Activity of acid phosphatase in the cerebrospinal fluid of children.

Z. Laron,,A. Kowadlo

DOI: https://doi.org/10.1016/S0022-3476(61)80209-6

IF: 2.99

1961-07-01

Jornal de Pediatria

Abstract:

What problem does this paper attempt to address?

Formation of surface protective coatings on arsenopyrite using Al-catecholate complex and its mode of inhibition of arsenopyrite oxidation

Ilhwan Park,Carlito Tabelin,Hiroyuki Inano,Kensuke Seno,Kazuki Higuchi,Mayumi Ito,Naoki Hiroyoshi

DOI: https://doi.org/10.1051/matecconf/201926806015

2019-01-01

MATEC Web of Conferences

Abstract:Arsenopyrite is the most common arsenic-bearing sulfide mineral in nature. It is readily oxidized and releases toxic arsenic (As) into the environment when exposed to atmospheric conditions via anthropogenic activities like mining, mineral processing, extractive metallurgy, and underground space developments. Carrier-microencapsulation (CME) is a technique that uses metal(loid)-organic complexes to selectively form protective coatings on the surfaces of sulfide minerals. In this study, CME using Al-catecholate complexes (i.e., Al-based CME) was investigated to suppress the oxidation of arsenopyrite. Aluminum(III) and catechol form three complex species depending on the pH and among them, [Al(cat)] + was the most effective in suppressing arsenopyrite oxidation. Its suppressive effect was improved as [Al(cat)] + concentration increased due most likely to the formation of a more extensive surface protective coating at higher concentrations. Surface characterization of leaching residues using SEM-EDX and XPS indicates that CME-treated arsenopyrite was covered with bayerite (γ-Al(OH) 3 ). The results of electrochemical studies showed that the surface protective coatings suppressed both anodic and cathodic half-cell reactions of arsenopyrite oxidation.
Immobilization of arsenic in tailing by using iron and hydrogen peroxide

I J Chung,Y S Choi,S W Hong,H M Park

DOI: https://doi.org/10.1080/095933322086180325

Abstract:Under environmental conditions, arsenic (As) reveals anionic behavior and is converted into various forms in accordance with the Eh/pH condition. This causes the difficulty of treating As with other heavy metals in tailing. This study was carried out to develop the immobilization method of arsenic in tailing as ferric arsenate (FeAsO4) using hydrogen peroxide. According to experimental results, the extracted concentrations of arsenic and iron (Fe) from tailing were reduced up to 84% and 93%, respectively. In the experiment using pure Pyrite (FeS2) and As solution, As concentration decreased with an increase of hydrogen peroxide dosage. The experimental results of re-extraction showed that only 10% of As and 20% of Fe were extracted in the case of using hydrogen peroxide. As a result, the long-term stability of this method was clarified.
Performance and Mechanisms of PropS-SH/HA Coatings in the Inhibition of Pyrite Oxidation

Shuang Yang,Tianlie Luo,Jiajun Fan,Chengzhi Zhou,Mengyao Hu,Jinyu Wang,Lijia Wen,Li Qin,Guo Liu

DOI: https://doi.org/10.1021/acsomega.1c04793

IF: 4.1

2021-11-18

ACS Omega

Abstract:Acid mine drainage (AMD) entering the environment will cause long-term environmental pollution and ecological damage, the treatment or remediation for which has become a difficult worldwide problem. To control AMD at the source, a novel composite coating, hydroxyapatite (HA) as the filler embedded in a γ-mercaptopropyltrimethoxysilane (PropS-SH) coating, was introduced in this study. The performance and mechanisms of PropS-SH/HA coatings in the inhibition of pyrite oxidation were investigated by chemical leaching testing and material structure characterization. The results of the investigations revealed that the addition of an appropriate amount of HA can enhance the passivation efficiency of the PropS-SH coating. The best coating was obtained from 3% (v/v) of PropS-SH solution with 16 wt % HA, as this coating decreased pyrite oxidation by 78.7% (based on total Fe release). The main mechanism of PropS-SH/HA for the inhibition of pyrite oxidation involved the generation of a PropS-SH network through a polycondensation reaction. The addition of HA increased the stability of the passivation film composed of PropS-SH as well as the combining capacity of PropS-SH/HA through the formation of Si-O-Si and Fe-O-Si bonds, respectively.

chemistry, multidisciplinary
Transformation of Arsenic During Realgar Tailings Stabilization Using Ferrous Sulfate in a Pilot-Scale Treatment.

