Tertiary structure in transfer ribonucleic acids.

J. R. Fresco,A. Adams,R. Ascione,D. Henley,T. Lindahl

DOI: https://doi.org/10.1101/SQB.1966.031.01.068

Cold Spring Harbor Symposia on Quantitative Biology

Abstract:

What problem does this paper attempt to address?

Synthesis of urea-containing sodium alginate-g-poly(acrylic acid-co-acrylamide) superabsorbent-fertilizer hydrogel reinforced with carboxylated cellulose nanocrystals for efficient water and nitrogen utilization

Ayoub El Idrissi,Abdelouahed El Gharrak,Ghizlane Achagri,Younes Essamlali,Othmane Amadine,Adil Akil,Said Sair,Mohamed Zahouily

DOI: https://doi.org/10.1016/j.jece.2022.108282

IF: 7.7

2022-07-24

Journal of Environmental Chemical Engineering

Abstract:A novel slow-release nitrogen fertilizer hydrogel nanocomposite was fabricated by in-situ free radical copolymerization between sodium alginate (SA), acrylic acid (AA), and acrylamide (AM) in an aqueous media using N, N'methylene bis-acrylamide (MBA) as a crosslinker, citric acid-functionalized cellulose nanocrystals (C-CNC) as a nanofiller and urea as a source of nitrogen. Several variables influencing the water absorbency of the fabricated hydrogels were studied and optimized. The optimized Hyd/C-CNC and Hyd/C-CNC/urea were fully characterized to determine their structure, thermal stability, and morphology. Swelling behavior in saline solutions such as (NaCl, CaCl 2, and FeCl 3 ) and at various pHs (2−12) as well as the swelling kinetics were investigated. The incorporation of functionalized cellulose nanocrystals into the hydrogel was very beneficial since it boosts the water absorbency from 260 ± 8 g/g for hydrogel without C-CNC to 316 ± 10 g/g for the hydrogel with 1.5 wt% of C-CNC. The soil experiment showed an enhanced soil water-retention capacity after the addition of 1 wt% of the Hyd/C-CNC polymer. The addition of urea confers to the Hyd/C-CNC material an enhanced water retention property and a slow-release nitrogen property. Under optimized conditions, the Hyd/C-CNC/urea had a total nitrogen amount of 13.66%, a high swelling degree (412 ± 4 g/g), and prolonged nitrogen release duration (20 days for complete N-release). Thus, the good water adsorption capacity, as well as the good slow-release fertilizer property, make this material a suitable water-saving material for agriculture applications.

engineering, chemical, environmental
Urea intercalated encapsulated microalgae composite hydrogels for slow-release fertilizers

Nada Sarhan,Esraa G Arafa,Nada Elgiddawy,Khaled N M Elsayed,Fatma Mohamed

DOI: https://doi.org/10.1038/s41598-024-58875-1

2024-07-01

Abstract:In agriculture, hydrogels can be addressed for effective operation of water and controlled-release fertilizers. Hydrogels have a significant ability for retaining water and improving nutrient availability in soil, enhancing plant growth while reducing water and fertilizer usage. This work aimed to prepare a hydrogel composite based on microalgae and biopolymers including chitosan and starch for use as a soil conditioner. The hydrogel composite was characterized by FTIR, XRD, and SEM. All hydrogel properties were studied including swelling degree, biodegradability, water-holding capacity, water retention, and re-swelling capacity in soil and water. The urea fertilizer loading and releasing behavior of the prepared hydrogels were investigated. The results revealed that the range of the maximal urea loading was between 99 and 440%, and the kinetics of loading was fitted with Freundlich model. The urea release % exhibited 78-95%, after 30 days, and the kinetics of release was fitted with zero-order, Higuchi, and Korsmeyer-Peppas models. Furthermore, the prepared hydrogels obtained a significant water-holding capacity, after blending soil (50 g) with small amount of hydrogels (1 g), the capacity increased in the range of 99.4-101.5%. In sum, the prepared hydrogels have the potential to be applied as a soil conditioner.
SYNTHESIS OF CELLULOSE-BASED HYDROGEL FOR REGULATING THE RELEASE OF NITROGEN FERTILIZER

