Abstract:Transactions of the Institute of Measurement and Control, Ahead of Print. Accurate dynamic parameters are essential for precise control of model-based manipulators. Due to the direct connection between the joint axis and the motor rotor of the direct drive manipulator, using additional joints would increase the disturbance of the system, leading to substantial trajectory tracking errors, which could potentially harm the manipulator if the tracking error exceeds the limited position of joints, and it also curtails the comprehensive parameter excitation and affects the identification accuracy. Restricting joint movement to a narrow area can prevent this injury, but it also curtails the comprehensive parameter excitation and affects the identification accuracy. To address these challenges, this paper presents a novel method for identifying dynamic parameters of multiple degree-of-freedom (DOF) series direct drive manipulators. Specifically, an open-loop gravity torque compensation strategy with spatial geometric characteristics is introduced to ensure secure operation during manipulator identification processes. Meanwhile, an improved model reference adaptive identification (MRAI) method is presented to estimate the nominal inertia quickly and accurately. Finally, a disturbance observer (DOB) based on minimum model perturbation bound is proposed to compensate for significant variations in model disturbances, enabling stable and precise tracking of planned exciting trajectories. This proves advantageous for fully exciting dynamic parameters and improving identification accuracy. Simulation experiments demonstrate that the tracking error of each joint's exciting trajectory is within 0.07 radians, and the maximum absolute error of identifying dynamic parameters is 0.099169409, which verifies the feasibility and effectiveness of the proposed method.

Identification and high-precision trajectory tracking control for space robotic manipulator

Adaptive Control of Mini Space Robot Based on Linear Separation of Inertial Parameters

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Robust Control for Spacecraft Attitude Tracking under Multiple Physical Limitations with Guaranteed Performance

Direction and Trajectory Tracking Control for Nonholonomic Spherical Robot by Combining Sliding Mode Controller and Model Prediction Controller

Finite-time Extended State Observer Based Prescribed Performance Fault Tolerance Control for Spacecraft Proximity Operations

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

SE(3) Based LTV-MPC Algorithm for Multi-Obstacle Trajectory Tracking of Fully Driven Spacecraft

Optimal design of model predictive controller based on transient search optimization applied to robotic manipulators

Fast and Accurate Motion Tracking of a Linear Motor System under Kinematic and Dynamic Constraints: an Integrated Planning and Control Approach

Trajectory Tracking Control for Robot Manipulator Under Dynamic Environment.

A Variable Parameter Method Based on Linear Extended State Observer for Position Tracking

Practical Prescribed Tracking Control of n-DOF Robotic Manipulator with Uncertainties via Friction Compensation Approach

A Simple Method Of Tip Trajectory Control For The Flexible Multi-Link Manipulator With Uncertain Parameters

Robust Observer-based Trajectory Tracking Control for Unmanned Aerial Manipulator

A novel dynamic parameter identification method for the multi-degrees-of-freedom series direct drive manipulator

An improve nonlinear robust control approach for robotic manipulators with PSO-based global optimization strategy

Enhanced Robust Motion Control based on Unknown System Dynamics Estimator for Robot Manipulators

Model-free Adaptive Trajectory Tracking Control of Robotic Manipulators with Practical Prescribed-Time Performance

Robust Precision Position Tracking of Planar Motors Using Min-Max Model Predictive Control