[Problems associated with left-sided cardiac valve replacement in children].

E. Deviri,M. Levy

1988-02-01

Abstract:

What problem does this paper attempt to address?

Broadening the Dielectric Stability Temperature Range of BNBST Relaxor Ferroelectric Ceramics by Rare Earth Ce Doping for Energy Storage

Zhu Wen,Deng Wei,Li Zhipeng,Shen Zong-Yang,Shi Xuhai,Song Fusheng,Luo Wenqin,Wang Zhumei,Li Yueming

DOI: https://doi.org/10.1007/s10854-022-09351-x

2022-01-01

Journal of Materials Science Materials in Electronics

Abstract:(Bi0.5Na0.5)0.65(Ba0.3Sr0.7)0.35Ti1-XCeXO3 (abbreviated as BNBSTC100x, x = 0, 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08) ceramics were prepared by a solid-state reaction method. The effect of rare earth Ce-doping content on the phase structure, microstructure, dielectric properties and energy storage characteristics of ceramics was investigated. All BNBSTC100x ceramics had a single pseudocubic perovskite structure with high bulk density. With the increase of Ce-doping content, the dielectric peak of BNBSTC100x ceramics was gradually suppressed and flattened, which effectively broadened the dielectric stability temperature range. Meanwhile, the P-E hysteresis loop of the ceramics gradually changed to slim with Ce content, and the optimized energy storage properties were achieved in BNBSTC4 ceramics with recoverable energy storage density Wrec = 1.15 J/cm3 and efficiency η = 81% under a relatively low electric field of 100 kV/cm. Furthermore, the BNBSTC4 ceramics also exhibited good temperature, frequency and fatigue cycle stability, which should be a good candidate ceramic material for pulse power capacitors used in a wider temperature range.
Enhanced strain and electrostrictive properties in lead-free BNT-based ceramics via rare earth doping

Anping Deng,Jiagang Wu

DOI: https://doi.org/10.1016/j.jmat.2021.08.002

IF: 8.589

2022-03-01

Journal of Materiomics

Abstract:Rare earth ions were used to optimize the strain and electrostrictive properties of BNT-based ceramics.High strain of ∼0.42% and large d33* of >600 pm/V were obtained for La3+ doped ceramic with nonergodic relaxor state.Large Q33 of ∼0.047 m4/C2 was obtained for La3+-doped ceramic with ergodic relaxor state.Bi0.5Na0.5TiO3 (BNT)-based ceramics are one of the most promising lead-free ferroelectrics due to their high strain property. Compared to other chemical modifications, rare earth ions doping provides significant possibility to optimize the strain property of BNT-based ceramics. In this work, the effects of rare earth ions on phase structure, microstructure, and strain & electrostrictive properties of lead-free BNT-based ceramics were systematically investigated. Rare earth ions (i.e., La3+, Sm3+, Yb3+, Dy3+, and Nd3+) were selected as the doping ions. Introducing moderate La3+ ions can drive the ferroelectric state of BNT-based ceramics to nonergodic relaxor state or ergodic relaxor state. The enhanced strain response of ∼0.40-0.42% and high converse piezoelectric coefficient of ∼600-630 pm/V can be achieved under 60-70 kV/cm for La3+-doped ceramic with nonergodic relaxor state. Besides, the giant electrostrictive coefficient Q33 of ∼0.047 m4/C2 can be obtained for La3+-doped ceramic with ergodic relaxor state. Other rare earth ions also present the promotion effect on strain enhancement for BNT-based ceramics. This study affords a significant guidance to optimize strain and electrostrictive properties of BNT-based ceramics via rare earth ions doping.Download : Download high-res image (217KB)Download : Download full-size image

materials science, multidisciplinary,chemistry, physical,physics, applied
Origin of the ultrahigh field-induced strain in the Gd-doped 0.854Bi0.5Na0.5TiO3-0.12Bi0.5K0.5TiO3-0.026BaTiO3 ternary ceramic system

