Abstract:A fast and reliable range monitoring method is required to take full advantage of the high linear energy transfer provided by therapeutic ion beams like carbon and oxygen while minimizing damage to healthy tissue due to range uncertainties. Quasi-real-time range monitoring using in-beam positron emission tomography (PET) with therapeutic beams of positron-emitters of carbon and oxygen is a promising approach. The number of implanted ions and the time required for an unambiguous range verification are decisive factors for choosing a candidate isotope. An experimental study was performed at the FRS fragment-separator of GSI Helmholtzzentrum für Schwerionenforschung GmbH, Germany, to investigate the evolution of positron annihilation activity profiles during the implantation of [Formula: see text]O and [Formula: see text]O ion beams in a PMMA phantom. The positron activity profile was imaged by a dual-panel version of a Siemens Biograph mCT PET scanner. Results from a similar experiment using ion beams of carbon positron-emitters [Formula: see text]C and [Formula: see text]C performed at the same experimental setup were used for comparison. Owing to their shorter half-lives, the number of implanted ions required for a precise positron annihilation activity peak determination is lower for [Formula: see text]C compared to [Formula: see text]C and likewise for [Formula: see text]O compared to [Formula: see text]O, but their lower production cross-sections make it difficult to produce them at therapeutically relevant intensities. With a similar production cross-section and a 10 times shorter half-life than [Formula: see text]C, [Formula: see text]O provides a faster conclusive positron annihilation activity peak position determination for a lower number of implanted ions compared to [Formula: see text]C. A figure of merit formulation was developed for the quantitative comparison of therapy-relevant positron-emitting beams in the context of quasi-real-time beam monitoring. In conclusion, this study demonstrates that among the positron emitters of carbon and oxygen, [Formula: see text]O is the most feasible candidate for quasi-real-time range monitoring by in-beam PET that can be produced at therapeutically relevant intensities. Additionally, this study demonstrated that the in-flight production and separation method can produce beams of therapeutic quality, in terms of purity, energy, and energy spread.

Optical Readout Time Projection Chamber (O-TPC) for a Study of Oxygen Formation in Stellar Helium Burning

Amplification and scintillation properties of oxygen-rich gas mixtures for optical-TPC applications

Studying The Heavy-Ion Fusion Reactions At Stellar Energies Using Time Projection Chamber

Study Of Rare Nuclear Processes With Cuore

measurements and the astrophysical reaction rate

Event Reconstruction in a Liquid Xenon Time Projection Chamber with an Optically-Open Field Cage

A gaseous time projection chamber with Micromegas readout for low-radioactive material screening

Design and Implementation of a New Apparatus for Astrochemistry: Kinetic Measurements of the CH + OCS Reaction and Frequency Comb Spectroscopy in a Cold Uniform Supersonic Flow

Design and commissioning of a 600 L Time Projection Chamber with Microbulk Micromegas

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: Insights into the volume above a micro cavity plasma array

Performance of an optically read out time projection chamber with ultra-relativistic electrons

Sensitive Probing of Exoplanetary Oxygen via Mid Infrared Collisional Absorption

Performance of the CAT-TPC Based on Two-Dimensional Readout Strips

Deep Underground Laboratory Measurement of C13(α,n)O

Decay study of with an optical time-projection chamber

Simultaneous Measurement of the HT and DT Fusion Burn Histories in Inertial Fusion Implosions

Active target TPC for study of photonuclear reactions at astrophysical energies

Accurate gamma and MeV-electron track reconstruction with an ultra-low diffusion Xenon/TMA TPC at 10 atmospheres

A Gas Monitoring Chamber for High Pressure Applications

Quasi-real-time range monitoring by in-beam PET: a case for 15O