MOUROUG THAHER ZYADEH,IMAD MOHD KHAIR HAMADNEH,MAHMOUD ABDEL-RAHMAN KASRAWI,HAYTHEM SAADEH,MOHAMMED HASAN SHAHEIN,,,,,,

DOI: https://doi.org/10.35812/cellulosechemtechnol.2023.57.07

2023-02-28

Cellulose Chemistry and Technology

Abstract:"This study aimed to synthesize a cellulose-based hydrogel as a new green fertilizer with slow-release properties. The cellulose-based hydrogel was prepared by reacting carboxymethyl cellulose solution with cellulose and was crosslinked with citric acid. The structure of the hydrogel was confirmed by FT-IR. The nitrogen fertilizers KNO3 and (NH4)2SO4 were loaded during the preparation. The swelling behavior of the hydrogel in deionized water was studied, in addition to the effects of pH, salinity, and drought on swelling behavior. Finally, the fertilizer release behavior in deionized water and a soil mix was investigated, in addition to the soil water content. The optimum hydrogel formulation (HG) showed good absorbance capacity – of 450%, and good durability for one month in deionized water. The swelling-deswelling studies revealed its sensitivity to different solutions. The HG loaded with nitrogen fertilizers showed slow, sustained release rates in deionized water and the soil mix; the cumulative release rates approached 70%, 65%, 60%, and 65%, respectively. Moreover, soil moisture was improved by the addition of the hydrogel by 100% on day 20 and reached 12% on day 30. The results were in accordance with the Committee of European Normalization standards. In conclusion, this new green hydrogel could be used in agricultural applications."

materials science, paper & wood
Polyvinyl alcohol-soy protein isolate hydrogels: Controlled release of fertilizer and matrix nutrients for sustainable agriculture

Ardra Ashok,P.A. Saeed,Smitha Manholi,A. Sujith,Ardra Ashok K.P.,Saeed P.A.,Sujith A.

DOI: https://doi.org/10.1016/j.jclepro.2024.141827

IF: 11.1

2024-04-12

Journal of Cleaner Production

Abstract:Controlled release of fertilizers using hydrogels is one of the sustainable methods for increasing the effectiveness of chemical fertilizers and reducing their adverse effects on the environment. Here, we report an eco-friendly hydrogel based on polyvinyl alcohol (PVA) and soy-protein isolate (SPI) crosslinked with citric acid (CA) for the controlled release of fertilizer. Initially, PVA-SPI blends (PS) were prepared by solvent casting method and studied their physiochemical properties. The optimized blend (PS 8/2) was crosslinked with various weight percentages (5– 30%) of citric acid (CA). Hydrogels with 20% CA exhibited optimum properties which were then loaded with urea to prepare controlled release fertilizer hydrogel (CRFH). Spectrophotometry studies showed that 74.1% of urea was released by the samples in 28 days. Additionally, the soy-protein matrix released the nutrients along with urea, which can be considered an added benefit. Kinetics study revealed that the release of nutrients followed the Ritger-Peppas model. The water retention study indicated that the samples could retain water for up to 30 days with an increase in gel content. Plant growth performance, germination and drought resistance study were evaluated using amaranthus and pea seedlings as model plants. The results indicated a significant improvement in the growth performance of the plants. Also, a degradation rate of 65% was attained for hydrogel samples when it was buried in the soil for 100 days. The prepared hydrogels can therefore be regarded as a potential candidate for sustainable agriculture due to their controlled-dual release properties, water-retaining capacity, affordability, non-toxicity, and environmental friendliness.

environmental sciences,green & sustainable science & technology,engineering, environmental
Polyvinyl alcohol composite hydrogels/epoxidized natural rubber composites (CMCS/PVA/CS-ENR) with core-shell structure as biomass coating material for slow-release nitrogen fertilizer

