarantees a high load transfer efficiency to generate the ultimate stress in the platelet, while its discrete distribution leads to a higher interfacial shear stress level than that in a continuously bonded interface. Such a material-structure co-action induces a hybrid damage mode of hard phase fracture and soft phase failure, consequently leading to an excellent strength-toughness tradeoff. However, if the mechanical properties of two phases differ significantly, like those in nacreous materials or bone, a discrete interface should result in a unique damage mode of interface failure and a low utilization efficiency of hard phase. Instead, a continuous interface in this case is more conducive to obtain a tradeoff between strength and toughness. All the results demonstrate that biological materials choose different interface structures to meet the requirements of strength and toughness matching, based on the differences in the mechanical properties of soft and hard phases. Such a selection mechanism provides a direct reference for the optimal design of artificial composites with an excellent strength-toughness match.

mechanics,materials science, multidisciplinary,physics, condensed matter
Enhanced strength-ductility synergy of laser additive manufactured stainless steel/Ni-based superalloy dissimilar materials characterized by bionic mechanical interlocking structures

Xingran Li,Pengfei Jiang,Minghao Nie,Zhenglin Liu,Mengqi Liu,Yiming Qiu,Zhikai Chen,Zhihui Zhang

DOI: https://doi.org/10.1016/j.jmrt.2023.08.217

IF: 6.267

2023-09-02

Journal of Materials Research and Technology

Abstract:The unique mechanism of toughness enhancement found in natural materials has served as inspiration for the development of a new generation of dissimilar metal materials (DMMs). Here we present a bionic mechanical interlocking structure strategy that stainless steel 316L and Inconel 625 DMMs with an enhanced strength-conductivity trade-off processed by laser additive manufacturing (AM), possessing an ultimate tensile strength of 675.64 MPa, and a uniform elongation of 33.6%. The incompatible deformation between SS316L (plastic deformation) and IN625 (non-deformation) contributes to overcoming the strength-ductility trade-off. The integration of alternating soft and hard non-uniform structures plays a pivotal role in effectively absorbing and dissipating the energy introduced by external loads during crack propagation. This geometric arrangement and multilevel structure at the interface notably reduces the effective stress intensity factor along the crack path, leading to added resistance against loading. The multi-strengthening mechanism coupled with the heterogeneous deformability gives the material excellent strength-ductility synergy, especially the bionic mechanical interlocking structure extending the crack expansion path, which helps to avoid premature failure of weak interface layers. These findings will provide new insights into the controlled design of high-performance DMMs, which highlights the potential to inherit merits from constitutive materials for better strength-ductility combinations.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Study on the Mechanical Properties of Bionic Coupling Layered B4C/5083Al Composite Materials

Qian Zhao,Yunhong Liang,Qingping Liu,Zhihui Zhang,Zhenglei Yu,Luquan Ren

DOI: https://doi.org/10.3390/ma11050680

IF: 3.4

2018-04-26

Materials

Abstract:Based on microstructure characteristics of Meretrix lusoria shell and Rapana venosa shell, bionic coupling layered B₄C/5083Al composites with different layered structures and hard/soft combination models were fabricated via hot pressed sintering. The simplified bionic coupling models with hard and soft layers were similar to layered structure and hardness tendency of shells, guiding the bionic design and fabrication. B₄C/5083Al composites with various B₄C contents and pure 5083Al were treated as hard and soft layers, respectively. Hot pressed sintering maintained the designed bionic structure and enhanced high bonding strength between ceramics and matrix. Compared with B₄C/5083Al composites, bionic layered composites exhibited high mechanical properties including flexural strength, fracture toughness, compressive strength and impact toughness. The hard layers absorbed applied loads in the form of intergranular fracture. Besides connection role, soft layers restrained slabbing phenomenon and reset extension direction of cracks among layers. The coupling functions of bionic composites proved the feasibility and practicability of bionic fabrication, providing a new method for improvement of ceramic/Al composite with properties of being lightweight and high mechanical strength.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Multiscale Structural Design and Fracture Control of High-Performance Biomimetic Materials