Xin Wang,He Zhang,Linling Wang,Jing Chen,Shiqi Xu,Huijie Hou,Yao Shi,Jingdong Zhang,Miao Ma,Daniel C. W. Tsang,John C. Crittenden

DOI: https://doi.org/10.1016/j.scitotenv.2019.02.289

IF: 9.8

2019-01-01

The Science of The Total Environment

Abstract:Massive realgar tailings abandoned in mining areas in China have caused serious arsenic (As) pollution seeking for urgent disposal. Stabilization treatment is a feasible strategy, however, stabilization technologies for realgar tailings, that arc Fe-deficient, Ca-rich and S-rich, have not been well developed to date. In this study, we conducted a pilot-scale stabilization treatment of realgar tailings via ferrous sulfate addition to evaluate the transformation of As during stabilization. We found that Si, As, Ca, and S were the predominant elements in the raw realgar tailings with a low content of Fe, and realgar ((As4S4)-S-II) and pharmacolite (CaElAs(V)O(4).2H(2)O) were the main As-bearing minerals. After the ferrous sulfate treatment, the As leaching concentration of realgar tailings was successfully reduced from 135 mg/L, to a level below the Chinese regulatory limit (2.5 mg/L). Based on the results of leaching tests, sequential extraction analysis, XRD, SEM-EDS, XPS, and thermodynamic modeling, we concluded that ferrous sulfate addition enhanced the transformation of Ca-As and S-As species to more stable Fe-As species, e.g., crystalline symplesite and amorphous Fe-As complex. Dissolution of pharmacolite was facilitated by H+ and SO42- derived from the hydrolysis and oxidation of ferrous sulfate, and oxidation of realgar could be promoted by reactive oxygen species (ROSS) from Fe(II) oxygenation. This study improved our understanding of As transformation pathways in realgar tailings during ferrous sulfate treatment, which could serve as an alternative scheme for realgar tailings stabilization. (C) 2019 Elsevier B.V. All rights reserved.
Stability of continuously produced Fe(II)/Fe(III)/As(V) co-precipitates under periodic exposure to reducing agents

Christoph Doerfelt,Thomas Feldmann,Renaud Daenzer,George P Demopoulos

DOI: https://doi.org/10.1016/j.chemosphere.2015.05.096

IF: 8.8

Chemosphere

Abstract:Arsenic mobilized during ore processing necessitates its effective removal from process effluents and disposal in environmentally stable tailings. The most common method to accomplish this involves co-precipitation with excess ferric iron during lime neutralization. The precipitates produced are stable under oxic conditions. This may not be true, however, under sub-oxic or anoxic conditions. In this context, the potential stabilizing role of ferrous iron on arsenic removal/retention becomes important. As such, this work investigates the removal and redox stability of arsenic with ferrous, ferric and mixtures of both. The stability of produced solids is monitored in terms of arsenic release over time. It was found that ferrous was very effective for arsenic (V) removal with Fe(II)/As(V)=4, reducing its concentration down to <15 ppb via the apparent formation of ferrous arsenate. The presence of Fe(II) seemed to favor an oxidation path toward goethite (and possibly scorodite) formation in the aged bench-scale tailings. When pH and Eh were regularly adjusted with lime and sulfite or sulfide, slightly higher arsenic amounts were released (1-5 mg L(-1)); ferrous again was found to oxidize. Hence, it is concluded that Fe(II)/Fe(III)/As(V) co-precipitates are quite robust against incidental reducing agent exposure.
Source control on the acid mine drainage produced by the oxidation of pyrite and sulfur-containing uranium tailings based on the microbially induced carbonate precipitation technology

Yao Zhang,Qi Fang,Junwen Lv,Yukui Fu,Jiahua Zhu,Guojian Peng,Mi Li,Xiaoyan Wu,Hongqiang Wang,Zhenyu Chen

DOI: https://doi.org/10.1016/j.jclepro.2023.139444

IF: 11.1

2023-10-27

Journal of Cleaner Production

Abstract:Large quantities of acid mine drainage (AMD) generated through the oxidation of sulfide-bearing minerals, particularly pyrite, pose a significant global environmental challenge. The implementation of efficient and fundamental governance methods is crucial as current conventional approaches fail to address the root cause of this problem. To investigate the technique of controlling AMD at its source, a 10-day static experiment was conducted in order to examine the inhibitory effect of Sporosarcina pasteurii ( S. pasteurii ) on oxidative acid production from pyrite under varying redox potentials (Eh) and Ca 2+ concentrations. Additionally, a 180-day dynamic column experiment was carried out to assess the long-term stability of its inhibition and heavy metal fixation. The results of both short-term and long-term analysis indicate that the metabolic activity of S. pasteurii has beneficial effects on the control of AMD through sulfur oxidation, even in the presence of strong oxidants such as H 2 O 2 and FeCl 3 . 1. It stabilizes pH within the neutral to alkaline range; 2. It maintains Eh at a low potential reducing environment; 3. It promotes an increase in SO 4 2− concentration, followed by a decline and stabilization at lower concentrations; 4. It supplies carbonate for pyrite oxidation, maintaining a balance between acid production and consumption. Additionally, SEM, XRD, and XPS results demonstrated that the mineral surface appeared flat without prominent characteristic peaks of oxidation products, indicating effective inhibition of pyrite oxidation by S. pasteurii . The immobilization experiments for heavy metals showed that Cd exhibited the highest fixation effect with a rate of 94%; Mn, Cu, Zn, and Co had the second best fixation effect with ion concentrations decreasing by 82%, 83%, 87%, and 88% respectively; Ni and U(VI) decreased by rates of 75% and 69% respectively. These experimental findings suggest that S.pasteurii can effectively inhibit pyrite oxidation as well as sulfur-containing uranium waste rock oxidation while providing long-term stabilization for heavy metal immobilization.