Mei Zhang,Yizhong Yuan,Jie Jin,Jinyu Sun,Xiaohui Tian

DOI: https://doi.org/10.1016/j.porgcoat.2023.107744

IF: 6.6

2023-06-24

Progress in Organic Coatings

Abstract:Using natural rubber (NR)/chitosan (CS)/polyvinyl alcohol (PVA) as raw materials, biodegradable semi-IPN (semi-interpenetrating polymer network) composites were prepared by thiol-epoxy click reaction under UV light, which was used as the shell of sustained release preparation. Using polyvinyl alcohol (PVA)/carboxymethyl chitosan (CMCS) as raw material and vanillin as the cross-linking agent, hydrogen-bonded hybrid network hydrogel loaded with urea was prepared by freeze-thaw cycle, which was used as the core of sustained-release preparation. Finally, a green-coated urea fertilizer with core-shell structure was prepared to ameliorate the environmental pollution of slow-release fertilizer (for example, synthetic polymer-coated fertilizers are difficult to biodegrade), as well as to achieve the water retention and the effective slow-release. The high CS/PVA contents and the combination of the hydrogel core and the rubber shell significantly improved the mechanical properties of the coating material (tensile strength above 5 MPa, elongation at break up to 1400 %), hydrophilicity (to promote the degradation rate of the rubber shell) and soil water retention of the coating material (close to pure hydrogel), showing enhanced reaction. In terms of slow-release effect, coated nitrogen fertilizer with 3 % CS content, 5 % PVA content and 10-min coating time (SRP3/10) achieved the best slow-release effect of nitrogen (N) in water (62.7 % at 10 days), which was related to the hydrophilicity, semi-IPN skeleton and the cross-linking structure of the network, and the release conformed to the Korsmeyer-Peppas model with a non-Fickian diffusion release mechanism, indicating that the behavior of N release was mediated by a combination of drug diffusion and skeleton dissolution.

materials science, coatings & films,chemistry, applied
Superabsorbent Hydrogels Based to Polyacrylamide/Cashew Tree Gum for the Controlled Release of Water and Plant Nutrients

Heldeney Rodrigues Sousa,Idglan Sá Lima,Lucas Matheus Lima Neris,Albert Santos Silva,Ariane Maria Silva Santos Nascimento,Francisca Pereira Araújo,Rafael Felippe Ratke,Durcilene Alves Silva,Josy Anteveli Osajima,Leilson Rocha Bezerra,Edson Cavalcanti Silva-Filho

DOI: https://doi.org/10.3390/molecules26092680

IF: 4.6

2021-05-03

Molecules

Abstract:Agricultural production is influenced by the water content in the soil and availability of fertilizers. Thus, superabsorbent hydrogels, based on polyacrylamide, natural cashew tree gum (CG) and potassium hydrogen phosphate (PHP), as fertilizer and water releaser were developed. The structure, morphology, thermal stability and chemical composition of samples of polyacrylamide and cashew tree gum hydrogels with the presence of fertilizer (HCGP) and without fertilizer (HCG) were investigated, using X-ray diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA/DTG) and Energy Dispersive Spectroscopy (EDS). Swelling/reswelling tests, textural analysis, effect of pH, release of nutrients and kinetics were determined; the ecotoxicity of the hydrogels was investigated by the Artemia salina test. The results showed that PHP incorporation in the hydrogel favored the crosslinking of chains. This increased the thermal stability in HCGP but decreased the hardness and adhesion properties. The HCGP demonstrated good swelling capacity (~15,000 times) and an excellent potential for reuse after fifty-five consecutive cycles. The swelling was favored in an alkaline pH due to the ionization of hydrophilic groups. The sustained release of phosphorus in HCGP was described by the Korsmeyer–Peppas model, and Fickian diffusion is the main fertilizer release mechanism. Finally, the hydrogels do not demonstrate toxicity, and HCGP has potential for application in agriculture.

chemistry, multidisciplinary,biochemistry & molecular biology
A urea-loaded hydrogel comprising of cellulose nanofibers and carboxymethyl cellulose: An effective slow-release fertilizer