Kaijin Wu,Yong Ni

DOI: https://doi.org/10.32604/icces.2023.09028

2023-01-01

Abstract:Bioinspired architectural design for composites with much higher impact-resistance and fracture-resistance than that of individual constituent remains a major challenge for engineers and scientists. Inspired by the survival war between the mantis shrimps and abalones, we develop multiscale mechanical methods to design structures and control fractures in high-performance biomimetic materials. The first point is the optimization design of impact-resistant nacre-like materials [1-4]. By a combination of simulation, additive manufacturing, and drop tower testing we revealed that, at a critical interfacial strength or a critical prestress, the competition between intralayer cracks and interlayer delamination, or the synergistic effect between the prestress-enhanced tablets sliding and prestress-weakened structural integrality, result in optimized impact resistance of nacre-like structures. Furthermore, the interfacial strength design and the prestressing strategy were easily implemented to a designed nacre-inspired separator to enhance the impact resistance of lithium batteries. Later, we designed a discontinuous fibrous Bouligand (DFB) architecture [5], whose fracture-energy dissipations are insensitive to initial crack-orientations and show optimized values at critical pitch angles. Fracture mechanics analyses demonstrate that the hybrid toughening mechanisms of crack twisting and crack bridging mode arising from DFB architecture enable excellent fracture-resistance with crack-orientation insensitivity. The compromise in competition of energy dissipations between crack twisting and crack bridging is identified as the origin of maximum fracture energy at a critical pitch angle. We further illustrate that the optimized fracture energy can be achieved by tuning fracture energy of crack bridging, pitch angles, fiber lengths and twist angles distribution in DFB composites. Our findings shed light on how nature have evolved materials to exceptional impact resistance and fracture toughness, and provide the generic design strategies for bioinspired formidable impactresistant and fracture-resistant materials.
A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures

Qiang Ma,Huanyu Cheng,Kyung-In Jang,Haiwen Luan,Keh-Chih Hwang,John A Rogers,Yonggang Huang,Yihui Zhang

DOI: https://doi.org/10.1016/j.jmps.2016.02.012

Abstract:Development of advanced synthetic materials that can mimic the mechanical properties of non-mineralized soft biological materials has important implications in a wide range of technologies. Hierarchical lattice materials constructed with horseshoe microstructures belong to this class of bio-inspired synthetic materials, where the mechanical responses can be tailored to match the nonlinear J-shaped stress-strain curves of human skins. The underlying relations between the J-shaped stress-strain curves and their microstructure geometry are essential in designing such systems for targeted applications. Here, a theoretical model of this type of hierarchical lattice material is developed by combining a finite deformation constitutive relation of the building block (i.e., horseshoe microstructure), with the analyses of equilibrium and deformation compatibility in the periodical lattices. The nonlinear J-shaped stress-strain curves and Poisson ratios predicted by this model agree very well with results of finite element analyses (FEA) and experiment. Based on this model, analytic solutions were obtained for some key mechanical quantities, e.g., elastic modulus, Poisson ratio, peak modulus, and critical strain around which the tangent modulus increases rapidly. A negative Poisson effect is revealed in the hierarchical lattice with triangular topology, as opposed to a positive Poisson effect in hierarchical lattices with Kagome and honeycomb topologies. The lattice topology is also found to have a strong influence on the stress-strain curve. For the three isotropic lattice topologies (triangular, Kagome and honeycomb), the hierarchical triangular lattice material renders the sharpest transition in the stress-strain curve and relative high stretchability, given the same porosity and arc angle of horseshoe microstructure. Furthermore, a demonstrative example illustrates the utility of the developed model in the rapid optimization of hierarchical lattice materials for reproducing the desired stress-strain curves of human skins. This study provides theoretical guidelines for future designs of soft bio-mimetic materials with hierarchical lattice constructions.
Low-velocity impact damage of bionic turtle shell sandwich laminates with different suture shapes

Xu Zhang,Benzhi Min,Shouji Zhao,Qiang Fu,Di Zhang,Zhenqing Wang

DOI: https://doi.org/10.1177/10996362241245531

2024-04-07

Journal of Sandwich Structures & Materials

Abstract:Journal of Sandwich Structures &Materials, Ahead of Print. Turtle shells have evolved over millions of years, developing exceptional mechanical properties such as high relative strength and toughness, rendering them highly effective in resisting impacts. This study delves into the impact resistance of bionic turtle shell structures with various suture shapes. This article analyzes the low-velocity impact of carbon fiber epoxy resin prepreg (CF/EP) composite sandwich panels with a suture interface by using the finite element simulation. The simulations encompass closed and unclosed models featuring bonded and unbonded tips, each with diverse trapezoidal geometries (triangular, trapezoidal, anti-trapezoidal, and rectangular). The findings reveal that sandwich structures with suture interfaces demonstrate significantly enhanced impact resistance compared to those lacking sutures, displaying 3–9 times greater deformation capacity and 20–30 times higher energy absorption capacity. The impact resistance of the triangular suture interface exceeded that of other bioinspired suture shapes, with trapezoidal and anti-trapezoidal sutures also enhancing stiffness, strength, and toughness. Additionally, a 6° bonded tip angle resulted in optimal performance for the triangular suture interface across all analyzed perspectives. The simulation study in this paper provides comprehensive and reliable data on low-velocity impact results, offering fundamental insights for researchers to design composite material structures that meet specific mechanical requirements effectively. Additionally, it offers novel ideas for the connection of protective structures, such as artificial armor.