environmental sciences,green & sustainable science & technology,engineering, environmental
Immobilization of trace metals by phosphates in contaminated soil near lead/zinc mine tailings evaluated by sequential extraction and TCLP

Wei-Hong Wu,Zheng-Miao Xie,Jian-Ming Xu,Fan Wang,Jia-Chun Shi,Rong-Bin Zhou,Zan-Fang Jin

DOI: https://doi.org/10.1007/s11368-013-0751-x

IF: 3.5361

2013-01-01

Journal of Soils and Sediments

Abstract:Purpose The combined contamination of Pb, Zn, Cu, Cd, and As in the soils near lead/zinc mine waste posed a potential threat to the surrounding environment. Mitigation methods are needed to reduce the environmental risk. The aims of this paper were to evaluate the feasibility and efficiency of different forms of phosphates in remediating combined contamination caused by multi-metals and arsenic near the lead/zinc mining tailings. Materials and methods The tested soil was taken from a clayey illitic thermic typic epiaquepts soil (depth of 0–20 cm) near a lead and zinc mine tailing, located in Shaoxing, Zhejiang Province, China. Four pure chemical reagents, K 2 HPO 4 , Ca(H 2 PO 4 ) 2 .2H 2 O, Ca 3 (PO 4 ) 2 , and Ca 5 (PO 4 ) 3 OH, were added to the soil in solution form as the trace metal stabilizing additives at a P application rate equivalent to 2,283 mg P/kg-soil and P/Pb molar ratio of 1. Shifts in trace metal speciation were determined using sequential extraction procedures and relative toxicities were evaluated using the standard EPA toxicity characteristic leaching procedure (TCLP). Results and discussion The addition of K 2 HPO 4 , Ca 3 (PO 4 ) 2 , Ca 5 (PO 4 ) 3 OH, and Ca(H 2 PO 4 ) 2 .2H 2 O in the contaminated soil at the phosphorus application rate 2,283 mg P/kg-soil reduced Pb concentrations in TCLP extraction solution from 90.47 to 56.05, 83.80, 67.78, and 86.32 mg/kg (38.0, 7.36, 25.1, and 4.59% reduction), respectively. Sequential extraction analysis showed that phosphate treatments caused the transformation of easily available trace metal species to more stable forms. However, TCLP As in the soil increased from its initial value of 0.23 to 2.1, 0.70, 0.67, and 0.77 mg/kg, respectively, for the four treatments. The TCLP leachable As concentration of the K 2 HPO 4 -treated soil was about nine times of that from the untreated soil. Conclusions The addition of K 2 HPO 4 , Ca 3 (PO 4 ) 2 , Ca 5 (PO 4 ) 3 OH, and Ca(H 2 PO 4 ) 2 .2H 2 O were effective in reducing water soluble and exchangeable Pb, Zn, Cu, and Cd, and minimizing TCLP-extractable Pb, Zn, and Cu. The sequential extraction test and the TCLP indicate that Ca 5 (PO 4 ) 3 OH treatment has a higher potential in immobilizing Pb, Zn, Cu, and Cd, though a slight enhancement of As mobility, comparing with other phosphate treatments.
Inhibition of pyrite oxidation through forming biogenic K-jarosite coatings to prevent acid mine drainage production

Maoxin Hong,Jun Wang,Baojun Yang,Yang Liu,Xin Sun,Laishun Li,Shichao Yu,Shitong Liu,Yang Kang,Wei Wang,Guanzhou Qiu

