Abstract:Micro-electro-mechanical system (MEMS) based mass spectrometry, MEMS mass spectrometry, emerges a new technique branch of miniature mass spectrometry. One of the main challenges hindering the development of MEMS mass spectrometry is the poor compatibility between the complex electrode structure of traditional ion optics and MEMS processes. This paper proposed a planar quadrupole mass filter utilizing a highly simplified stacked-layer structure and film electrodes, which is easy to fabricate with high precision by MEMS surface micromachining. The ion trajectory simulation model of the MEMS mass spectrometry chip involving all necessary ion optics was elaborated for investigating the preliminary performance of the planar quadrupole mass filter. By optimizing the crucial parameters such as the frequency of radio frequency voltage, the ratio of direct current voltage and radio frequency voltage, pre-pole length, main-pole length, and injection kinetic energy, the preliminary simulation result of planar quadrupole mass filter achieved a 1∼2Da peak width (at 50% of peak height) and 20∼80% ion transmission efficiency. Importantly, the planar quadrupole mass filter demonstrated a maximum working pressure of 0.1 Pa (using air as the buffer gas), 100 times higher than that of conventional quadrupole mass filters, while maintaining a 0.7∼1.8 Da peak width and ∼5% ion transmission efficiency. Additionally, to modify the theoretical formulas for the non-ideal quadrupolar field of planar quadrupole mass filter, a novel approach based on stability diagrams obtained by simulation was also introduced. The pretty good linearity (R 2 =1) between ion masses in the range of 10 to 100Da and the corresponding radio frequency voltages was verified through the simulated mass spectra. Notably, the proportional coefficient of ion mass and radio frequency voltage exhibited a minimal 4% deviation between the simulated value (4.7132 V 0P /Da) and the calculated value (4.9036 V 0P /Da) through the modified formula. In conclusion, the preliminary simulation results demonstrated that the planar quadrupole mass filter possessed moderate performance, high-pressure tolerance, and excellent theoretical consistency, which proved it a promising technology of MEMS mass spectrometry. It can find applications in the fields of gas detection, including the rapid response to hazardous gas emissions and in situ detection of dissolved gases in the deep sea.

Compact, Monolithically 3-D-Printed, Hyperbolic Quadrupole Mass Filters for CubeSat Mass Spectrometry

Development of Microwave Plasma Torch Mass Quadrupole Spectrometer

Development of quadrupole mass spectrometers using rapid prototyping technology

Simulation Study of a Planar Quadrupole Mass Filter for MEMS Mass Spectrometer

A Novel Quadrupole Mass Filter Based On Rectangular Electrodes

Autonomous, Additively Manufactured, Multi-Langmuir Probe for CubeSat Plasma Diagnostics

Development of a Newly Compact Double-Focusing Mass Spectrometer

Study of a Micro Chamber Quadrupole Mass Spectrometer

Research on a miniature Mattauch-Herzog mass spectrometer designed for space exploration

A 3‐D metal printed folded‐shorted patch array with an integrated feeding circuit offering dual‐band circularly polarised radiation for cubesat applications

Compact high-Q hemispherical resonators for 3-D printed bandpass filter applications

High-Performance, Low-Cost, Additively Manufactured Electrospray Ion Sources for Mass Spectrometry

Design and Testing of a Helix Antenna Deployment System for a 1U CubeSat

CubeSat-Based Observations of Lunar Ice Water Using a 183 GHz Horn Antenna: Design and Optimization

Performance evaluation of a miniature magnetic sector mass spectrometer onboard a satellite in space

A Printed Yagi Antenna for CubeSat with Multi-Frequency Tilt Operation

Development and optimization a miniature Mattauch-Herzog mass analyzer

Inertial microfluidic mixer for biological CubeSat missions

First Proof-of-Concept Prototype of an Additive-Manufactured Radio Frequency Quadrupole

Fabrication and characterization of Fused Deposition Modeling 3D printed mm-scaled metasurface units

A Metallic 3D Printed 20 GHz Unit Cell for Satellite Communications