Abstract:Lid-driven cavity (LDC) flow is a significant area of study in fluid mechanics due to its common occurrence in engineering challenges. However, using numerical simulations (ANSYS Fluent) to accurately predict fluid flow and mixed convective heat transfer features, incorporating both a moving top wall and a heated hemispherical obstruction at the bottom, has not yet been attempted. This study aims to numerically demonstrate forced convection in a lid-driven square cavity (LDSC) with a moving top wall and a heated hemispherical obstacle at the bottom. The cavity is filled with a Newtonian fluid and subjected to a specific set of velocities (5, 10, 15, and 20 m/s) at the moving wall. The finite volume method is used to solve the governing equations using the Boussinesq approximation and the parallel flow assumption. The impact of various cavity geometries, as well as the influence of the moving top wall on fluid flow and heat transfer within the cavity, are evaluated. The results of this study indicate that the movement of the wall significantly disrupts the flow field inside the cavity, promoting excellent mixing between the flow field below the moving wall and within the cavity. The static pressure exhibits fluctuations, with the highest value observed at the top of the cavity of 1 m width (adjacent to the moving wall) and the lowest at 0.6 m. Furthermore, dynamic pressure experiences a linear increase until reaching its peak at 0.7 m, followed by a steady decrease toward the moving wall. The velocity of the internal surface fluctuates unpredictably along its length while other parameters remain relatively stable.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: accurately predict the fluid flow and mixed convective heat transfer characteristics in a square cavity with a moving top wall and a hemispherical obstacle heated at the bottom. Specifically, the research aims to show the influence of forced convection in a square cavity when the top wall is moving and there is a heated hemispherical obstacle at the bottom through numerical simulation (using ANSYS Fluent). ### Research Background and Problem Description 1. **Research Background** - Lid - driven cavity flow (LDC) is an important research area in fluid mechanics and has attracted attention due to its wide application in engineering challenges. - Although many studies have explored lid - driven cavity flows under different shapes and conditions, the mixed convective heat transfer characteristics combining a moving top wall and a heated hemispherical obstacle have not been fully studied. 2. **Research Problems** - **Fluid Flow and Heat Transfer Characteristics**: How to accurately predict the fluid flow and mixed convective heat transfer characteristics in a square cavity with a moving top wall and a hemispherical obstacle heated at the bottom? - **Influence of Geometric Structure**: What are the influences of different cavity geometric structures and the moving top wall on fluid flow and heat transfer? - **Influence of Parameters**: What are the influences of different wall velocities (5, 10, 15, and 20 m/s) on fluid flow and heat transfer characteristics? ### Mathematical Model and Assumptions - **Governing Equations** - Mass Conservation Equation: \[ \frac{\partial u}{\partial x}+\frac{\partial v}{\partial y} = 0 \] - Momentum Conservation Equation (x - direction): \[ \rho\left(u\frac{\partial u}{\partial x}+v\frac{\partial u}{\partial y}\right)=-\frac{\partial p}{\partial x}+\mu\left(\frac{\partial^{2}u}{\partial x^{2}}+\frac{\partial^{2}u}{\partial y^{2}}\right)+\rho\beta(T - T_0)g_x \] - Momentum Conservation Equation (y - direction): \[ \rho\left(u\frac{\partial v}{\partial x}+v\frac{\partial v}{\partial y}\right)=-\frac{\partial p}{\partial y}+\mu\left(\frac{\partial^{2}v}{\partial x^{2}}+\frac{\partial^{2}v}{\partial y^{2}}\right)+\rho\beta(T - T_0)g_y \] - Energy Conservation Equation: \[ \rho c_p\left(u\frac{\partial T}{\partial x}+v\frac{\partial T}{\partial y}\right)=k\left(\frac{\partial^{2}T}{\partial x^{2}}+\frac{\partial^{2}T}{\partial y^{2}}\right) \] - **Assumptions** - The flow is considered to be two - dimensional, steady, incompressible and laminar. - Internal heat generation and radiative heat transfer are ignored. - Thermophysical properties remain constant, but density changes are considered in the buoyancy term (Boussinesq approximation). ### Research Significance Accurately predicting the fluid flow and mixed convective heat transfer characteristics in a square cavity with a moving top wall and a heated hemispherical obstacle is important for design and...

Investigation of Thermo-Hydraulics in a Lid-Driven Square Cavity with a Heated Hemispherical Obstacle at the Bottom

Periodic Fluid Flow And Heat Transfer In A Square Cavity Due To An Insulated Or Isothermal Rotating Rectangular Object

Magnetohydrodynamics Mixed Convection in a Lid-Driven Cavity Having a Corrugated Bottom Wall and Filled With a Non-Newtonian Power-Law Fluid Under the Influence of an Inclined Magnetic Field

A Numerical Study of Lid Driven Cavity with Mixed Convection

MHD mixed convection non-isothermal flow and heat transfer analysis of non-Newtonian fluid saturated in I-shaped cavity

Mixed Convection in a Double Lid-Driven Cavity Filled with Hybrid Nanofluid by Using Finite Volume Method

CFD simulations of MHD effects on mixed convectional flow in a lid-driven square cavity with square cylinder using Casson fluid

Computational Study of Rarefied Gas Flow and Heat Transfer in Lid-driven Cylindrical Cavities

Fluid motion in a cavity driven by a four-sided moving lid with uniform velocity

DOUBLE-DIFFUSIVE MIXED CONVECTION IN A LID-DRIVEN ENCLOSURE FILLED WITH A FLUID-SATURATED POROUS MEDIUM

Experimental and Numerical Investigation on the Cavity Regime and Drag Reduction of Ventilated Partial Cavity

Investigation of Mixed Convection in a Cylindrical Lid Driven Cavity Filled with Water-Cu Nanofluid

Impact of two-phase hybrid nanofluid approach on mixed convection inside wavy lid-driven cavity having localized solid block

Numerical simulation of magnetohydrodynamics double-diffusive natural convection in a cavity with non-uniform heated walls

Conjugate-mixed Convection Heat Transfer in a Lid-Driven Enclosure with Thick Bottom Wall

Fluid-structure interaction analysis of transient convection heat transfer in a cavity containing inner solid cylinder and flexible right wall

Numerical investigation of multiphase flow effects on mixed convection in partially heated hybrid nanofluid-filled cavity

MHD Natural Convection and Thermal Control Inside a Cavity with Obstacles under the Radiation Effects

Analysis of unsteady mixed convection of Cu–water nanofluid in an oscillatory, lid-driven enclosure using lattice Boltzmann method

Characterizing Natural Convection and Thermal Behavior in a Square Cavity with Curvilinear Corners and Central Circular Obstacles

A Numerical Investigation of the Free Flow in a Square Porous Cavity with Non-Uniform Heating on the Lower Wall