DOI: https://doi.org/10.1016/j.watres.2024.121221

IF: 12.8

2024-01-31

Water Research

Abstract:This study proposes a novel method by forming biogenic K-jarosite coatings on pyrite surfaces driven by Acidithiobacillus ferrooxidans ( A. ferrooxidans ) to reduce heavy metal release and prevent acid mine drainage (AMD) production. Different thicknesses of K-jarosite coatings (0.7 to 1.1 μm) were able to form on pyrite surfaces in the presence of A. ferrooxidans , which positively correlated with the initial addition of Fe 2+ and K + concentrations. The inhibiting effect of K-jarosite coatings on pyrite oxidation was studied by electrochemical measurements, chemical oxidation tests, and bio-oxidation tests. The experimental results showed that the best passivation performance was achieved when 20 mM Fe 2+ and 6.7 mM K + were initially introduced with a bacterial concentration of 4 × 10 8 cells·mL −1 , reducing chemical and biological oxidation by 70% and 98%, respectively (based on the concentration of total iron dissolved into in the solution by pyrite oxidation). Similarly, bio-oxidation tests of two mine waste samples also showed sound inhibition effects, which offers a preliminary demonstration of the potential applicability of this method to actual waste rock. This study presents a new perspective on passivating the oxidation of metal sulfide tailings or waste and preventing AMD.

environmental sciences,engineering, environmental,water resources
Dissolved phosphate decreases the stability of amorphous ferric arsenate and nano-crystalline yukonite

Petra Stubbe,Christian Mikutta,Irena Matulková,Petr Drahota

DOI: https://doi.org/10.1016/j.jhazmat.2024.134374

IF: 13.6

2024-04-30

Journal of Hazardous Materials

Abstract:Extensive research has been conducted on the competitive adsorption of arsenate (AsO 4 3- ) and phosphate (PO 4 3- ) to mineral surfaces, but the stability of ferric arsenate mineral(oid)s under elevated phosphate levels remains poorly understood. Therefore, we investigated the impact of dissolved phosphate (0, 0.5, 50 mM) on the stability of amorphous ferric arsenate (AFA; FeAsO 4 ·nH 2 O) and nano-crystalline yukonite [Ca 2 Fe 3 (AsO 4 ) 3 (OH) 4 ·4H 2 O], both synthetic and contained in natural As-contaminated soil (∼16 g/kg As) and mine-waste material (∼39 g/kg As) for up to one year. Substantial amounts of As (∼45% of total As) were released into solution from AFA and yukonite at high phosphate concentrations due to incongruent dissolution of the solids and substitution of arsenate by phosphate in both mineral(oids). After one year, both solids sequestered ∼8 wt% P with approximately 20–30% accounting for adsorbed and precipitated species. This P increase was also observed in the soil and mine-waste samples, where AFA and yukonite comprised up to 4.3 and 4.9 wt% P, respectively. The high reactivity of ferric arsenates with aqueous phosphate may lead to a substantial overestimation of adsorbed As determined by sequential As extractions of materials containing these phases and requires increased caution when applying phosphate to stabilize polymetallic mine wastes. Furthermore, long-term phosphate additions via fertilization of As-contaminated soil or renaturalized mine tailings containing amorphous or nano-crystalline ferric arsenates should be reduced to limit the export of As(V) into surface streams and groundwater.

environmental sciences,engineering, environmental
Simultaneous removal of para-arsanilic acid and the released inorganic arsenic species by CuFe2O4 activated peroxymonosulfate process

Shengnan Chen,Jing Deng,Cheng Ye,Chengcheng Xu,Lingyi Huai,Jun Li,Xueyan Li

DOI: https://doi.org/10.1016/j.scitotenv.2020.140587

2020-11-01

Abstract:para-arsanilic acid (p-ASA), as a major phenylarsonic feed additive, was used annually in many countries. Once it enters the water environment, p-ASA would be transformed into hypertoxic inorganic arsenic species, causing severe arsenic pollution. In this study, magnetic copper ferrite (CuFe2O4) was applied to activate peroxymonosulfate (PMS) for p-ASA removal and synchronous control of the released inorganic arsenic species. Results showed that CuFe2O4/PMS system presented favorable oxidation ability and close to 85% of 10 mg/L p-ASA was eliminated under the condition of simultaneous dosing 0.2 g/L CuFe2O4 and 1 mM PMS. The rapid decomposition of p-ASA resulted from homogeneous PMS oxidation and the attack of reactive oxygen species (i.e., SO4−, HO and O2−), which was involved the heterogeneous PMS activation through the cycles between Fe(II)/Fe(III) and Cu(II)/Cu(I). Meanwhile, the released inorganic arsenic species during p-ASA degradation were found to be controllable via the adsorption on CuFe2O4 surface and metal hydroxyl groups played the crucial role. CuFe2O4/PMS system exhibited the stable and efficient performance within the broad range of pH 3.0–11.0. The existence of common anions (Cl−, NO3−, HCO3−, SO42−) and humic acid presented the slight inhibition for p-ASA degradation. The reduction of initial p-ASA concentration favored the p-ASA removal. Besides, the catalyst retained a favorable reactivity and stability even after four successive cycles and almost no metal leaching was observed. The rational degradation pathway was mainly involved in the cleavage of AsC bond, oxidation of amino group, substitution and oxidation of hydroxyl group. The transformation of arsenic species could be divided into the release of inorganic arsenic species, the oxidation of As(III) into As(V) and the adsorption of As(V) by CuFe2O4.

environmental sciences
[Consequences of early-stage rheumatoid arthritis].