Priya E,Akash Jha,Sudipta Sarkar,Pradip K. Maji

DOI: https://doi.org/10.1016/j.jclepro.2023.140215

IF: 11.1

2024-01-01

Journal of Cleaner Production

Abstract:Conventional fertilizers used worldwide to increase crop yield have several environmental and economic issues resulting from their quickly soluble nature, causing most of the fertilizers to be lost through agricultural field runoff and leachate. Utilizing slow or controlled-release fertilizers may reduce the issues associated with conventional fertilizers. However, many commercially available variants of slow-release formulations are ecologically unsustainable as they are made of non-biodegradable polymers. In the present study, a hydrogel composed of cellulose nanofibers (CNF) and carboxyl methyl cellulose (CMC) was synthesized for use as a biodegradable and environmentally sustainable host for carrying urea within its matrix and released the same slowly over a long period of time. The swelling measurements showed that the thermally stable urea-loaded CNF/CMC hydrogel (UCNF) had a high water absorption capacity of 147 g/g in distilled water owing to its porous morphology and the presence of various polar groups. When exposed to a dry environment, it released the absorbed moisture slowly over a period of more than 2 weeks. The urea release rate was also relatively slow; it took about 30 days to release the urea loaded in UCNF. The results indicated that urea diffusion from the material was non-Fickian in character and fit well with the pseudo-second-order kinetics model. The hydrogel demonstrated excellent biodegradability; more than 80% by weight of the hydrogel disappeared through biodegradation by soil bacteria within 3 months. The plant study revealed that adding UCNF to the soil effectively enhanced the seed germination and growth of the plant. Also, plants treated with urea-loaded hydrogel had better growth than the pure urea- and control plant samples. The study found that crosslinked and functionalized cellulose nanofiber may effectively transport water and fertilizer slowly and sustainably.

environmental sciences,green & sustainable science & technology,engineering, environmental
[Influence of the direction of light flow and technology of the composite application for the adhesion to hard tissues of a tooth].

S. Nikolaenko,R. Frankenberger

Abstract:
Hydrophilic Nanofiber of Bacterial Cellulose Guided the Changes in the Micro-Structure and Mechanical Properties of Nf-Bc/pva Composites Hydrogels

Kun Qiao,Yudong Zheng,Shaolin Guo,Jue Tan,Xiaohua Chen,Jiaqi Li,Duo Xu,Jun Wang

DOI: https://doi.org/10.1016/j.compscitech.2015.08.004

IF: 9.1

2015-01-01

Composites Science and Technology

Abstract:Hydrophilic nanofibers derivate from bacterial cellulose (nf-BC) were compounded with PVA colloidal sol to form physical crosslinking hybrid hydrogels. With the hydrophilic and hydrogen bonding interaction between the groups of PVA and nf-BC during the composite gel phase transformation process, a regular and uniform distributed porous structure was formed which interconnected through fibrous funicular cords composed of PVA gel along nf-BC orientation by controlling the content of nf-BC and gel transition condition. The micro-morphology, chemical structure, crystallinity and mechanical properties of the nf-BC/PVA hydrogels changed with the different proportion and distribution of nf-BC. It has been verified that hydrophilic nf-BC acts as “crosslinking agent” and reinforced phase which can guide the composite hydrogels to form more ordered and compact porous structure, via enhancing the interaction of hydrogen bonds and physical crosslinking points between nf-BC and PVA macromolecule, finally resulted in the enhancement of their mechanical performances. The composite hydrogels have broad application prospects in the field of medicine, such as artificial cartilage, blood vessel, wound dressing and so on.
Preparation of pH ‐responsive cellulose nanofibril/sodium alginate based hydrogels for drug release

Yuhang Li,Cong Wang,Yunhao Luan,Wanyi Liu,Tiantian Chen,Pengtao Liu,Zhong Liu

DOI: https://doi.org/10.1002/app.51647

IF: 3

2021-09-15

Journal of Applied Polymer Science

Abstract:In this work, hydrogels composed of cellulose nanofibril (CNF) and sodium alginate (SA) were prepared as a pH-responsive release system by controlling the amount of CNF and SA. Scanning electron microscopy, thermogravimetric analysis, and swelling rate methods were used to characterize. The results showed that when the mass ratio of CNF to SA was 2:1, CNF/SA hydrogels with better morphology were obtained. Due to the deprotonation or protonation of calcium alginate, as the pH changing from 1.5 to 11.0, the swelling ratio increased from 7 times to 19 times compared with its dry weight. The drug release behaviors of the CNF/SA hydrogels using ibuprofen (IBU) as a model drug were investigated in vitro. The release of IBU was faster in alkaline conditions and slower in acidic conditions. The drug release mechanism under pH stimulation could be interpreted by the Fickian diffusion and erosion effect based on Korsmeyer-Peppas model.

