Abstract:Several MPC applications implement a control strategy in which some of the system outputs are controlled within specified ranges or zones, rather than at fixed set points [J.M. Maciejowski, Predictive Control with Constraints, Prentice Hall, New Jersey, 2002]. This means that these outputs will be treated as controlled variables only when the predicted future values lie outside the boundary of their corresponding zones. The zone control is usually implemented by selecting an appropriate weighting matrix for the output error in the control cost function. When an output prediction is inside its zone, the corresponding weight is zeroed, so that the controller ignores this output. When the output prediction lies outside the zone, the error weight is made equal to a specified value and the distance between the output prediction and the boundary of the zone is minimized. The main problem of this approach, as long as stability of the closed loop is concerned, is that each time an output is switched from the status of non-controlled to the status of controlled, or vice versa, a different linear controller is activated. Thus, throughout the continuous operation of the process, the control system keeps switching from one controller to another. Even if a stabilizing control law is developed for each of the control configurations, switching among stable controllers not necessarily produces a stable closed loop system.Here, a stable MPC is developed for the zone control of open-loop stable systems. Focusing on the practical application of the proposed controller, it is assumed that in the control structure of the process system there is an upper optimization layer that defines optimal targets to the system inputs. The performance of the proposed strategy is illustrated by simulation of a subsystem of an industrial FCC system.

Double-layer model predictive control integrated with zone control

Multi-objective and Layered Steady-State Optimization Method of Model Predictive Control

A Method to Coordination for Decentralized Multi- Mpc Controllers in Integrated Plant

A multiple model predictive control strategy in the PLS framework

Triple-Mode Model Predictive Control Using Future Target Information

Multi-Model Predictive Control Based on a New Clustering Modeling Method

ILC-based Two-Layer Strategy for Economic Performance Improvement in Industrial MPC Systems

A Low-Cost Pole-Placement MPC Algorithm for Controlling Complex Dynamic Systems

Zone Model Predictive Control Algorithm Using Soft Constraint Method

A Distributed Model Predictive Control Algorithm with the Gap Metric Output Feedback Decoupling

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Key Technology and Industrial Application of Model Predictive Control Engineering Software

Application of Multi-variable Model Predictive Control to Automatic Variable-loading of Air Separation Unit

Multivariable Model Predictive Control for Integrating Processes with Input Constraints

Two-layer structure strategy for large-scale systems integrating online adaptive constraints adjustment method and cooperative distributed DMC algorithm

Iterative Learning Model Predictive Control for a Class of Continuous/Batch Processes

Multi-rate Multivariable Model Predictive Control For Integrating Processes

Cooperative distributed model predictive control based on topological hierarchy decomposition

A stable MPC with zone control

Closed-loop robust steady-state target calculation for model predictive control.

Pseudo Feedforward Dynamic Matrix Control Algorithm for Desired Closed-Loop Performance in MPC Systems