Stability of arsenate-bearing Fe(III)/Al(III) co-precipitates in the presence of sulfide as reducing agent under anoxic conditions

Christoph Doerfelt,Thomas Feldmann,Ranjan Roy,George P Demopoulos

DOI: https://doi.org/10.1016/j.chemosphere.2016.02.087

IF: 8.8

Chemosphere

Abstract:Currently, the co-precipitation of arsenate with ferric iron at molar ratios Fe(III)/As(V) ≥ 3 by lime neutralization produces tailings solids that are stable under oxic conditions. However not much is known about the stability of these hazardous co-precipitates under anoxic conditions. These can develop in tailings storage sites by the action of co-discharged reactive sulfides, organic reagent residuals or bacterial activity. The ferric matrix can then undergo reductive dissolution reactions, which could release arsenic into the pore water. Co-ions like aluminum could provide a redox-immune sink to scavenge any mobilized arsenic as a result of reduction of ferric. As such, in this work Fe(III)/As(V) = 4 and aluminum substituted Fe(III)/Al(III)/As(V) = 2/2/1 co-precipitates were produced in a mini continuous co-precipitation process circuit and subjected to excess sulfide addition under inert gas to evaluate their stability. It was found that the ferric-arsenate co-precipitate could retain up to 99% (30 mg/L in solution) of its arsenic content despite the high pH (10.5) and extremely reducing (Eh < -200 mV) environment. There was no significant reduction of arsenate and only 45% of ferric iron was reduced. Partial aluminum substitution was found to cut the amount of mobilized arsenic by 50% (down to 15 mg/L) hence mixed Fe(III)/Al(III)-arsenate co-precipitates may offer better resistance to reductive destabilization over the long term than all iron co-precipitates.