Namık Kemal Gozuacik,Sedat Alkoy

DOI: https://doi.org/10.35848/1347-4065/ad7147

IF: 1.5

2024-09-14

Japanese Journal of Applied Physics

Abstract:This study focused on analyzing the ferroelectric, piezoelectric, and dielectric properties of lead-free Bi0.487Na0.427K0.06Ba0.026TiO3 (0.854BNT-0.12BKT-0.026BT) ternary ceramic system by systematically doping 0.001, 0.01, 0.1, 0.5, and 1.0 mol% Gd2O3. The specific composition that was investigated is located at the tetragonal side of the rhombohedral-tetragonal morphotropic phase boundary (MPB) region. Undoped and Gd-doped BNT-BKT-BT ceramics were produced by the conventional solid-state reaction method. Ferroelectric, piezoelectric, and dielectric properties of ceramics were analyzed by carrying out electrical measurements from sintered samples. An ultrahigh field-induced unipolar strain of 0.52% at 65 kV cm−1, with a converse piezoelectric coefficient d33* of up to 795 pm V−1, was achieved with 0.5 mol% Gd doping. This was attributed to the Gd dopant disrupting the normal ferroelectric order and leading to the formation of a nonpolar relaxor phase. The field-induced transition from the nonpolar relaxor phase to the normal ferroelectric phase resulted in relatively large field-induced strain values in the 0.5 mol% Gd-doped ceramics. These results suggest that Gd-doped BNT-BKT-BT ceramics hold promise for digital actuator applications.

physics, applied
Synthetic phospholipids as substrates for phospholipase C from Bacillus cereus.

U. Ries,E. Fleer,C. Unger,H. Eibl

DOI: https://doi.org/10.1016/0005-2760(92)90041-S

1992-04-23

Biochimica et Biophysica Acta

Abstract:
Preparation and Properties of Nd-doped BCTH Lead-Free Ceramics by Solid-Phase Twin Crystal Method

Xiyue He,Bijun Fang,Shuai Zhang,Xiaolong Lu,Jianning Ding

DOI: https://doi.org/10.1016/j.cap.2022.03.005

IF: 2.856

2022-01-01

Current Applied Physics

Abstract:0.5 mol% Nd-doped (Ba0.85Ca0.15)(Ti0.9Hf0.1)O-3 (BCTH-Nd) lead-free ceramics were prepared by a solid-phase twin crystal method, where the effects of sintering condition on structure, electrical and optical properties were studied. All the sintered BCTH-Nd ceramics exhibit pure perovskite structure, dense microstructure with several micron grain size, which tends to increase with elevating sintering temperature. All synthesized ceramics have complex dielectric behavior, which presents normal ferroelectrics characteristic with slight dispersion phenomenon. The BCTH-Nd ceramics exhibit excellent piezoelectric and ferroelectric properties and acceptable dielectric performance when sintered at 1480 degrees C for 2 h. Under 269 nm light excitation, several fluorescent emission peaks are excited with a whole indigo fluorescence, where the strongest emission peak is emitted at 473 nm, corresponding to the (4)G(3/2) -> I-4(9/2) energy level transition of Nd3+. Multifunctional performance is fulfilled in the lead-free BCTH ceramics via rare earth doping, which can broaden the application fields of piezoelectric-based materials.
Large electrostrain and high energy-storage of (1-x)[0.94(Bi0.5Na0.5) TiO3-0.06BaTiO3]-xBa(Sn0.70Nb0.24)O3 lead-free ceramics

Yuxin Jia,Huiqing Fan,Han Wang,Arun Kumar Yadav,Benben Yan,Mengyuan Li,Qifeng Quan,Guangzhi Dong,Weijia Wang,Qiang Li

DOI: https://doi.org/10.1016/j.ceramint.2021.03.172

IF: 5.532

2021-07-01

Ceramics International

Abstract:(1-x)[0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3]-xBa(Sn0.70Nb0.24)O3 (abbreviated as BNTBT-100xBSN) lead-free ceramics were fabricated with a relative density greater than 96 %, and the structure as well as performance were tested. BNTBT-100xBSN ceramics are pseudo-cubic perovskite structure, with dense surface morphology. Doping BSN can effectively reduce the dielectric loss of ceramics and increase the relaxation properties to a certain extent. The randomly distributed ferroelectric phase was replaced by polar nano regions, thereby improving the electro-strain and energy storage performance of the system. The largest electro-strain and the corresponding normalized strain (d 33 *) reach ~ 0.43 % and 633 pm/V respectively in the BNTBT-1BSN ceramic. The largest effective energy storage density reaching ~ 1.28 J/cm3 was tested in BNTBT-2BSN. BNTBT-100xBSN ceramics provide a feasible idea for the systematic research of lead-free ferroelectrics and improvements in electro-strain and energy storage applications.