K. Eberhardt

Abstract:The consequences of early rheumatoid arthritis were studied in a series of patients treated at University Hospital, Lund, during the period 1985-1989. Mean disease duration at enrollment was 12 months. Most of the patients have now been followed prospectively for five years, during which time disease activity and pain have increased markedly. Ability to perform the activities of daily living (ADL) was well maintained, and the level of psychological distress fairly low. Radiographic changes in the hands and feet increased markedly, hand deformity being a common sign of severe disease; and only about ten per cent of the patients remained non-erosive. Another subgroup of ten per cent of the patients manifested rapidly progressive disease, resulting in destruction of larger joints, particularly hip joints, necessitating joint replacement in one or both hips. Eighteen per cent of the patients were in remission at 5-year follow-up. At 2-year follow-up, there was a high (37 per cent) prevalence of work disability, most patients who had had to stop work having done so in the first year. Physically demanding work and difficulties in performing ADL at presentation were the best predictors of subsequent work disability. The disease had a pronounced effect on life style, ability to cope with shopping, housework, leisure activities and social activities being adversely affected in more than half the patients.
Quantitative effects of miopiesin and hyperpiesin on intraocular pressure.

E. Schmerl,B. Steinberg

DOI: https://doi.org/10.1016/0002-9394(55)92252-2

1955-04-01

Abstract:
Inhibition photooxidation of pyrite under illumination via altering photogenerated carrier migration pathways: Role of DTC-TETA surface passivation

Xiaohua Shu,ZiQi Qin,Changda Nie,Dinghua Zhang,Haijie Du,Qian Zhang,Zhi Dang

DOI: https://doi.org/10.1016/j.scitotenv.2024.171988

2024-05-20

Abstract:The oxidation of pyrite is the main cause of acidic mine drainage (AMD), which is a very serious environmental problem in numerous mining areas around the world. Previous studies have shown that passivation agents create a hydrophobic film on the surface of pyrite, effectively isolating oxygen and water. However, the presence of abundant sulfide minerals in tailings ponds may exacerbate AMD when exposed to solar radiation, due to the semiconductor properties of pyrite. It remains uncertain whether the current surface passivation coating can effectively prevent the oxidation of pyrite under light conditions. This paper is the first to investigate the passivation effect as well as the mechanism of surface passivation coating on pyrite under illumination from the perspective of materials science. The results demonstrated that the triethylenetetramine-bisdithiocarbamate (DTC-TETA) passivation coating on pyrite almost completely suppressed the photooxidation of pyrite under illumination by changing the migration path of photogenerated charge carriers. The formation of NC(S)2-Fe chelating groups provides atomic-level interface channels for DTC-TETA to transfer electrons to pyrite and creates a favorable reduction environment for pyrite. Besides, DTC-TETA coating greatly improves the electron-hole pairs recombination efficiency of pyrite, which significantly inhibits the photogenerated electron reduction of oxygen to generate reactive oxygen species (ROS). Moreover, DTC-TETA coating captures the photogenerated holes, avoiding direct oxidation of pyrite by holes. Density functional theory (DFT) calculations revealed that the DTC-TETA coating increases the adsorption energy barrier for oxygen and water. The results extend the existing knowledge on passivation mechanisms on pyrite and hold significant implications for the future screening, evaluation, and practical application of surface passivating agents.
(Bio)dissolution of arsenopyrite coupled with multiple proportions of pyrite: Emphasis on the mobilization and existential state of arsenic

Anni Tang,Jun Wang,Yisheng Zhang,Maoxin Hong,Yang Liu,Baojun Yang

DOI: https://doi.org/10.1016/j.chemosphere.2023.138128

IF: 8.8

2023-02-16

Chemosphere

Abstract:The formation of arsenic-bearing acid mine drainage (AMD) via the oxidation of arsenopyrite refuse ore has attracted significant attention. Pyrite, as main a concomitant mineral, is a crucial factor that affects the (bio)dissolution of arsenopyrite, but there are still some points on the detailed action mechanism under normal environmental conditions that need further study. In this study, the effect mechanism of pyrite with a systematic pyrite content (0, 10, 25, 50, 75, 90, and 100 wt %) on arsenopyrite oxidation and arsenic release in the presence of Acidithiobacillus ferrooxidans was investigated. The X-ray diffraction (XRD), scanning election microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical analyses were also carried out. Results showed that the existence of pyrite and Acidithiobacillus ferrooxidans significantly accelerated the dissolution of arsenopyrite and the oxidation of As (III) to As (V), resulting from the galvanic effect, an increase in the Fe 3+ /Fe 2+ ratio and the oxidation–reduction potential (Eh) value, and a decrease in pH level. As the detected main intermediate products, element sulphur was considered as the dominating obstructive factor during arsenopyrite oxidation, while the added pyrite could accelerate its oxidation. Moreover, a close relationship between different mineral proportions and the galvanic effect was also observed and discussed. Finally, suggestions on AMD governance and source control are proposed.

