Correction to "Preliminary Investigations of an Opposed Rotary Piston Compressor for the Air Feeding of a Polymer Electrolyte Membrane Fuel Cell System"

Shikai Xing,Jianbing Gao,Guohong Tian,Meng Zhao,Chaochen Ma

DOI: https://doi.org/10.1021/acsomega.0c04803

IF: 4.1

2020-10-16

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.0c03347.].

What problem does this paper attempt to address?

Correction: in Situ Study of the Catalytic Mechanism for the Oxygen Reduction Reaction on a Polypyrrole Modified Carbon Supported Cobalt Hydroxide Cathode in Direct Borohydride Fuel Cells.

Haiying Qin,Juan Wang,Jiabin Liu,Yan He,Zhou Peng Li,Shuai Yan,Aiguo Li,Xiaohan Yu

DOI: https://doi.org/10.1039/c4cp90184c

2015-01-01

Abstract:Correction for 'In situ study of the catalytic mechanism for the oxygen reduction reaction on a polypyrrole modified carbon supported cobalt hydroxide cathode in direct borohydride fuel cells' by Haiying Qin et al., Phys. Chem. Chem. Phys., 2013, 15, 9070-9074.
Preliminary Investigations of an Opposed Rotary Piston Compressor for the Air Feeding of a Polymer Electrolyte Membrane Fuel Cell System

Shikai Xing,Jianbing Gao,Guohong Tian,Meng Zhao,Chaochen Ma

DOI: https://doi.org/10.1021/acsomega.0c03347

IF: 4.1

2020-09-19

ACS Omega

Abstract:Automotive polymer electrolyte membrane fuel cell systems are attracting much attention, driven by the requirements of low automotive exhaust emissions and energy consumption. A polymer electrolyte membrane fuel cell system provides opportunities for the developments in different types of air compressors. This paper proposed an opposed rotary piston compressor, which had the merits of more compact structures, less movement components, and a high pressure ratio, meeting the requirements of polymer electrolyte membrane fuel cell systems. Preliminary performance evaluations of the opposed rotary piston compressor were conducted under various scenarios. This will make a foundation for optimizations of outlet pipe layouts of the compressor. A three-dimensional numerical simulation approach was used; further, in-cylinder pressure evolutions, fluid mass flow rates, and P-V diagrams were analyzed. It indicated that the cyclic period of the opposed rotary piston compressor was half of reciprocating piston compressors. The specific mass flow rate of the compressor is in the range of 0.094-0.113 kg·(s·L)-1 for the given scenarios. Outlet ports 1 and 2 dominated the mass flow in the discharge process under scenarios 1, 3, and 4. In-cylinder pressure profiles show multipeaks for all of these scenarios. In-cylinder pressure increased rapidly in the compression process and part of the discharge process, which led to high energy consumption and low adiabatic efficiency. The maximum adiabatic efficiency is approximately 43.96% among the given scenarios.
Correction to “Investigating the Effect of a Diesel-Refined Crude Palm Oil Methyl Ester–Hydrous Ethanol Blend on the Performance and Emissions of an Unmodified Direct Injection Diesel Engine”

Jarernporn Thawornprasert,Wiriya Duangsuwan,Krit Somnuk

DOI: https://doi.org/10.1021/acsomega.3c01760

IF: 4.1

2023-04-10

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.2c07537.].

chemistry, multidisciplinary
Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Xun Jiao,Xiaoxia Tang,Jinrui Li,Yujiao Xiang,Cunpu Li,Cheng Tong,Minhua Shao,Zidong Wei

DOI: https://doi.org/10.1039/d4sc90096k

IF: 8.4

2024-01-01

Chemical Science

Abstract:[This corrects the article DOI: 10.1039/D4SC02420F.].
Correction to Conceptual Process Design and Technoeconomic Analysis of an e-Methanol Plant with Direct Air-Captured CO2 and Electrolytic H2

Fabio Cameli,Evangelos Delikonstantis,Afroditi Kourou,Victor Rosa,Kevin M Van Geem,Georgios D Stefanidis