materials science, ceramics
(Na0.8-K0.2Li )0.5Bi0.5Ti0.985Ta0.015O3 lead-free ceramics with large strain and high recoverable energy density

Han Wang,Qiang Li,Yuxin Jia,Arun Kumar Yadav,Benben Yan,Mengyuan Li,Qi Shen,Qifeng Quan,Weijia Wang,Guangzhi Dong,Huiqing Fan,Han Wang,Qiang Li,Yuxin Jia,Arun Kumar Yadav,Benben Yan,Mengyuan Li,Qi Shen,Qifeng Quan,Weijia Wang,Guangzhi Dong,Huiqing Fan

DOI: https://doi.org/10.1016/j.jallcom.2021.160378

IF: 6.2

2021-10-01

Journal of Alloys and Compounds

Abstract:The conventional solid reaction was used to synthesize (Na0.8-x K0.2Li x )0.5Bi0.5Ti0.985Ta0.015O3 (abbreviated as BNKTT-100xLi) lead-free perovskite ceramics. The influences of Li+ ion doping for the relaxation mechanism and piezoelectric performances of all ceramics were systematically investigated. All ceramics exhibited a single perovskite structure, accompanied with a dense surface morphology and uniform element distributions. AC impedance spectroscopy showed the single grain conduction mechanism for all samples. The maximum bipolar strain (S = 0.462%) and unipolar strain (S u = 0.443%) for x = 0.025 sample were obtained under 80 kV/cm, and its unipolar strain achieved 0.573% at 100 °C. BNKTT-15Li ceramic exhibited outstanding energy storage performance with a recoverable energy density of 1.29 J/cm3 under applied 130 kV/cm field. It suggested that the excellent electro-strain and energy-storage properties for BNKTT-100xLi ceramics could be widely applicable to electronic equipment.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Achieving giant field-induced strain in BS-modified BNKT lead-free ferroelectric ceramics

Chang Liu,Min Li,Tianyang Zheng,Tao Zhang,Chongguang Lyu,Yunfei Liu,Yinong Lyu

DOI: https://doi.org/10.1016/j.sna.2024.115205

IF: 4.291

2024-02-25

Sensors and Actuators A Physical

Abstract:Bi 0.5 Na 0.5 TiO 3 -Bi 0.5 K 0.5 TiO 3 (BNT-BKT) binary systems with the morphotropic phase boundary (MPB) are promising candidates for piezoelectric actuators. However, pure BNT-BKT ceramics commonly exhibit unfavorable electric field-induced strain, which is insufficient to meet the requirements for actuator applications. Rare earth-containing dopants have been extensively explored to modify various materials due to their unique optical, magnetic, and electronic properties. Here, by introducing rare earth ion-containing dopants BiScO 3 (BS), the electrical properties of Bi 0.5 (Na 0.84 K 0.16 ) 0.5 TiO 3 (BNKT) lead-free ferroelectric ceramics have been modified. X-ray diffraction (XRD) and scanning electron microscopy (SEM) results suggest that the introduction of BS results in an increase in tetragonal (T) phases, reduced grain sizes, and uniform morphologies. Ferroelectric measurements demonstrate that the BS-containing ceramics show slimmer hysteresis loops. The BNKT-2BS ceramics show a noteworthy improvement in electric field-induced strain, with bipolar and monopolar strains of 0.58% and 0.68%, respectively, which are almost 4 times and 6 times higher than those of pure BNKT ceramics. Furthermore, the corresponding normalized strain ( d 33 *) also achieves high values of 967 pm/V and 1133 pm/V, respectively. Temperature-dependent dielectric measurements reveal that BS-containing ceramics exhibit good relaxor characteristics with frequency dispersion and diffuse phase transitions. This study presents a sufficient and feasible strategy for the optimization of strain performance in large displacement actuator applications.

engineering, electrical & electronic,instruments & instrumentation
Giant electric field-induced strain and structure evolution of NaTaO3-modified 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 Pb-free ceramics

Gang Liu,Huanghui Nie,Leiyang Zhang,Xinyu Zeng,Yazhong Zheng,Xinyu Chen,Xinran Wang,Kun Yu,Li Jin,Yan Yan

