Abstract:The lithium ion battery, a most popular battery technology powering much of our digital and mobile lifestyle, has posed limitations for wider future use, mainly because of concerns raised over their cost, safety, and environmental impact. Most of these concerns come from its use of organic electrolytes that are viscous, flammable, and toxic, as well as the high price of lithium due to the limited lithium sources. Hence, tremendous research efforts have been devoted to the study of aqueous electrolytes, attributed to its being safe, convenient, inexpensive, more durable and less prone to thermal runaways. Its higher ionic conductivity combined with simplicity of the chemistry environment may facilitate long cycle life of the battery too. Moreover, non-metallic charge carriers such as ammonium (NH 4 + ) ions have attracted much attention, due to the following great merits: (i) favorable sustainability and nontoxicity as it could be synthesized from infinite or unlimited sources (nitrogen and hydrogen in air); (ii) a lighter mass of 18 mAh/g for high energy density batteries; (iii) the smallest hydration radius of 3.31 Å (despite its large ionic radius of 1.48 Å) leading to fast ion diffusion in the electrolyte; (iv) the nonmetallic interaction between NH 4 + carriers and host materials (e.g., hydrogen bond) is more flexible than the rigid metal coordination; (v) nondiffusion-controlled topochemistry between nonmetallic charging carriers and electrode framework during insertion/extraction process leading to pseudo-capacitive-dominated behavior and thus ultrafast kinetics. Nevertheless, a challenge associated with the development of high-performance ammonium ion batteries (AIBs) is that the large ionic radius of NH 4 + requires host materials with larger interlayer spacing or open structure for accommodation and thus limits the choice of electrode materials. In this work, we employ facile solution processing methods to synthesize various nanostructured electrode materials ranging from oxides to polymer and composite to improve the electrochemical performance of AIBs. Examples include ammonium vanadate, vanadium oxide, polyaniline, and composite consisting of vanadium oxide and polyaniline. For example, a facile in-situ intercalation approach is utilized to prepare a composite material with polyaniline (PANI) intercalated in the interlayers of hydrated V 2 O 5 , for application as the electrode in high-performance AIBs. It is found that the interlayer spacing of hydrated V 2 O 5 is expanded to 13.99Å, offering wide channels to accommodate NH 4 + ions during intercalation/deintercalation processes. The resulted AIB exhibits a high capacity of 192.5 mAh/gwhen cycled at a specific current of 1 A/g and retains 39 mAh/g at an extremely specific current of 20 A/g, together with stable cycle life. The diffusion kinetics of the NH 4 + ions, influenced by the hydrogen bonds formed between NH 4 + ion and O 2- in the host structure, is effectively enhanced by the unique π-conjugated structure of PANI, leading to high capacity, improved rate capability and improved cycle life of AIBs. This PANI-intercalated V 2 O 5 (PVO) electrode material demonstrates stable and ultrafast NH 4 + ion storage, as revealed by X-ray and Raman spectroscopy characterizations. The performance of AIBs can be further maximized by optimizing the composition of PVO electrodes or the ratio between PANI and hydrated vanadium oxide. Additionally, different aqueous liquid-state electrolytes and hydrogel electrolytes with composition tuned are tested in AIBs, for enhanced cycleability and stability of the batteries. As such, this study opens a new horizon by developing various electrode/electrolyte materials to boost the performance of aqueous ammonium-ion batteries that have great potential for next-generation safe and low-cost electrochemical energy storage.

Rocking-chair ammonium ion battery with high rate and long-cycle life

Ethanediamine Intercalation Induced Hydrogen Bond Network in Vanadium Oxide for Ultralong‐Life Aqueous Ammonium Ion Batteries

Concentrated electrolytes enabling stable aqueous ammonium‐ion batteries

Tailoring Electrodes and Electrolytes in Emerging Aqueous Ammonium-Ion Batteries for Enhanced Performance

Coupling dual metal active sites and low-solvation architecture toward high-performance aqueous ammonium-ion batteries

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

MnAl Layered Double Hydroxides: A Robust Host for Aqueous Ammonium‐Ion Storage with Stable Plateau and High Capacity

An Aqueous Rechargeable Copper Ammonium Hybrid Battery with Good Cycling Performance

Engineering A High-Energy-Density And Long Lifespan Aqueous Zinc Battery Via Ammonium Vanadium Bronze

A rocking-chair aqueous aluminum-ion battery based on organic/inorganic electrode

Aqueous rechargeable ammonium ion battery based on the MoS2/MXene with ball-flower morphology as anode and NH4V4O10 with layered structure as cathode

Hydrogen Bond-Assisted Ultra-Stable and Fast Aqueous NH4+ Storage

Oxygen Vacancy-Enriched Bi2SeO5 Nanosheets with Dual Mechanism for Ammonium-Ion Batteries

Copper hexacyanoferrate as ultra-high rate host for aqueous ammonium ion storage

An Ultrastable Aqueous Ammonium‐Ion Battery Using a Covalent Organic Framework Anode

In Situ Electrochemical Transformation Reaction of Ammonium-Anchored Heptavanadate Cathode for Long-Life Aqueous Zinc-Ion Batteries

Research Development on Aqueous Ammonium‐Ion Batteries

Alloxazine as anode material for high-performance aqueous ammonium-ion battery

One Pot Synthesis of Ammonium Rich Nickel Hexacyanoferrate As Stable Cathode Material for Ammonium‐Ion Batteries

A rocking-chair aqueous aluminum-ion battery based on an organic/inorganic electrode.

Ammonium Intercalation Engineering Regulated Structural Stability of V6O13 Cathodes for Durable Zinc Ion Batteries