DOI: https://doi.org/10.1021/acs.energyfuels.4c03268

2024-07-15

Abstract:[This corrects the article DOI: 10.1021/acs.energyfuels.3c04147.].
Correction to "Low-Temperature Structural Battery Electrolytes Produced by Polymerization-Induced Phase Separation"

Sayyam Deshpande,Vishaal Vidyaprakash,Suyash Oka,Smita S Dasari,Kai-Wei Liu,Chen Wang,Jodie L Lutkenhaus,Micah J Green

DOI: https://doi.org/10.1021/acsapm.4c02519

2024-09-04

Abstract:[This corrects the article DOI: 10.1021/acsapm.4c00485.].
Corrigendum to “activity, Performance, and Durability for the Reduction of Oxygen in PEM Fuel Cells, of Fe/N/C Electrocatalysts Obtained from the Pyrolysis of Metal-Organic-Framework and Iron Porphyrin Precursors” [electrochimica Acta 159 (2015) 184–197]

Lijun Yang,Nicholas Larouche,Régis Chénitz,Gaixia Zhang,Michel Lefèvre,Jean‐Pol Dodelet

DOI: https://doi.org/10.1016/j.electacta.2015.02.221

IF: 6.6

2015-01-01

Electrochimica Acta

Abstract:The authors regret On, lines 79 to 88) This is the text which was published. From the durability experiments performed in H2/O2 or in H2/Air fuel cells, one may therefore conclude that even the most stable nonPGM catalysts is still a long way from delivering powers comparable to that delivered in the same conditions and for several thousands of hours by Pt. Indeed, at 0.4V and with a loading of 0.3mg Pt cm−2 at the cathode, a H2/Air PEM fuel cell delivers 3.4 A cm−2 (and therefore 1.36W cm−2) using a Nafion NR211 membrane, 15 psi of backpressure of fully humidified H2 and O2 fed at 0.3 lpm to the anode and the cathode of the MEA. Below is the text that should correct it. What has been changed or added is now in bold. From the durability experiments performed in H2/O2 or in H2/Air fuel cells, one may therefore conclude that even the most stable nonPGM catalysts is still a long way from delivering powers comparable to that delivered in the same conditions and for several thousands of hours by Pt. Indeed, at 0.4V and with a loading of 0.3mg Pt cm−2 at the cathode, a H2/O2 PEM fuel cell delivers 3.4 A cm−2 (and therefore 1.36W cm−2) using a Nafion NR211 membrane, 15 psi of backpressure of fully humidified H2 and O2 fed at 0.3 lpm to the anode and the cathode of theMEA,while a H2/Air PEM fuel cell delivers 2.3 A cm−2 (and therefore 0.92W cm-2) in the same experimental conditions. The authors would like to apologise for any inconvenience caused.
Correction to “Kinetics on Li Deintercalation in Mg- or Li-Doped SiO/Graphite Composite Anodes for Li Ion Batteries: Dopant Effect”

Joonhyeon Kang,Kyunil Rah,Sumin Lee,Se Mi Park

DOI: https://doi.org/10.1021/acs.jpcc.3c07288

2023-11-21

The Journal of Physical Chemistry C

Abstract:[This corrects the article DOI: 10.1021/acs.jpcc.3c05124.].

chemistry, physical,nanoscience & nanotechnology,materials science, multidisciplinary
Erratum: Numerical Simulation of An Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures [ECS Trans. 103 (1) 883-892 (2021)]

Junhua Fan,Yuqing Wang,Jixin Shi,Yixiang Shi,Haishan Cao,Ningsheng Cai

DOI: https://doi.org/10.1149/10301.2259ecst

2021-01-01

Abstract:In the Acknowledgement, the following sentence "The authors acknowledge the Project (218YFB1502201) supported by National Key R&D Program of China" should be changed to "The authors acknowledge the Project (2018YFB1502201) supported by National Key R&D Program of China".
Corrigendum to “Mussel-inspired nanozyme catalyzed conductive and self-setting hydrogel for adhesive and antibacterial bioelectronics” [Bioact. Mater. 6 (2021) 2676–2687 / 452]

Zhanrong Jia,Xuanhan Lv,Yue Hou,Kefeng Wang,Fuzeng Ren,Dingguo Xu,Qun Wang,Kelong Fan,Chaoming Xie,Xiong Lu