DOI: https://doi.org/10.1016/j.ceramint.2023.03.162

IF: 5.532

2023-03-01

Ceramics International

Abstract:To acquire giant electric field-induced strain in non-Pb materials is attracting a great deal of attention in the past decade. In the current investigation, the crystal and domain structures as well as the electrical performances of (1-x) (0.94Bi0.5Na0.5TiO3-0.06BaTiO3)-xNaTaO3 (BNBT-xNT) specimens were systematically studied to achieve enhanced strain. The introduction of NT makes the phase structure transit from rhombohedral-tetragonal to pseudo-cubic structure. The original domain structure of BNBT is destroyed, and the disorder degree of the local structure increases. Simultaneously, the remnant polarization, coercive field, and piezoelectric coefficients were significantly decreased. The transition from ferroelectric to ergodic relaxation can be effectively modified, thus lowering the transition zone to room temperature. Finally, the BNBT-3NT ceramics achieve marked strain coefficients at room temperature, with a maximum strain of 0.394% under 65 kV/cm and a d 33* of 606 pm/V.

materials science, ceramics
Electric Field-Induced Giant Strain and Piezoelectricity Enhancement Effect in (bi1/2na1/2)0.935+xba0.065ti1−x(pr1/2nb1/2)xo3 Lead-Free Ceramics

Chunmei Wang,Zhijun Xu,Renfei Cheng,Ruiqing Chu,Jigong Hao,Wei Li,Huaiyong Li,Juan Du,Guorong Li

DOI: https://doi.org/10.1016/j.ceramint.2015.11.114

IF: 5.532

2016-01-01

Ceramics International

Abstract:Lead-free (Bi1/2Na1/2)0.935+xBa0.065Ti1−x(Pr1/2Nb1/2)xO3 (BNBT–x PN) piezoelectric ceramics were prepared by the conventional solid-state reaction method and the crystal structure and electrical properties were systematically investigated. X-ray diffraction patterns revealed that the (Pr1/2Nb1/2)4+ completely diffused in the BNBT lattice in the studied composition range. An appropriate amount of (Pr1/2Nb1/2)4+ additive enhanced the dielectric, ferroelectric, and piezoelectric properties of BNBT ceramics. The Pr and d33 increased from 29.1μC/cm2 and 121pC/N of pure BNT to 32.8μC /cm2 and 221 pC/N of modified ceramics with x=0.0050, respectively. Furthermore, electric field-induced strain was enhanced to its maximum value (Smax=0.34%) with normalized strain (d33*=Smax/Emax=567pm/V) at an applied electric field of 60kV/cm for x=0.0075. These findings have great potential for actuator and multifunctional device applications, which may also open up a range of new applications.
Fatigue of unknown aetiology--a review.

Anthony Valdini

DOI: https://doi.org/10.1093/FAMPRA/2.1.48

1985-03-01

Family Practice

Abstract:The patient complaining of fatigue presents the physician with the dilemma of distinguishing a psychological disorder from a physical illness in its early stage. Information relating this nonspecific complaint to specific diagnoses is scarce. Consequently, laboratory investigation of fatigue has been empirical. Five separate reports of patients with fatigue (n = 940) are reviewed. 'Psychologic' causes accounted for 57% of cases. Of the 36.7% of cases with 'physical' causes, infection represented the largest group followed by cardiovascular and endocrine abnormalities. In these reports, the cases of cancer and connective tissue disease was remarkably few (1% each). Duration of fatigue and patient age may be important clues to the underlying diagnosis. Appropriate laboratory investigations and suitable areas for future research are suggested.
Enhanced low‐field energy storage performance in Nd3+‐doped (Bi0.40K0.2Na0.2Sr0.2)TiO3 high‐entropy ceramics

Jiawei Lin,Tianyu Liu,Dongdong Meng,Qiang He,Wenhui Ye,Jinxu Ma,Kepi Chen

DOI: https://doi.org/10.1111/jace.20156

IF: 4.186

2024-10-03

Journal of the American Ceramic Society

Abstract:The burgeoning requirement for compact electronic devices has intensified research into lead‐free dielectric ceramics that offer superior recoverable energy storage density and efficiency at low electric fields. In this study, we report the synthesis of Nd3+‐doped (Bi0.4K0.2Na0.2Sr0.2)TiO3 perovskite ceramics via the solid‐state reaction technique. The synthesized ceramics adopted a tetragonal crystal structure. As the concentration of Nd3+ ions increased, both the maximum dielectric constant (εm) and its corresponding temperature (Tm) decrease. The incorporation of Nd3+ ions perturbed the long‐range ferroelectric order, leading to diminished maximum polarization (Pm) and remanent polarization (Pr). The ceramics achieved optimal properties with 12 mol% Nd3+ doping, showcasing a significant recoverable energy storage density of 1.50 J/cm3 at a low electric field of 140 kV/cm, along with an exceptional storage efficiency of 94.6%. This research not only highlights a promising candidate for dielectric materials in low electric field applications but also introduces an innovative approach to enhance energy storage performance.