polymer science
Fabrication and Characterization of One Interpenetrating Network Hydrogel Based on Sodium Alginate and Polyvinyl Alcohol

Shangwen Zhang,Dandan Han,Zongxian Ding,Xin Wang,Dan Zhao,Yan Hu,Xincai Xiao

DOI: https://doi.org/10.1007/s11595-019-2112-0

2019-06-01

Abstract:<p>One interpenetrating network hydrogel based on sodium alginate (SA) and polyvinyl alcohol (PVA) was synthesized by combining the raw materials of PVA and SA with the double physical crosslinking methods of freezing thawing and Ca<sup>2+</sup> crosslinking. The PVA-SA composite hydrogel have been characterized by scanning electron microscopy for surface morphology, infrared spectroscopy for investigating the chemical interactions between PVA and SA, X-ray diffraction for studying the PVA-SA composite structure property and thermal gravimetric for understanding the PVA-SA composite thermal stability. The swelling behavior and the degradation rate of the PVA-SA composite hydrogel were studied in simulated gastrointestinal fluid. Using bovine serum albumin (BSA) and salicylic acid as the model drugs, the release behavior of the PVA-SA composite hydrogel on macromolecular protein drugs and small molecule drug were evaluated. The results showed that the water absorption and degradation ability of the PVA-SA composite hydrogel was much better compared to the pure SA hydrogel or pure PVA hydrogel. The hydrogel exhibited remarkable pH sensitivity and the network was stable in the simulated intestinal fluid for more than 24 h. With the advantages such as mild preparation conditions, simple method, less reagent and none severe reaction, the PVA-SA composite hydrogel is expected to be a new prosperous facile sustained drug delivery carrier.</p>
Hydrogel/clinoptilolite nanocomposite-coated fertilizer: swelling, water-retention and slow-release fertilizer properties

Azam Rashidzadeh,Ali Olad,Adel Reyhanitabar

DOI: https://doi.org/10.1007/s00289-015-1428-y

IF: 2.843

2015-06-16

Polymer Bulletin

Abstract:Preparation of a new core–shell slow-release fertilizer formulation was conducted through the coating of commercial NPK fertilizer with hydrogel/clinoptilolite (Hyd/CL) nanocomposite. The Hyd/CL nanocomposite was prepared from free radical polymerization of sodium alginate, acrylic acid, acrylamide, and clinoptilolite zeolite. The uniform coating on the surface of the fertilizer granules was verified by scanning electron microscopy. The swelling kinetics as well as the water-retention property and water absorption rate of the prepared samples was studied. Furthermore, the release of fertilizer from Hyd/CL nanocomposite-coated fertilizer granules into soil showed that the Hyd/CL nanocomposite layer around the fertilizer granules caused the system to liberate the nutrient in a more controlled manner (lower than 57 % of loaded fertilizer on the 30 days) than that with the uncoated fertilizer. The overall results eventually suggested that the hydrogel nanocomposite designed in this work can be used as a coating on granular fertilizer compounds for application in agriculture due to its water-retention and slow-release properties.

polymer science
Metabolisable energy value and digestibility of fat and fatty acids in linseed determined with growing broiler chickens

