Abstract:A sensitive non-contact sensing system based on the CoFeNiSiB amorphous ribbon giant magnetoimpedance (GMI) effect is proposed for current testing. The sensing system consists of a GMI probe, a sinusoidal current generator, a voltage follower, a preamplifier, a low-pass filter, and a peak detector. Four different GMI probes derived from amorphous ribbon meanders are designed and fabricated through MEMS processes. GMI probes were driven by a 10 MHz, 5 mA AC current. A permanent magnet was used to provide a bias magnetic field for the probe. The effect of the bias magnetic field on the output DC voltage was investigated. This non-contact current sensing system exhibits good sensitivity and linearity at a bias magnetic field Hbias = 15 Oe. The sensitivity can reach up to 24.2 mV/A in the ±1.5 A range.
chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
What problem does this paper attempt to address?
The problem this paper attempts to address is the development of a non-contact current sensing system based on the giant magnetoimpedance (GMI) effect of CoFeNiSiB amorphous ribbons. Specifically, the researchers designed and fabricated four different structures of GMI probes using MEMS technology. These probes are used to detect the magnetic field generated by the measured current, thereby achieving non-contact measurement of the current.
### Main Issues
1. **Improving the sensitivity and linearity of current sensors**: Existing current sensors have limitations in terms of sensitivity, size, and miniaturization. This study aims to improve the performance of current sensors by using amorphous ribbon probes with a high GMI ratio.
2. **Non-contact measurement**: Traditional contact-based current measurement methods have issues with low accuracy and complex operation. This study proposes a non-contact current sensing system based on the GMI effect to overcome these problems.
3. **Optimizing the design of GMI probes**: By designing and fabricating GMI probes with different structures, the study investigates their performance under different bias magnetic fields to find the optimal design.
### Solutions
1. **Design and fabrication of GMI probes**: Using commercial CoFeNiSiB amorphous ribbons, four different structures of GMI probes were fabricated using MEMS technology.
2. **System composition**: The current sensing system includes a GMI probe, a sine wave current generator, a voltage follower, a preamplifier, a low-pass filter, and a peak detector.
3. **Experimental validation**: The system's performance was validated through experiments, particularly showing good sensitivity and linearity at a bias magnetic field of 15 Oe, with a sensitivity reaching 24.2 mV/A (within the range of ±1.5 A).
### Key Technologies
- **Giant Magnetoimpedance (GMI) Effect**: Utilizing the significant change in AC impedance of amorphous ribbons under an external magnetic field.
- **MEMS Technology**: Used to fabricate high-precision GMI probes.
- **Signal Processing Circuit**: Includes a voltage follower, preamplifier, low-pass filter, and peak detector to improve signal quality and stability.
### Application Prospects
The non-contact current sensing system proposed in this study has broad application prospects in fields such as power electronic systems, industrial automation, and medical devices, especially in scenarios requiring high precision, low power consumption, and non-contact measurement.