materials science, ceramics
Enhancement of Electro-Strain Performance of KTaO3 Modified 0.94Bi0.5na0.5tio3-0.06Batio3 Ceramics

Xinran Wang,Huanghui Nie,Yan,Gang Liu

DOI: https://doi.org/10.1142/s2010135x2250014x

2022-01-01

Journal of Advanced Dielectrics

Abstract:The (1−[Formula: see text])(0.94Bi[Formula: see text]Na[Formula: see text]TiO3–0.06BaTiO 3)–[Formula: see text]KTaO3(BNBT–[Formula: see text]KT) lead-free ferroelectric ceramics were produced using the traditional solid-state sintering technique, and the phase structure, surface morphology, electrical properties were all thoroughly examined. Every ceramic has a single perovskite structure and there is no second phase, as shown by the XRD patterns and Raman spectra. Scanning electron microscopy revealed that all samples displayed dense microstructure and cubic grain. In addition, KT encourages grain growth due to the oxygen vacancies induced by doping or volatilization of ions at high temperatures. The [Formula: see text][Formula: see text]of the ceramics decreases with increasing doping levels due to oxygen vacancies acting as dipoles upon the addition of KT, and the dielectric loss of all samples is low at ambient temperature. In comparison to the pure BNBT ceramic’s bipolar strain value of 0.12%, the BNBT–2KT ceramic achieved a maximum bipolar strain of [Formula: see text]0.506% and unipolar strain of [Formula: see text] 0.430% with the corresponding [Formula: see text][Formula: see text]*up to 538 pm/V under 80 kV/cm field. Performance significantly improved as a result of this. A test of the correlation between temperature and ferroelectric properties shows that the largest strain value of the BNBT–2KT ceramic occurs at ambient temperature and that the phase change from ferroelectric to relaxor is complete. Additionally, it is discovered that the BNBT–3KT ceramic can sustain a stable strain across a broad temperature range, suggesting that it has good temperature stability. The aforementioned findings demonstrate that lead-based ceramics may be replaced with BNBT–[Formula: see text]KT ceramics.
Dielectric, Ferroelectric and Field-Induced Strain Response of Lead-Free (fe, Sb)-modified (bi0.5na0.5)0.935ba0.065tio3 Ceramics

Liangliang Li,Jigong Hao,Ruiqing Chu,Zhijun Xu,Wei Li,Juan Du,Peng Fu

DOI: https://doi.org/10.1016/j.ceramint.2016.02.168

IF: 5.532

2016-01-01

Ceramics International

Abstract:Lead-free piezoelectric ceramics (Bi0.5Na0.5)0.935Ba0.065Ti1−x(Fe0.5Sb0.5)xO3 (BNBT6.5–xFS, x=0.005, 0.010, 0.015, 0.020) were prepared by a conventional solid sintering technique. The effects of B-site doping of (Fe, Sb) on the phase structure, microstructure, dielectric, ferroelectric, and piezoelectric properties of BNBT6.5 ceramics were systematically investigated. Results showed that (Fe, Sb) can completely diffuse in the BNBT6.5 lattice in the all studied components. The addition of (Fe, Sb) destroyed the ferroelectric long-range order, and thus promoted the electric field induced strain response. The maximum electric field-induced strain (Smax=0.37%) with normalized strain (d33*=Smax/Emax=454pm/V) at an applied electric field of 80kV/cm was obtained at x=0.015. Temperature dependent measurements of both polarization and strain from room temperature to 120°C suggested that the origin of the large strain is due to a reversible field-induced ergodic relaxor to ferroelectric phase transformation.
Dielectric and energy storage properties of ternary doped barium titanate-based ceramics

