Fluorine and nitrogen co-doped mesoporous carbon derived from polytetrafluoroethylene@melamine sponge for supercapacitor application

Haiyang Jia,Jingfang Zhu,Meng Zhang,Shijing Sang,Feng Hu,Fen Zhang
DOI: https://doi.org/10.1016/j.est.2021.102613
IF: 9.4
2021-06-01
Journal of Energy Storage
Abstract:<p>By using sponge composite as the precursor, a nitrogen and fluorine co-doped porous carbon is prepared <em>via</em> a chemical etching process. The specific surface area and total volume of the mesoporous carbon are 1799 m<sup>2</sup> <em>g</em><sup>−1</sup> and 1.48 m<sup>3</sup> <em>g</em><sup>−1</sup>, respectively. The doping amount of the fluoride and nitrogen in the resulting co-doped carbon is determined to be 1.2 at.% and 2.7 at.%, respectively. In a three-electrode system in 6 M KOH electrolyte, when mass loading of active material is 4 and 6 mg, electrodes deliver specific capacitances of 299 and 284 F <em>g</em><sup>−1</sup> at a current density of 1 A <em>g</em><sup>−1</sup>, respectively. In a symmetric-electrode system in the same electrolyte, an electrode shows the specific capacitance of 233 F <em>g</em><sup>−1</sup> at the same current density. In aqueous electrolyte, the assembled simulated supercapacitor reaps a maximum specific energy of 8.3 W h kg<sup>−1</sup> at a specific power of 101 W kg<sup>−1</sup>. Under the current density of 5 A <em>g</em><sup>−1</sup>, after 6000 cycles, the 94.1% remaining capacitance indicates a good cycle stability. Findings demonstrate the synthesized fluorine and nitrogen co-doped porous carbon can be used as electroactive material for high-performance supercapacitor.</p>
energy & fuels
What problem does this paper attempt to address?