environmental sciences
Peroxymonosulfate activation by sulfur doped CoFe 2 O 4 rod for arsanilic acid removal: Performance and arsenic enrichment

Hanxuan Zeng,Bufan Yang,Wenfang Shi,Keqi Huang,Cheng Ye,Xiaoyan Ma,Zhijun Wang,Fei Huang,Xueyan Li,Jing Deng

DOI: https://doi.org/10.1016/j.jece.2023.111044

IF: 7.7

2023-09-22

Journal of Environmental Chemical Engineering

Abstract:For a long time, the low toxicity of arsanilic acid ( p -ASA) makes people ignore its potential risk. The highly diffusible and fatal arsenic produced from the decomposition of p -ASA has sounded the alarm for humans. In this study, a rod-like sulfur doped CoFe 2 O 4 (S-CoFe 2 O 4 ) was successfully prepared to activate peroxymonosulfate (PMS) for the p -ASA removal. By adding 40 mg/L S-CoFe 2 O 4 and 0.02 mM PMS, 10 mg/L p -ASA can be thoroughly degraded within 15 min. The pseudo-first-order reaction rate constant was calculated to be 0.37 min −1 , which was 7.4 times that of CoFe 2 O 4 /PMS system (0.05 min −1 ). S-CoFe 2 O 4 /PMS system achieved satisfactory p -ASA removal under acidic, neutral, and alkalescent situations. In addition to the superior p -ASA degradation efficiency, S-CoFe 2 O 4 /PMS system can synchronously immobilize the released arsenic, and 73% of arsenic was adsorbed on S-CoFe 2 O 4 surface. Catalytic mechanism study showed that divalent metal active site, oxygen vacancy, and sulfite were responsible for the generation of reactive oxygen species (ROSs) involving·OH, O 2 ·- , and 1 O 2 . This study proposes a reliable approach for safely removing p -ASA in water, and broadens the application of cobalt ferrite.

engineering, chemical, environmental
A Novel Surface Passivation Method of Pyrite within Rocks in Underwater Environments to Mitigate Acid Mine Drainage at Its Source

Lijun Fan,Tiancheng Han,Xianxing Huang,Yixuan Yang,Tao Zhu,Weiwei Zhai,Daoyong Zhang,Xiangliang Pan

DOI: https://doi.org/10.3390/min14100973

IF: 2.5

2024-09-28

Minerals

Abstract:Mitigating acid mine drainage (AMD) at its source, specifically within rocks containing pyrite in underwater environments, poses a significant environmental challenge worldwide. Existing passivation techniques are primarily designed for open-air conditions, involving direct contact with coating materials at a solid–liquid interface, making them ineffective beneath a water barrier. In this study, we introduce a novel passivation method inspired by the design of underwater bio-adhesives. Tannic acid (TA) combined with polyethylene glycol (PEG) was employed to form a hydrophobic film directly on the pyrite surface, overcoming water resistance and addressing the limitations of current techniques. Electrochemical experiments and chemical leaching experiments were conducted to evaluate the oxidation resistance of the passivating films. TA–PEG-coated pyrite exhibited a lower oxidation rate and a higher static contact angle of 126.2°, achieving suppression efficiencies of 71.6% for total Fe release and 68.1% for total S release. A comprehensive characterization approach, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), was employed to investigate the passivation mechanism. The results of this study may provide new insights into the preparation of simpler and greener passivating agents to suppress pyrite oxidation at its source in underwater environments.

geochemistry & geophysics,mineralogy,mining & mineral processing
Removal and immobilization of arsenic from copper smelting wastewater using copper slag by in situ encapsulation with silica gel

Yongkui Li,Xing Zhu,Xianjin Qi,Bo Shu,Xin Zhang,Kongzhai Li,Yonggang Wei,Hua Wang