Hailin Zhang,Youya Ke,Haochen Duan,Lian Deng,Huanfu Zhou,Xiuli Chen

DOI: https://doi.org/10.1007/s10854-024-13928-z

2024-12-06

Journal of Materials Science Materials in Electronics

Abstract:In this study, lead-free ceramics (1− x )[0.90BaTiO 3 –0.10Bi(Mg 1/2 Ti 1/2 )O 3 ]– x (Na 0.5 Bi 0.5 ) 0.7 Sr 0.3 TiO 3 (abbreviated as (1− x )(BT-BMT)– x BNST, x = 0.00, 0.05, 0.10, 0.15, and 0.20) were prepared using the solid-phase reaction method. The effect of (Na 0.5 Bi 0.5 ) 0.7 Sr 0.3 TiO 3 (BNST) doping on the dielectric and energy-storage properties of 0.90BaTiO 3 –0.10Bi(Mg 1/2 Ti 1/2 )O 3 (BT-BMT) ceramics was investigated. The maximum polarization strength ( P max ) was obtained when x = 0.15 at a breakdown field ( E b ) of 480 kV/cm, and the optimal energy-storage performance was W rec = 4.25 J/cm 3 and η = 87.49%. Excellent stability in both frequency and temperature was observed in the frequency conversion range of 1–120 Hz and variable temperature test from 30 to 140 °C. Moreover, the BT-BMT–0.15BNST energy-storage ceramics with rapid discharge ( t 0.9 = 4 ~ 47 ns), high power density ( P D = 155.2 MW/cm 3 ), and stable performance have great potential in pulse capacitors. In this study, we successfully developed ternary-doped energy-storage ceramics with outstanding energy-storage capabilities in BNT matrices. We comprehensively examined their crystal structures, microstates, and energy-storage properties. These insights offer new perspectives for research in the field of lead-free barium titanate-based ceramics.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Enhancement of electro-strain performance of KTaO3 modified 0.94BiNaTiO3-0.06BaTiO3 ceramics

Xinran Wang,Huanghui Nie,Yan Yan,Gang Liu

DOI: https://doi.org/10.1142/S2010135X2250014X

2022-01-01

Journal of Advanced Dielectrics

Abstract:The (1−[Formula: see text])(0.94Bi[Formula: see text]Na[Formula: see text]TiO3–0.06BaTiO 3)–[Formula: see text]KTaO3(BNBT–[Formula: see text]KT) lead-free ferroelectric ceramics were produced using the traditional solid-state sintering technique, and the phase structure, surface morphology, electrical properties were all thoroughly examined. Every ceramic has a single perovskite structure and there is no second phase, as shown by the XRD patterns and Raman spectra. Scanning electron microscopy revealed that all samples displayed dense microstructure and cubic grain. In addition, KT encourages grain growth due to the oxygen vacancies induced by doping or volatilization of ions at high temperatures. The [Formula: see text][Formula: see text]of the ceramics decreases with increasing doping levels due to oxygen vacancies acting as dipoles upon the addition of KT, and the dielectric loss of all samples is low at ambient temperature. In comparison to the pure BNBT ceramic’s bipolar strain value of 0.12%, the BNBT–2KT ceramic achieved a maximum bipolar strain of [Formula: see text]0.506% and unipolar strain of [Formula: see text] 0.430% with the corresponding [Formula: see text][Formula: see text]*up to 538 pm/V under 80 kV/cm field. Performance significantly improved as a result of this. A test of the correlation between temperature and ferroelectric properties shows that the largest strain value of the BNBT–2KT ceramic occurs at ambient temperature and that the phase change from ferroelectric to relaxor is complete. Additionally, it is discovered that the BNBT–3KT ceramic can sustain a stable strain across a broad temperature range, suggesting that it has good temperature stability. The aforementioned findings demonstrate that lead-based ceramics may be replaced with BNBT–[Formula: see text]KT ceramics.
Ferroelectric properties and large electric field-induced strain of Eu3+-doped Na0.5Bi0.5TiO3-BaTiO3 lead-free ceramics