engineering, mechanical,materials science, composites, characterization & testing
Investigation of Mechanical Properties and Microstructural Evolution in Pure Copper with Dual Heterostructures Produced by Surface Mechanical Attrition Treatment

Lele Sun,Xingfu Li,Cong Li,Yulan Gong,Zhengrong Fu,Jingran Yang,Shuwei Quan,Shen Qin,Xinkun Zhu

DOI: https://doi.org/10.3390/met14111217

IF: 2.695

2024-10-26

Metals

Abstract:Heterostructured materials consist of heterogeneous zones with dramatic variations in mechanical properties, and have attracted extensive attention due to their superior performance. Various heterostructured materials have been widely investigated in recent years. In the present study, a combination of two different types of heterogeneous structures, a surface bimodal structure and gradient structure, was designed using the traditional surface mechanical attrition treatment (SMAT) method in pure copper, and the mechanical properties and microstructural evolution of dual-heterostructure Cu were studied in depth. In total, 100 stainless steel balls with a diameter of 6 mm were utilized to impact the specimen surface at room temperature for a short period of time. In this work, the sample surface was divided into hard areas and soft areas, along with a roughly 90 μm gradient structure in the cross-sectional direction after 30 s of SMAT processing. After the partial SMAT processing, lasting 30 s, the strength increased to 158.0 MPa and a considerable ductility of 25.7% was sustained, which overcomes the strength–ductility trade-off. The loading–unloading–reloading (LUR) test was utilized to measure the HDI stress, and the result showed that the HDI stress of the partial SMAT sample was much higher than the annealed one, especially for the Cu-SMAT-30S specimen, the strength of which increased from 80.4 MPa to 153.8 MPa during the tensile test. An in situ digital image correlation (DIC) investigation demonstrated that the strain developed stably in the Cu-SMAT-10S specimen. Furthermore, electron backscatter diffraction (EBSD) was carried out to study the microstructural evolution after partial SMAT processing; the KAM value increased to 0.34 for the Cu-SMAT-10S specimen. This research provides insights for the effective combination of superior strength and good ductility in dual-heterostructure materials.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Design of bimetallic interpenetrating biomimetic structures and additive-casting synergetic manufacturing

Chenglong Bi,Yu Wang,Bin Liu,Chengze Li,Wenpeng Shi,Hong Xv,Yibo Suo

DOI: https://doi.org/10.1016/j.jallcom.2024.176676

IF: 6.2

2024-10-03

Journal of Alloys and Compounds

Abstract:Inspired by biological materials like shell nacre, biphase interpenetrating materials with alternating soft and hard phases significantly enhance mechanical properties. However, their application in metallic materials is still unexplored. This study investigates the microstructure and fracture patterns of steel/aluminum interpenetrating composites with a Diamond TPMS structure, fabricated via vacuum infiltration casting. We found that steel and aluminum form a biomimetic "brick-and-mortar" structure under the Diamond framework, significantly enhancing the composites' ductility and strength. The interfacial bonding layer, composed of Fe 2 Al 5 , Al 8 Fe 2 Si, and Al 4.5 FeSi, shows a hardness far exceeding the adjacent base materials. This hardness increases unevenly with distance from the interface. Tensile tests reveal that structurally periodic interpenetrating materials outperform both trapezoidal interpenetrating and planar materials. Upon fracturing, cracks initially form at the interfacial bonding layer and gradually spread into the interpenetrating region. Subsequently, under tensile and shear stress from mechanical interlocking, brittle fractures develop between aluminum components. The crack then extends into the steel framework, causing ductile fractures and complete failure of the composite.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Bio-inspired hybrid helicoidal microstructure: Balancing carrying capacity and prolonged residual load