L. Ortiz,A. Rebolé,C. Alzueta,María L. López Rodríguez,J. Treviño

DOI: https://doi.org/10.1080/713655010

2001-03-01

British Poultry Science

Abstract:1. In the first experiment, the AME N of linseed was evaluated at rates of 40, 80, 160 and 240 g/kg in a basal diet with broiler chickens aged 28 d using the total collection method. 2. Increasing the concentration of linseed decreased the AME N of diet, from 11.78 to 8.75 MJ/kg DM, and AME N of linseed, from 16.64 to -2.96 MJ/kg DM. The negative values clearly indicated that linseed interacted with the other dietary ingredients and impaired their energy utilisation. 3. In the second experiment, a semipurified diet with graded addition of linseed (80, 120, 160 and 240 g/kg DM) was evaluated for crude fat and fatty acid apparent digestibilities. The coefficients decreased from 0.602 to 0.359 for crude fat and from 0.661 to 0.352 for individual fatty acids as the level of linseed increased. 4. In both experiments, a quadratic regression model explained the relationship between data better than the linear model. 5. The presence of mucilage and other antinutritional factors in linseed might explain the results obtained in this study.
Controlled Release Behaviors of Tribenuron Methyl Herbicide and Potassium Nitrate Fertilizer from Natural Polymer Blended Poly(Vinyl Alcohol) Hydrogel Microspheres

K. Gupta,M. Elsabee,Wajeeha Jamil,F. H. Jabrail

DOI: https://doi.org/10.3844/AJASSP.2019.162.181

2019-05-01

American Journal of Applied Sciences

Abstract:Polyvinyl Alcohol (PVA) hydrogel microspheres for controlled release of fertilizer (KNO3) and Tribenuron Methyl Herbicide (TBM) were prepared by blending the naturally occurring Alginate (AL) and Pectin (PE). The cross-linking in PVA hydrogel microspheres was carried out by varying the amount of glutaraldehyde from 0.5-1.0 wt%. To control the loading and release properties of PVA hydrogel microspheres, a small amount of NaCl (0.2 wt%) was also added in fromulation of microspheres. The blending of PE and AL in PVA hydrogel microspheres was confirmed with FT-IR spectra and by increased thermal stability PVA hydrogel as determined by Differential Scanning Calorimetry (DSC) and Thermogravimetric (TGA) analysis. The PVA hydrogel microspheres were characterized for degree of swelling and for loading and cumulative release of fertilizer (KNO3) and herbicide (TBM), which were carried out in solutions of different pH and at different temperatures. The Scanning Electron Micrographs (SEM) of PVA hydrogel microspheres were recorded before and after the release of loaded agrochemicals and used to confirm the shape and homogeneous blending of PE/AL in PVA hydrogels. The enhanced brittle morphology form SEM images of PVA hydrogel microspheres after the release of loaded agrochemicals has suggested the controlled release of agrochemicals through a mechanism of degradation of polymer chains. Thus natural polymer blended PVA hydrogel microspheres are found to be a potential candidate for the formulation of controlled release systems for the application of agrochemicals in soils and to overcome the environmental problem, which usually encountered on applications of fertilizers and herbicides in agricultural fields by conventional methods.

Agricultural and Food Sciences,Environmental Science,Computer Science,Materials Science
Uncertainty modeling and predicting the probability of stability and performance in the manufacture of dynamic systems.

R. Fales

DOI: https://doi.org/10.1016/j.isatra.2010.02.003

IF: 7.3

2010-10-01

ISA Transactions

Abstract:
Konjac glucomannan/pectin/Ca-Mg hydrogel with self-releasing alkalinity to recover phosphate in aqueous solution

Xingyu Wu,Xinyu Zhang,Yumei Xian,Yan Liu,Ling Luo,Lilin Wang,Chengyi Huang,Chao Chen,Jinsong He,Yanzong Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2023.126355

IF: 8.2

2023-08-28

International Journal of Biological Macromolecules

Abstract:The combination of polysaccharides can obtain stable, degradable, and environmentally friendly hydrogels, which have broad application prospects in adsorbents assembly. With Ca 2+ and Mg 2+ as crosslinkers, a new pectin/Konjac glucomannan/Ca-Mg composite hydrogel was prepared for phosphate adsorption by the alkali-thermal co-reaction method. Since Mg(OH) 2 can create a suitable pH condition for phosphate adsorption by Ca, Ca and Mg synergistically promoted phosphate adsorption and remained stable in the pH range of 4 to 10. FTIR, SEM-EDS, XRD, XPS, and zero potential analysis corroborated that the hydrogel used Ca and Mg as active sites to trap pollutants by electrostatic adsorption and fix phosphate through complexation to form Mg 3 (PO 4 ) 2 ·8H 2 O and CaPO 3 (OH) 2 ·H 2 O. Furthermore, it is unnecessary to separate the recovered phosphate from the hydrogel, and it can be used directly as a fertilizer. By being reused in the soil, it promoted seed germination and seedling growth. This adsorbent has the potential for recovery as a phosphorus-containing organic fertilizer after phosphorus adsorption.