DOI: https://doi.org/10.1016/j.bioactmat.2022.11.021

IF: 18.9

2023-05-01

Bioactive Materials

Abstract:[This corrects the article DOI: 10.1016/j.bioactmat.2021.01.033.].

engineering, biomedical,materials science, biomaterials
Correction: Optimization of misfit calcium cobaltite oxygen electrodes for solid oxide fuel cells through electrospinning processing

Allan J. M. Araújo,Itzhak I. Maor,Laura I. V. Holz,Meirav Mann-Lahav,Vadim Beilin,Armin Feldhoff,Gideon S. Grader,Francisco J. A. Loureiro

DOI: https://doi.org/10.1039/d4ta90182g

IF: 11.9

2024-10-03

Journal of Materials Chemistry A

Abstract:Correction for 'Optimization of misfit calcium cobaltite oxygen electrodes for solid oxide fuel cells through electrospinning processing' by Allan J. M. Araújo et al. , J. Mater. Chem. A , 2024, https://doi.org/10.1039/D4TA04085F.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Correction: Rehman et al. Nanocomposite Membranes for PEM-FCs: Effect of LDH Introduction on the Physic-Chemical Performance of Various Polymer Matrices. Polymers 2023, 15, 502

Muhammad Habib Ur Rehman,Ernestino Lufrano,Cataldo Simari

DOI: https://doi.org/10.3390/polym16182673

IF: 5

2024-09-23

Polymers

Abstract:Polymers, Vol. 16, Pages 2673: Correction: Rehman et al. Nanocomposite Membranes for PEM-FCs: Effect of LDH Introduction on the Physic-Chemical Performance of Various Polymer Matrices. Polymers 2023, 15, 502 Polymers doi: 10.3390/polym16182673 Authors: Muhammad Habib Ur Rehman Ernestino Lufrano Cataldo Simari Error in Figure [...]

polymer science
Erratum: Improving a Mg/S Battery with YCl 3 Additive and Magnesium Polysulfide.

Yan Xu,Guangmin Zhou,Shuyang Zhao,Wanfei Li,Feifei Shi,Jia Li,Jun Feng,Yuxing Zhao,Yang Wu,Jinghua Guo,Yi Cui,Yuegang Zhang

DOI: https://doi.org/10.1002/advs.201903603

2020-01-01

Abstract:[This corrects the article DOI: 10.1002/advs.201800981.].
Correction to Comparison of Nonprecious Metal Cathode Materials for Methane Production by Electromethanogenesis

Markus Siegert,Matthew D. Yates,Douglas F. Call,Xiuping Zhu,Alfred M. Spormann,Bruce E. Logan

DOI: https://doi.org/10.1021/acssuschemeng.6b01763

IF: 8.4

2016-01-01

ACS Sustainable Chemistry & Engineering

Abstract:[This corrects the article DOI: 10.1021/sc400520x.].
Correction: Steering the Crystallization of Perovskites for High-Performance Solar Cells in Ambient Air

Feng Wang,Ting Zhang,Yafei Wang,Detao Liu,Peng Zhang,Hao Chen,Long Ji,Li Chen,Zhi David Chen,Jiang Wu,Xin Liu,Yanbo Li,Shibin Li

DOI: https://doi.org/10.1039/d0ta90182b

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘Steering the crystallization of perovskites for high-performance solar cells in ambient air’ by Feng Wang et al., J. Mater. Chem. A, 2019, 7, 12166–12175, DOI: 10.1039/C9TA02566A.
Correction to "β-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends"

Toby R Edwards,Rahul Shankar,Paul G H Smith,Jacob A Cross,Zoe A B Lequeux,Lisa K Kemp,Zhe Qiang,Scott T Iacono,Sarah E Morgan

DOI: https://doi.org/10.1021/acsapm.4c01719

2024-06-20

Abstract:[This corrects the article DOI: 10.1021/acsapm.4c00468.].
Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Jiangyan Wang,Hongjie Tang,Lijuan Zhang,Hao Ren,Ranbo Yu,Quan Jin,Jian Qi,Dan Mao,Mei Yang,Yun Wang,Porun Liu,Yu Zhang,Yuren Wen,Lin Gu,Guanghui Ma,Zhiguo Su,Zhiyong Tang,Huijun Zhao,Dan Wang