DOI: https://doi.org/10.1016/j.cej.2020.124833

IF: 15.1

2020-08-01

Chemical Engineering Journal

Abstract:Ferric arsenate is an important arsenic-containing compound in the mining-impacted environment and hydrometallurgical tailings, especially in the disposal of smelting wastewater in nonferrous smelting industries. It acts as an intermediate for arsenic removal and immobilization in the disposal of arsenic-containing wastewater. However, amorphous ferric arsenate suffers from poor stability with a high arsenic leachability in the aqueous environment. In this study, we develop a new strategy to remove and immobilize arsenic from copper smelting wastewater using copper slag through an in situ encapsulation of ferric arsenate with silica gel. The strategy provides an inherent arsenic disposal solution for copper smelting processes, allowing the removal of arsenic in the form of environmentally friendly precipitates. The results show copper slag mainly composed of Fe2SiO4 and Fe3O4 can be dissolved in copper smelting wastewater containing high sulfuric acid and arsenic, providing abundant Fe3+ ions and silicates for the following arsenic precipitation. In the room-temperature solid-liquid reaction between copper slag and wastewater, the Fe-As co-precipitation and the in situ encapsulation results in an environmentally stable and core-shell structured precipitate consisting of an amorphous ferric arsenate core and a silica gel shell. Copper slag achieves an arsenic removal efficiency of 98.85% and an arsenic removal capacity of 66.86 mg/g in the disposal of smelting wastewater with an initial arsenic concentration of 8458 mg/L. The findings and proposed strategy demonstrates the potential for the efficient and affordable disposal of arsenic-containing wastewater.

engineering, chemical, environmental
Stabilization of calcium arsenic residues via the formation of ferrous/ferric arsenate

Yumeng Wang,Jiaxi Zhang,Shaofeng Wang,Xiangfeng Zeng,Xin Wang,Peiwen Zhang,Yu Song,Danni Zhang,Yongfeng Jia

DOI: https://doi.org/10.1016/j.cej.2023.143294

IF: 15.1

2023-05-11

Chemical Engineering Journal

Abstract:This work proposed an in-situ method for stabilizing the hazardous calcium arsenic residues (CARs) by introducing small amounts of ferrous (Fe II ) solution to induce the formation of stable ferrous arsenate minerals. The CARs collected from a copper smelter in China were treated with Fe II solution at room temperature, Fe II /As molar ratios of 0.5–2 and pH 6–9 under both oxic and anoxic conditions, and the concentrations of aqueous arsenic (As) was monitored during the whole treatment process (up to 760 days). Results showed that As dissolution was significantly inhibited after addition of Fe II into the CARs slurries. The concentration of dissolved As was lowered to < 2.0 mg/L from initially ∼ 1000 mg/L at pH 6 and 7, and Fe II /As ≥ 1. The resultant solids under these conditions showed TCLP As concentrations of < 1.0 mg/L, which were dramatically lower than that of untreated CARs (862 mg/L). Characterization with X-ray powder diffraction (XRD), scanning/transmission electron microscopy (SEM/TEM), and X-ray absorption spectroscopy (XAS) of the resultant solids revealed that the formation of ferrous arsenates minerals (parasymplesite and/or ferrisymplesite) was the mechanism of the stabilization effects. The Fe II treatment method proposed in this work provides an alternative option for in-situ CARs stabilization.

engineering, chemical, environmental
Arsenic and iron speciation and mobilization during phytostabilization of pyritic mine tailings

Corin M Hammond,Robert A Root,Raina M Maier,Jon Chorover

DOI: https://doi.org/10.1016/j.gca.2020.07.001

2020-10-01

Abstract:Particulate and dissolved metal(loid) release from mine tailings is of concern in (semi-) arid environments where tailings can remain barren of vegetation for decades and, therefore, become highly susceptible to dispersion by wind and water. Erosive weathering of metalliferous tailings can lead to arsenic contamination of adjacent ecosystems and increased risk to public health. Management via phytostabilization with the establishment of a vegetative cap using organic amendments to enhance plant growth has been employed to reduce both physical erosion and leaching. However, prior research suggests that addition of organic matter into the oxic weathering zone of sulfide tailings has the potential to promote the mobilization of arsenate. Therefore, the objective of the current work was to assess the impacts of phytostabilization on the molecular-scale mechanisms controlling arsenic speciation and lability. These impacts, which remain poorly understood, limit our ability to mitigate environmental and human health risks. Here we report on subsurface biogeochemical transformations of arsenic and iron from a three-year phytostabilization field study conducted at a Superfund site in Arizona, USA. Legacy pyritic tailings at this site contain up to 3 g kg-1 arsenic originating from arsenopyrite that has undergone oxidation to form arsenate-ferrihydrite complexes in the top 1 m. Tailings were amended in the top 20 cm with 100, 150, or 200 g kg-1 (300-600 T ha-1) of composted organic matter and seeded with native halotolerant plant species. Treatments and an unamended control received irrigation of 360 ± 30 mm y-1 in addition to 250 ± 160 mm y-1 of precipitation. Cores to 1 m depth were collected annually for three years and sectioned into 20 cm increments for analysis by synchrotron iron and arsenic X-ray absorption spectroscopy (XAS) coupled with quantitative wet chemical and mass balance methods. Results revealed that > 80% of arsenic exists in ammonium oxalate-extractable and non-extractable phases, including dominantly ferrihydrite and jarosite. Arsenic release during arsenopyrite oxidation resulted in both downward translocation and As(V) attenuation by stable Fe(III)(oxyhydr)oxide and Fe(III) (hydroxy)sulfate minerals over time, highlighting the need for sampling at multiple depths and time points for accurate interpretation of arsenic speciation, lability, and translocation in weathering profiles. Less than 1% of total arsenic was highly-labile, i.e. water-extractable, from all treatments, depths, and years, and more than 99% of arsenate released by arsenopyrite weathering was attenuated by association with secondary minerals. Although downward translocation of both arsenic and iron was detected during phytostabilization by temporal enrichment analysis, a similar trend was measured for the uncomposted control, indicating that organic amendment associated with phytostabilization practices did not significantly increase arsenic mobilization over non-amended controls.
Arsenopyrite dissolution in circumneutral oxic environments: The effect of pyrophosphate and dissolved Mn(III)