Na Wu,Dongfang Pang,Tongxiang Liang,Xiang He

DOI: https://doi.org/10.1016/j.ceramint.2022.04.343

IF: 5.532

2022-01-01

Ceramics International

Abstract:Eu3+-doped lead-free piezoelectric ceramics, 0.937Na0.5Bi0.5_xEuxTiO3-0.063BaTiO3 (abbreviated as NBExT-BT, where x = 0, 0.003, 0.005, 0.01, 0.013, 0.015, 0.017, and 0.02), were synthesized using a conventional solidstate synthesis method. All the component samples were crystallized in a pure perovskite structure without a secondary phase. The introduction of Eu3+ caused the evident variation of the dielectric, ferroelectric and luminescence properties. The remanent polarization and coercive field of the pure NBT-BT are Pr -29.24 mu C/ cm2, Ec-39.33 kV/cm, respectively. The maximum of the remanent polarization Pr of -38.02 mu C/cm2 at room temperature and the highest dielectric constant of 6899 with a frequency of 1 kHz were obtained for NBE0.003TBT. The maximum bipolar strain Smax of -0.91% and the minimum of coercive field Ec -18.45 kV/cm were achieved by the NBE0.015T-BT, resulting from the formation of a double hysteresis loop. For all the components, Eu3+ doping stabilized the antiferroelectric phenomenon at high temperature. Furthermore, the polarized NBE0.015T-BT had the strongest fluorescence luminescence intensity as well as a fluorescence lifetime reaching 785.98 mu s.
The effect of rare-earth oxides on the energy storage performances in BaTiO3 based ceramics

Qinghuan Huang,Feng Si,Bin Tang

DOI: https://doi.org/10.1016/j.ceramint.2022.02.299

IF: 5.532

2022-06-01

Ceramics International

Abstract:In this work, 0.7BaTiO3-0.3Sr0.2Bi0.7TiO3 (0.7BT-0.3SBT) ceramics with 0.15 mol% various rare-earth oxides doped are designed and synthesized by the conventional solid-state route. All prepared samples exhibited a single perovskite phase and dense microstructure with fine grain size (0.2–0.5 μm) after sintering at 1180 °C. Especially, the Gd-doped 0.7BT-0.3SBT ceramics exhibited excellent energy storage performances; the corresponding recoverable energy density and efficiency were 3.2 J/cm3 and 91.5% under an electric field of 330 kV/cm, respectively. Meanwhile, doping with Gd caused the BT-based ceramics to possess excellent temperature (30–150 °C) and outstanding frequency stabilities (10–1000 Hz). Moreover, the pulsed charge-discharge experiments revealed that a high power density of 59 MW/cm3 and a fast discharge speed of 110 ns with outstanding temperature stability could be synchronously obtained in the Gd-doped composition. All these features are attractive for pulsed power applications.

materials science, ceramics
Improved dielectric temperature stability and energy storage properties of BNT-BKT-based lead-free ceramics

Han-li Lian,Xin-juan Liang,Meng Shi,Li-na Liu,Xiao-ming Chen

DOI: https://doi.org/10.1016/j.ceramint.2023.11.246

IF: 5.532

2023-12-21

Ceramics International

Abstract:The lead-free ceramics (1-x)(0.84Bi 0.5 Na 0.5 TiO 3 -0.16Bi 0.5 K 0.5 TiO 3 )-xBiMg 2/3 Nb 1/3 O 3 (denoted as (1-x)BNKT-xBMN) and (1-y)(0.85BNKT-0.15BMN)-ySr 0.7 La 0.2 TiO 3 with y = 0.3 (denoted as BNKMN-0.3SLT) were prepared by means of a conventional solid state sintering method. Effects of introduction of BiMg 2/3 Ni 1/3 O 3 and Sr 0.7 La 0.2 TiO 3 on phase structure, microstructure, and dielectric , ferroelectric and energy storage properties of the ceramics were studied in detail. The ceramics (1-x)BNKT-xBMN show pure perovskite structure, while BNKMN-0.3SLT appears a secondary phase. All ceramics exhibit dense microstructures with mean grain sizes between 0.56 μm and 1.36 μm. The introduction of SLT into BNKMN causes obvious decrease in dielectric constant around Curie temperature , inducing the widest temperature window of 263 °C from 29 °C to 292 °C for TCC≤±15 %. The ceramic BNKMN-0.3SLT shows high electric breakdown strength (E b ∼ 300 kV/cm), large maximum polarization (P m ∼ 36.48 μC/cm 2 ), and low remanent polarization (P r ∼ 1.70 μC/cm 2 ), inducing high energy storage density of 4.03 J/cm 3 as well as high energy storage efficiency of 85.2 %.

materials science, ceramics
High energy storage performance of lead‐free Nb‐modified (Bi0.2Na0.2Ca0.2Ba0.2Sr0.2)TiO3 high‐entropy ceramics

