Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Patterning Liquid-Crystal Alignment for Ultrathin Flat Optics

Applications of liquid crystal planer optical elements based on photoalignment technology in display and photonic devices

Liquid-Crystal Photoalignment by Super Thin Azo Dye Layer

Substrate Patterning For Liquid Crystal Alignment By Optical Interference

Freeform Liquid–Crystal Polarization Imaging Optics: A Practical Approach from Design to Fabrication

Cost-effective photolithography-based dual liquid crystal alignment for versatile electro-optic applications

Large aperture and defect-free liquid crystal planar optics enabled by high-throughput pulsed polarization patterning

Research and Application: Liquid Crystal Devices Fabricated by Single-Exposure Photoalignment

Photoalignment Enabled Liquid Crystal Microstructures for Optics and Photonics

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Flat Multifunctional Liquid Crystal Elements Through Multi-Dimensional Information Multiplexing

Planar Liquid Crystal Optics for Simultaneously Surface Displaying and Diffraction-Limited Focusing

Liquid‐Crystal‐Mediated Geometric Phase: From Transmissive to Broadband Reflective Planar Optics

Compartmentalized Out-of-Plane Alignment of Liquid Crystals Based on Femtosecond Laser Direct Writing and Its Applications

Fabrication of Liquid Crystal Gratings Based on Photoalignment Technology

Arbitrary photo-patterning in liquid crystal alignments using DMD based lithography system

Some Progresses of Photoalignment Technique Applied in Liquid Crystal Nondisplay Field

Optical Field Control Via Liquid Crystal Photoalignment

Tailoring complex optical fields via anisotropic microstructures (Presentation Recording)

Photoalignment-induced Two-Dimensional Liquid Crystal Polarization Structure Via Multi-Beam Polarization Interferometry.

Liquid Crystal Photoalignment Technique: Basics, Developments, and Flexible/stretchable Device Applications