Xingxing Wang,Zhipeng Shu,Haohua He,Ming Zhou,Xiaohan Lu,Jiajia Wang,Liwu Zhang,Zezhen Pan,Zimeng Wang

DOI: https://doi.org/10.1016/j.watres.2023.119595

IF: 12.8

2023-01-01

Water Research

Abstract:The oxidative dissolution of As from arsenopyrite, one important arsenic mineral in reducing conditions, poses an environmental hazard to natural aquatic systems. The dissolution of arsenopyrite occurs slowly due to the surface precipitates of iron oxides in circumneutral oxic environments. However, the presence of natural ligands and coexisting metals may change the release of Fe species, which would be of critical importance to the dissolution of arsenopyrite. Here, we investigated the oxidative dissolution of arsenopyrite induced by pyrophosphate (PP) and dissolved Mn(III) species as a natural occurring Mn species with strong complexation affinity to PP. With the presence of PP, the formation of Fe(II)-PP complexes and its rapid oxidation to dissolved Fe(III)-PP species resulted in a substantial increase in the generation of hydroxyl radicals (center dot OH) under ambient dark conditions, contributing to faster dissolution of arsenopyrite and higher percentage of As(V) in the dissolved products. Dissolved Mn(III), though considered as an extra oxidant besides oxygen, unexpectedly acted as a radical scavenger for center dot OH and inhibited the production of As(V). Moreover, the oxidation of sulfur species differed in the two systems as significant formation of thiosulfate was observed with the presence of PP, which did not occur in the system with dissolved Mn(III). Overall, the effects of dissolved Mn(III) and PP on the dissolution of arse-nopyrite and the subsequent transformation of Fe, As and S species have important implications for disentangling the interactions among these metastable elements, and for assessing their transport and environmental impacts in aquatic systems.

Activity of acid phosphatase in the cerebrospinal fluid of children.

Formation of surface protective coatings on arsenopyrite using Al-catecholate complex and its mode of inhibition of arsenopyrite oxidation

Immobilization of arsenic in tailing by using iron and hydrogen peroxide

Performance and Mechanisms of PropS-SH/HA Coatings in the Inhibition of Pyrite Oxidation

Transformation of Arsenic During Realgar Tailings Stabilization Using Ferrous Sulfate in a Pilot-Scale Treatment.

Stability of continuously produced Fe(II)/Fe(III)/As(V) co-precipitates under periodic exposure to reducing agents

Source control on the acid mine drainage produced by the oxidation of pyrite and sulfur-containing uranium tailings based on the microbially induced carbonate precipitation technology

Immobilization of trace metals by phosphates in contaminated soil near lead/zinc mine tailings evaluated by sequential extraction and TCLP

Inhibition of pyrite oxidation through forming biogenic K-jarosite coatings to prevent acid mine drainage production

Dissolved phosphate decreases the stability of amorphous ferric arsenate and nano-crystalline yukonite

Simultaneous removal of para-arsanilic acid and the released inorganic arsenic species by CuFe2O4 activated peroxymonosulfate process

[Consequences of early-stage rheumatoid arthritis].

Quantitative effects of miopiesin and hyperpiesin on intraocular pressure.

Inhibition photooxidation of pyrite under illumination via altering photogenerated carrier migration pathways: Role of DTC-TETA surface passivation

(Bio)dissolution of arsenopyrite coupled with multiple proportions of pyrite: Emphasis on the mobilization and existential state of arsenic

Peroxymonosulfate activation by sulfur doped CoFe 2 O 4 rod for arsanilic acid removal: Performance and arsenic enrichment

A Novel Surface Passivation Method of Pyrite within Rocks in Underwater Environments to Mitigate Acid Mine Drainage at Its Source

Removal and immobilization of arsenic from copper smelting wastewater using copper slag by in situ encapsulation with silica gel

Stabilization of calcium arsenic residues via the formation of ferrous/ferric arsenate

Arsenic and iron speciation and mobilization during phytostabilization of pyritic mine tailings

Arsenopyrite dissolution in circumneutral oxic environments: The effect of pyrophosphate and dissolved Mn(III)