Abstract:This paper studies the distribution characteristics of the current in situ stress field in northeast Yunnan Province by using multisource stress data, including in situ stress measurements, focal mechanism solutions, and borehole damage information, and comprehensively determines the in situ stress magnitude and direction in the mining area. Based on the borehole ultrasonic imaging test results, a new method using borehole breakouts and drilling‐induced fractures was proposed to determine the stress direction, and a statistical analysis was conducted on the dip direction, dip angle, and line density of structural planes. Through rock mechanics experiments, the evolution of rock mechanical properties with depth was studied, and the influences of rock mass structure and rock mechanical properties on in situ stress were explored. The Maoping lead–zinc mining area is a significant metal mine site in northeastern Yunnan. In this study, both hydraulic fracturing in situ stress testing and ultrasonic imaging logging were first carried out in the mining area. Second, 930 focal mechanism solutions and 231 sets of stress data near the mining area were collected. Then, the variations in the type of in situ stress field, the magnitude of in situ stress, the direction of horizontal principal stress, and the ratio of lateral pressure were analyzed to characterize the distribution of the in situ stress field. On this basis, a new method using borehole breakouts and drilling‐induced fractures was proposed to determine the stress direction. Finally, the evolution of the mechanical properties of dolomite with burial depth was analyzed and the influence of rock mechanical properties on the distributions of the in situ stress field was explored. The results show that the in situ stress in the mining area is σH > σV > σh, indicating a strike–slip stress state. The in situ stress is high in magnitude, and its value increases with burial depth. The maximum and minimum horizontal lateral stress coefficients are stabilized at approximately 1.22 and 0.73, respectively. The direction of the maximum horizontal principal stress is NW, mainly ranging from N58.44° W to N59.70° W. The stress field inferred from the focal mechanism solution is in good agreement with the test results. The proportion of structural planes with dip angles between 30° and 75° exceeds 80%, and the dip direction of the structural planes is mainly NW to NWW. The line density of structural planes shows high density in shallow areas and low density in deep areas. More energy tends to be accumulated in rocks with higher elastic modulus and strength, leading to higher in situ stress levels. These findings are of significant reference for mine tunnel layout, support design optimization, and disaster prevention.

Depth–Strength In-Situ Stress Model for Granite in Southeastern Tibetan Plateau and Its Implications for Stress Estimation in the Upper Crust

Stress modeling for the upper and lower crust along the Anninghe, Xianshuihe, and Longmenshan Faults in southeastern Tibetan plateau

Focal Mechanism and Stress Field in the Northeastern Tibetan Plateau: Insight into Layered Crustal Deformations

A comprehensive study on in situ stress field characteristics and changes in rock mechanical properties in deep mines in northeastern Yunnan, China

Triaxial Compressive Strength, Failure, and Rockburst Potential of Granite Under High-Stress and Ground-Temperature Coupled Conditions

Grain-based Coupled Thermo-Mechanical Modeling for Stressed Heterogeneous Granite under Thermal Shock

Studies on Stress-Strain Features of Structured Granite Residual Soil

Numerical Study on the Influence of Fault Structure on the Geostress Field

Study on the Accuracy of Fracture Criteria in Predicting Fracture Characteristics of Granite with Different Occurrence Depths

Stress heterogeneity in the eastern Tibetan Plateau and implications for the present-day plateau expansion

Regional Stress Field in the Se Margin of the Tibetan Plateau Revealed by the Focal Mechanisms of Small and Moderate Earthquakes

Strain-softening model for granite and sandstone based on experimental and discrete element methods

Investigation of the Deterioration of Basu Granite Mechanical Properties Caused by Freeze–Thaw Cycles in High-Altitude Mountains in the Eastern Part of the Tibetan Plateau, China

Experimental and meso-scale numerical modeling of splitting tensile behavior of weathered granites from South China

Characteristics and geological significance of the stress state of the lithosphere in the Qinghai-Tibetan Plateau and its neighboring areas

Spatial variation in the present-day stress field and tectonic regime of Northeast Tibet from moment tensor solutions of local earthquake data

A coupled strain softening and hardening model for completely weathered granite in a fault zone

An Experimental Investigation on the Characteristics of Excavation‐Induced Failure of Rocks Surrounding a Shaft

Disturbed granite identification by integrating rock mass geophysical properties

Study on shear characteristics and a mechanics model of granite residual soil–rock interface

A model for characterization of crack closure stage in stress–strain curves of Suizhou granite after exposure to various thermal shocks