Abstract:Hot mix asphalt (HMA) roadway repair and maintenance encompasses thousands of miles in the United States and all over the world. A better performing, longer lasting HMA pavement benefits all parties involved. Technologies to lengthen time between needed repair intervals and decrease maintenance costs are welcomed and being researched. One new technology in HMA pavements is carbon fibers. Carbon fibers, if successfully introduced into HMA pavement, may provide performance benefits and qualities to benefit intelligent transportation systems (ITS). Advancements in carbon fiber production, resulting in improved carbon fiber properties, add to the economic and performance attractiveness. Laboratory testing can be utilized as an indicator for field performance before possibly spending excess money in production. Performance predictions are made in three of HMA’s failure mechanisms which are thermal cracking, fatigue cracking, and permanent deformation. Another mechanism, reflective cracking, will also be examined although laboratory testing is not currently directly related to field performance. Field and laboratory specimens were manufactured for laboratory testing. Variations in mixture types included binder contents, binder types, and carbon fiber percentages. Results of this research are: • Asphalt binder testing (such as the dynamic shear rheometer, bending beam rheometer, and direct tensile tester) was difficult to perform due to the irregularities in test specimens caused by the carbon fiber. • Asphalt content had more influence than carbon fiber content on results in the low temperature performance utilizing the indirect tensile test. • The addition of carbon fibers at a percentage of 0.50% by mass of asphalt binder combined with a 0.1% increase in optimum asphalt binder content is economically attractive in fatigue analysis. • An economical analysis in permanent deformation data comparing a mixture with 0.50% carbon fiber by mass of asphalt binder at a 0.1% increase in optimum asphalt binder content versus a mixture with an increase in high temperature binder grade due to binder modification would be of interest.

Performance improvement of asphalt concretes using fiber reinforcement

Performance of Fiber Reinforced Asphalt Concrete under Environmental Temperature and Water Effects

Performance of Glass Wool Fibers in Asphalt Concrete Mixtures

Hemp Fiber-Modified Asphalt Concretes with Reclaimed Asphalt Pavement for Low-Traffic Roads

Modification and Enhancing Contribution of Fiber to Asphalt Binders and Their Corresponding Mixtures: A Study of Viscoelastic Properties

Evaluation and Design of Fiber-Reinforced Asphalt Mixtures

Fiber-Reinforced Asphalt Mixture Design on Anti-Skid Surfacing for Field Testing High-Speed Vehicles on Pavements

THE PAVEMENT PERFORMANCE AND LIFE-CYCLE COST IMPACTS OF CARBON FIBER MODIFIED HOT MIX ASPHALT

Mechanistic Performance of Hybrid Asphalt Concretes with Recycled Aggregates and Hemp Fiber for Low Traffic Roads

Investigating Low-Temperature Cracking Behavior of Fiber-Reinforced Asphalt Concrete Materials

Reinforcement Effect of Different Fibers on Asphalt Mastic

Study on the Road Performance and Compaction Characteristics of Fiber-Reinforced High-RAP Plant-Mixed Hot Recycled Asphalt Mixtures

Performance Experiments and Finite Element Simulation on Basalt Fiber Reinforced Asphalt Mixture

A Fundamental Study on the Macro Fiber and Hybrid Fiber Reinforced Concrete Pavement

Unraveling the influence of fibers on aging susceptibility and performance of high content polymer modified asphalt mixtures

Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance

Asphalt concrete improved by concentrated rubber latex and prevulcanized rubber latex – Performance and cost analysis

Study on Design and Pavement Performance of Rice Straw Fiber Asphalt Mixture Based on Response Surface Methodology

Reuse of carbon fiber composite materials in porous hot mix asphalt to enhance strength and durability

A COMPARATIVE STUDY OF PHYSICAL PROPERTIES USING VARIOUS GRADES ASPHALT BINDER WITH DIFFERENT TYPE OF FIBERS

Mechanistic Performance and Distress Model of Bottom Ash Modified Porous Asphalt Concretes with Various Thailand Aggregates