Xue Zhang,Fan Zhang,Yiwen Niu,Zhiqiang Zhang,Yu Bai,Zhan Jie Wang

DOI: https://doi.org/10.1111/jace.19776

IF: 4.186

2024-02-28

Journal of the American Ceramic Society

Abstract:Owing to the intrinsic chemical disorder of microscopic composition, perovskite high‐entropy ceramics exhibit dielectric relaxation behaviors and are favorable for energy storage performance. In this work, (Bi0.2Na0.2Ca0.2Ba0.2Sr0.2)(Ti1−xNbx)O3 (BNCBST‐xNb, 0.01 ≤ x ≤ 0.25) ceramics were prepared using a hydrothermal method. The results indicate that Nb doping into BNCBST induces lattice expansion and deepens dielectric relaxation. Moreover, the BNCBST‐xNb ceramics exhibit a great enhancement of electrical breakdown strength (Eb) with Nb content, which results from the reduction of grain size, the increase of resistivity, the decrease of oxygen vacancies, and the enlargement of band gap width. Consequently, the BNCBST‐0.15Nb system presents an outstanding Eb of 497 kV/cm with excellent recoverable energy density (Wrec = 3.85 J/cm3) and efficiency (η = 87.7%), accompanying by the wide temperature stability (Wrec and η vary within ± 9.8% and ± 1.4% at 40–100°C) and fast discharge rate (t0.9 = 88 ns). The significant improvement of Eb and energy storage properties suggest that our research offers an effective strategy for developing lead‐free energy storage ceramics.

materials science, ceramics

[Problems associated with left-sided cardiac valve replacement in children].

Broadening the Dielectric Stability Temperature Range of BNBST Relaxor Ferroelectric Ceramics by Rare Earth Ce Doping for Energy Storage

Enhanced strain and electrostrictive properties in lead-free BNT-based ceramics via rare earth doping

Origin of the ultrahigh field-induced strain in the Gd-doped 0.854Bi0.5Na0.5TiO3-0.12Bi0.5K0.5TiO3-0.026BaTiO3 ternary ceramic system

Synthetic phospholipids as substrates for phospholipase C from Bacillus cereus.

Preparation and Properties of Nd-doped BCTH Lead-Free Ceramics by Solid-Phase Twin Crystal Method

Large electrostrain and high energy-storage of (1-x)[0.94(Bi0.5Na0.5) TiO3-0.06BaTiO3]-xBa(Sn0.70Nb0.24)O3 lead-free ceramics

(Na0.8-K0.2Li )0.5Bi0.5Ti0.985Ta0.015O3 lead-free ceramics with large strain and high recoverable energy density

Achieving giant field-induced strain in BS-modified BNKT lead-free ferroelectric ceramics

Giant electric field-induced strain and structure evolution of NaTaO3-modified 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 Pb-free ceramics

Electric Field-Induced Giant Strain and Piezoelectricity Enhancement Effect in (bi1/2na1/2)0.935+xba0.065ti1−x(pr1/2nb1/2)xo3 Lead-Free Ceramics

Fatigue of unknown aetiology--a review.

Enhanced low‐field energy storage performance in Nd3+‐doped (Bi0.40K0.2Na0.2Sr0.2)TiO3 high‐entropy ceramics

Enhancement of Electro-Strain Performance of KTaO3 Modified 0.94Bi0.5na0.5tio3-0.06Batio3 Ceramics

Dielectric, Ferroelectric and Field-Induced Strain Response of Lead-Free (fe, Sb)-modified (bi0.5na0.5)0.935ba0.065tio3 Ceramics

Dielectric and energy storage properties of ternary doped barium titanate-based ceramics

Enhancement of electro-strain performance of KTaO3 modified 0.94BiNaTiO3-0.06BaTiO3 ceramics

Ferroelectric properties and large electric field-induced strain of Eu<SUP>3+</SUP>-doped Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-BaTiO3 lead-free ceramics

The effect of rare-earth oxides on the energy storage performances in BaTiO3 based ceramics

Improved dielectric temperature stability and energy storage properties of BNT-BKT-based lead-free ceramics

High energy storage performance of lead‐free Nb‐modified (Bi0.2Na0.2Ca0.2Ba0.2Sr0.2)TiO3 high‐entropy ceramics