Xinyue Li,Xiaofang Zhang,Yanan Yuan

DOI: https://doi.org/10.1016/j.compscitech.2023.110249

IF: 9.1

2023-09-14

Composites Science and Technology

Abstract:The exoskeleton of the Homarus americanus lobster was found to exhibit hybridization helicoidal structural features through electron microscopy. Unlike the uniform helicoidal structure previously studied, the inner and outer cuticles showed significant variations in stacking height and pitch angle. The present study marks the first successful attempt at imitating composite laminates with hybrid helicoidal microstructures using ultra-thin ply. The experimental results showed that the hybrid helicoidal structure demonstrated better head-on combat capability and provided superior protection to internal tissues and organs compared to the uniform helicoidal structure. This was attributed to its higher carrying capacity and larger prolonged residual loading rate. Furthermore, the use of ultra-thin prepreg provides ample design space for bionic helicoidal design and preparation of composite materials. These findings suggest that hybrid helical microstructure may have potential applications in areas where bend/shear damage resistance is critical, such as in protective equipment for athletes or military personnel. The study highlights the importance of exploring natural structures and their mechanical properties for developing novel composite materials with superior performance.

materials science, composites
Microstructures and Friction-Wear Characteristics of Bivalve Shells

X Jia,XM Ling,DH Tang

DOI: https://doi.org/10.1016/j.triboint.2005.05.001

IF: 5.62

2006-01-01

Tribology International

Abstract:All structural biological materials are nearly composite materials and often exhibit some superior properties. In order to obtain useful information for the design and manufacture of composite materials, the microstructures and the friction-wear properties of three species of bivalve shells were studied in this paper. The results showed that the microstructure of tested bivalve shells I (Meretrix meretrix) and II (Saxidomus purpuratus) are constructed of about 10–100μm small platelets stacked in brick-and-mortar fashion and small platelets consist of lamella clusters. The lamellae are parallel inside the individual cluster. The orientations of adjacent lamellae clusters form the angle of about 70–90°. The thickness of lamellae is about about 0.2–0.6μm. The organic component and the calcium carbonate form the three-dimensional net-like microstructure, respectively, which interlaces each other to form the microstructure of the bivalve shells. The microstructure of bivalve shells III (Periglypta chemnitzii) is constructed of about 10–40μm particles with the internal structure of lamellae clusters as the above mentioned. Under the experimental conditions of medium-carbon steel counterpart and sliding dry friction, the friction coefficient of the bivalve shells is lower than that of grey cast iron HT200. The organic component of the bivalve shells can transfer to the friction interface and form organic film, which not only lubricates the friction interface but also protects the friction surface. The organic component is very important to the friction-wear property of the shells.

Keeping the ‘Goose’ on the Menu: Response to Commentaries on Financial Incentives in Health Behaviour Change

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

ANALYSIS OF SUPPORT DISPLACEMENT EFFECT ON SADDLE-SHAPED MEMBRANE STRUCTURE

Mechanical performance and optimization strategies of mantis shrimp rod inspired beam structural composites

Optimized Hierarchical Structure and Chemical Gradients Promote the Biomechanical Functions of the Spike of Mantis Shrimps

Heterostructured mechanical metamaterials inspired by the shell of Strombus gigas

Investigation on the Effect of the Multilayered Porous Structure of Sea Urchin Skeleton on Its Mechanical Behavior

Study on impact resistance behaviors of a novel composite laminate with basalt fiber for helical-sinusoidal bionic structure of dactyl club of mantis shrimp

Hierarchical structure design of Strombus gigas shell inspired laminated artificial composites and the mechanical performance optimization strategy

The relationship between mechanical properties and crossed-lamellar structure of mollusk shells

Mechanical Model of Bio-Inspired Composites with Sutural Tessellation

How to select discrete or continuous interfaces in biological materials to achieve a strength-toughness tradeoff

Enhanced strength-ductility synergy of laser additive manufactured stainless steel/Ni-based superalloy dissimilar materials characterized by bionic mechanical interlocking structures

Study on the Mechanical Properties of Bionic Coupling Layered B4C/5083Al Composite Materials

Multiscale Structural Design and Fracture Control of High-Performance Biomimetic Materials

A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures

Low-velocity impact damage of bionic turtle shell sandwich laminates with different suture shapes

Investigation of Mechanical Properties and Microstructural Evolution in Pure Copper with Dual Heterostructures Produced by Surface Mechanical Attrition Treatment

Design of bimetallic interpenetrating biomimetic structures and additive-casting synergetic manufacturing

Bio-inspired hybrid helicoidal microstructure: Balancing carrying capacity and prolonged residual load

Microstructures and Friction-Wear Characteristics of Bivalve Shells