polymer science,biochemistry & molecular biology,chemistry, applied
Assembly of Polyacrylamide-Sodium Alginate-Based Organic-Inorganic Hydrogel with Mechanical and Adsorption Properties

Yiying Yue,Xianhui Wang,Qinglin Wu,Jingquan Han,Jianchun Jiang

DOI: https://doi.org/10.3390/polym11081239

IF: 5

2019-07-26

Polymers

Abstract:Hydrogels have been widely used in water purification. However, there is not much discussion and comparison about the effects of different nanofillers on the reinforcement and adsorption performances of hydrogels, which can be subjected to rapid water flow and possess strong adsorption ability. In this work, polyacrylamide (PAAM)-sodium alginate (SA) interpenetrating polymer network-structured hydrogels were prepared by in situ polymerization. PAAM formed the first flexible network and SA constructed the second rigid network. Three kinds of inorganic nanoparticles including carbon nanotubes (CNTs), nanoclays (NCs), and nanosilicas (NSs) were incorporated into a PAAM-SA matrix via hydrogen bond. The obtained hydrogels exhibited a macroporous structure with low density (≈1.4 g/cm3) and high water content (≈83%). Compared with neat PAAM-SA, the hydrogels with inorganic nanoparticles possessed excellent mechanical strengths and elasticities, and the compression strength of PAAM-SA-NS reached up to 1.3 MPa at ε = 60% by adding only 0.036 g NS in a 30 g polymer matrix. However, CNT was the best filler to improve the adsorption capacity owing to its multi-walled hollow nanostructure, and the adsorption capacity of PAAM-SA-CNT was 1.28 times higher than that of PAAM-SA. The prepared hydrogels can be potential candidates for use as absorbents to treat wastewater.

polymer science
Eco-friendly cellulose-based hydrogels derived from wastepapers as a controlled-release fertilizer

Dayang Fazirah Binyi Abg Ahmad,Mohd Effendi Wasli,Cindy Soo Yun Tan,Zaki Musa,Suk-Fun Chin

DOI: https://doi.org/10.1186/s40538-023-00407-6

2023-05-20

Chemical and Biological Technologies in Agriculture

Abstract:In this study, an eco-friendly controlled release fertilizer cellulose-based hydrogel was prepared from cellulose fibers derived from wastepaper, epichlorohydrin (ECH) as a crosslinker and carboxy methyl cellulose (CMC) as a gelling agent. A maximum swelling capacity of 2000% was achieved for cellulose hydrogel with optimum composition. The soil moisture contents in the presence of optimized cellulose hydrogels were determined using the digital moisture meter. Maximum soil moisture of 36.5% was obtained in topsoil, followed by 30.1% in wet clayey soil and 23.4% in sandy soil after 7 days. Urea as a model fertilizer was loaded onto the cellulose hydrogels to control the release of fertilizer. The maximum loading capacity of urea in cellulose hydrogel is 0.51 g/g. The urea-controlled release profiles of the cellulose hydrogel in distilled water and various types of soils were investigated. The formulation of cellulose hydrogels was observed to facilitate the gradual release of urea, with about 74.71% release in topsoil, 73.37% release in wet clayey soil and 71.84% release in sandy soil within 42 days when compared to the free urea which was about 97.32%, 95.09% and 98.47% release in topsoil, wet clayey soils and sandy soils, respectively within 7 days. The result of this study shows that the urea-loaded cellulose hydrogel could be a promising controlled-release fertilizer.

agriculture, multidisciplinary
Sustained urea release performance of humic acid hydrogel for green vegetable growth environment evaluation

