Abstract:Mg metal anode‐based battery is a more sustainable, lower cost, and higher energy density alternative to Li‐ion. Here, significant improvement in terms of Mg plating kinetics is achieved by using low Mg(TFSI)2 concentration, addition of Mg(butyl)2 and Ti substrate with similar crystal structure and lattice parameter as Mg leading to lower nucleation overpotential. Mg metal anode‐based battery is a more sustainable, lower cost, and higher energy density alternative to Li‐ion. However, this battery chemistry also faces several challenges associated with the high charge density of Mg2+, including achieving high reversibility and low voltage hysteresis for Mg metal plating/stripping. While significant improvements are achieved in last decades, they involve rather complex electrolyte formulations and/or Mg salts difficult to produce, and the use of unpractical substrates such as platinum. Here, significant improvement in terms of Mg plating kinetics is achieved in electrolytes containing commercial magnesium bis(trifluoromethanesulfonyl)imide salt (Mg(TFSI)2) by using titanium substrate with similar crystal structure and lattice parameter as Mg leading to lower nucleation overpotential. Low salt concentration electrolyte and addition of dibutyl magnesium (Mg(butyl)2) also enable the formation of thinner interphase, richer in solvent based decomposition products, further improving Mg plating kinetics. This work highlights the complex role of Mg(butyl)2, often considered as a simple drying agent, and how it impacts ion solvation favoring the mobility of electroactive cationic species, paving the way toward better electrolyte design with improved cation transference number.

Optimizing interfacial process of Mg metal anode by porphyrin adsorption layer in Cl-free conventional electrolyte

Tailoring a Hybrid Functional Layer for Mg Metal Anodes in Conventional Electrolytes with a Low Overpotential

Building Organic–Inorganic Robust Interphases from Deep Eutectic Solution for Highly Stable Mg Metal Anode in Conventional Electrolyte

An artificial interphase enables the use of Mg(TFSI)<sub>2</sub>-based electrolytes in magnesium metal batteries

Surface Engineering of a Mg Electrode via a New Additive to Reduce Overpotential

A Comprehensive Study on the Parameters Affecting Magnesium Plating/Stripping Kinetics in Rechargeable Mg Batteries

Rechargeable Mg Metal Batteries Enabled by a Protection Layer Formed in Vivo

Interfacial Engineering of Magnesiophilic Coordination Layer Stabilizes Mg Metal Anode

Tailoring Electrode–Electrolyte Interface Using an Electron‐Deficient Borate‐Based Additive in MgTFSI2‐MgCl2/DME Electrolyte for Rechargeable Magnesium Batteries

Extending Cycle Life of Mg/S Battery by Activation of Mg Anode/Electrolyte Interface Through an LiCl‐Assisted MgCl2 Solubilization Mechanism

Tailoring Coordination in Conventional Ether‐Based Electrolytes for Reversible Magnesium‐Metal Anodes

Enabling Magnesium Anodes by Tuning the Electrode/Electrolyte Interfacial Structure

Bifunctional Non-Nucleophilic Electrolyte Enables Long-Life Magnesium Batteries Via Elimination of Passive Film on Mg Anode

An Electrochemically Polymerized Protective Layer for a Magnesium Metal Anode

High‐entropy Electrolyte Enables High Reversibility and Long Lifespan for Magnesium Metal Anodes

Passivation Layers in Mg‐metal Batteries: Robust Interphases for Li‐metal Batteries

Enabling Mg Metal Anodes Rechargeable in Conventional Electrolytes by Fast Ionic Transport Interphase

Superior plating/stripping performance through constructing an artificial interphase layer on metallic Mg anode

Three-Dimensional Magnesiophilic Scaffolds for Reduced Passivation towards High-Rate Mg Metal Anodes in a Non-Corrosive Electrolyte.

Enhancing Reversibility and Stability of Mg Metal Anodes: High-Exposure (002) Facets and Nanosheet Arrays for Superior Mg Plating/Stripping

Tetraphenylporphyrin-based Chelating Ligand Additive As a Molecular Sieving Interfacial Barrier Toward Durable Aqueous Zinc Metal Batteries.