Jie Song,Lijun Chen,Yuhua Niu,Huan Ruan

DOI: https://doi.org/10.1007/s10934-022-01282-6

2022-06-23

Journal of Porous Materials

Abstract:In view of the eutrophication of the water environment caused by fertilizer leaching and the problem of nondegradability of the current slow-release fertilizers, potassium humate (KHA), sodium alginate (SA), and acrylic acid (AA) were used as raw materials to synthesize a KHA/SA/PAA hydrogel-based sustained-release material onto which urea was loaded. Infrared spectroscopy and scanning electron microscopy analyses indicated that KHA, SA, and, AA had undergone graft copolymerization. The polymer network exhibited a porous structure, and its degradation rate was 1.21%/day. The swelling and diffusion models of materials under different pH conditions are discussed. The material's equilibrium swelling rate was as high as 621.46% at pH 7. The results indicated that the diffusion of urea from the material was non-Fickian in character and urea release was favored in an acidic environment, a behavior in accordance with the first-order kinetic equation and Higuchi equation. Potted vegetable experiments indicated the optimal dosage of soil and KHA/SA/PAA sustained-release fertilizer to be 500:1. After 14 days, the soluble protein content of green cabbage leaves and chlorophyll could be increased by 31.4% and 33.2%, respectively, whereas the malondialdehyde content could be reduced by 21.1%, indicating that soil treatment with the KHA/SA/PAA sustained-release fertilizer can effectively improve crop quality.

materials science, multidisciplinary,chemistry, physical, applied

Tertiary structure in transfer ribonucleic acids.

Synthesis of urea-containing sodium alginate-g-poly(acrylic acid-co-acrylamide) superabsorbent-fertilizer hydrogel reinforced with carboxylated cellulose nanocrystals for efficient water and nitrogen utilization

Urea intercalated encapsulated microalgae composite hydrogels for slow-release fertilizers

SYNTHESIS OF CELLULOSE-BASED HYDROGEL FOR REGULATING THE RELEASE OF NITROGEN FERTILIZER

Polyvinyl alcohol-soy protein isolate hydrogels: Controlled release of fertilizer and matrix nutrients for sustainable agriculture

Polyvinyl alcohol composite hydrogels/epoxidized natural rubber composites (CMCS/PVA/CS-ENR) with core-shell structure as biomass coating material for slow-release nitrogen fertilizer

Superabsorbent Hydrogels Based to Polyacrylamide/Cashew Tree Gum for the Controlled Release of Water and Plant Nutrients

A urea-loaded hydrogel comprising of cellulose nanofibers and carboxymethyl cellulose: An effective slow-release fertilizer

[Influence of the direction of light flow and technology of the composite application for the adhesion to hard tissues of a tooth].

Hydrophilic Nanofiber of Bacterial Cellulose Guided the Changes in the Micro-Structure and Mechanical Properties of Nf-Bc/pva Composites Hydrogels

Preparation of pH ‐responsive cellulose nanofibril/sodium alginate based hydrogels for drug release

Fabrication and Characterization of One Interpenetrating Network Hydrogel Based on Sodium Alginate and Polyvinyl Alcohol

Hydrogel/clinoptilolite nanocomposite-coated fertilizer: swelling, water-retention and slow-release fertilizer properties

Metabolisable energy value and digestibility of fat and fatty acids in linseed determined with growing broiler chickens

Controlled Release Behaviors of Tribenuron Methyl Herbicide and Potassium Nitrate Fertilizer from Natural Polymer Blended Poly(Vinyl Alcohol) Hydrogel Microspheres

Uncertainty modeling and predicting the probability of stability and performance in the manufacture of dynamic systems.

Konjac glucomannan/pectin/Ca-Mg hydrogel with self-releasing alkalinity to recover phosphate in aqueous solution

Assembly of Polyacrylamide-Sodium Alginate-Based Organic-Inorganic Hydrogel with Mechanical and Adsorption Properties

Eco-friendly cellulose-based hydrogels derived from wastepapers as a controlled-release fertilizer

Sustained urea release performance of humic acid hydrogel for green vegetable growth environment evaluation