DOI: https://doi.org/10.1038/nenergy.2016.72

IF: 56.7

2016-01-01

Nature Energy

Abstract:Nature Energy 1, 16050 (2016); published 29 April 2016; corrected 11 May 2016. In the version of this Article originally published the numbering of the author affiliations was incorrect.
Correction: Rational synthesis of 10GDC electrolyte through a microwave irradiation GNP facile route for SOFC applications

S P S Shaikh,Chandrashekhar V Rode

DOI: https://doi.org/10.1039/d4ra90017k

2024-03-14

Abstract:[This corrects the article DOI: 10.1039/C9RA09476H.].
Correction: Synergy of light and acid–base reaction in energy conversion based on cellulose nanofiber intercalated titanium carbide composite nanofluidics

Pei Liu,Teng Zhou,Linsen Yang,Congcong Zhu,Yunfei Teng,Xiang-Yu Kong,Liping Wen

DOI: https://doi.org/10.1039/d1ee90054d

2021-01-01

Abstract:Correction for ‘Synergy of light and acid–base reaction in energy conversion based on cellulose nanofiber intercalated titanium carbide composite nanofluidics’ by Pei Liu et al. , Energy Environ. Sci. , 2021, 14 , 4400–4409, DOI: 10.1039/D1EE90054D.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Corrigendum: New Anhydrous Proton Exchange Membrane for Intermediate Temperature Proton Exchange Membrane Fuel Cells

Baoying Sun,Huanqiao Song,Xinping Qiu,Wentao Zhu

DOI: https://doi.org/10.1002/cphc.201190067

IF: 3.52

2011-01-01

ChemPhysChem

Abstract:In Section 2.3, paragraph 2, the first sentence should read: “Comparing the results (Figure 5), the membranes all has a qmax value of near 2.25 nm−1.” The qmax value is 2.25 nm−1 rather than 3.25 nm−1. SAXS profiles of PVDF/PEO/DBS-H membranes at room temperature. In the Experimental Section, paragraph 3, the fifth sentence should read: “The scattering patterns were integrated to generate an I vs q curve, where I is the intensity of scattered X-rays and q is the scattering vector r, q is calculated from scattering angle θ and the wavelength of the X-ray beam λ by the equation q= 4πsin (θ)/λ.” The remaining two sentences of that paragraph should be disregarded. Figure 5 in the original manuscript should be replaced by the new version of Figure 5 shown below. Figure 5 in the published article is the relation between scattering intensity and the scattering angle, rather than q [calculated as q=4πsin (θ)/λ], due to an oversight by the author. The caption remains the same and is included for completeness. The author apologises for these oversights.

Correction to "Preliminary Investigations of an Opposed Rotary Piston Compressor for the Air Feeding of a Polymer Electrolyte Membrane Fuel Cell System"

Correction: in Situ Study of the Catalytic Mechanism for the Oxygen Reduction Reaction on a Polypyrrole Modified Carbon Supported Cobalt Hydroxide Cathode in Direct Borohydride Fuel Cells.

Preliminary Investigations of an Opposed Rotary Piston Compressor for the Air Feeding of a Polymer Electrolyte Membrane Fuel Cell System

Correction to “Investigating the Effect of a Diesel-Refined Crude Palm Oil Methyl Ester–Hydrous Ethanol Blend on the Performance and Emissions of an Unmodified Direct Injection Diesel Engine”

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Correction to Conceptual Process Design and Technoeconomic Analysis of an e-Methanol Plant with Direct Air-Captured CO2 and Electrolytic H2

Correction to "Low-Temperature Structural Battery Electrolytes Produced by Polymerization-Induced Phase Separation"

Corrigendum to “activity, Performance, and Durability for the Reduction of Oxygen in PEM Fuel Cells, of Fe/N/C Electrocatalysts Obtained from the Pyrolysis of Metal-Organic-Framework and Iron Porphyrin Precursors” [electrochimica Acta 159 (2015) 184–197]

Correction to “Kinetics on Li Deintercalation in Mg- or Li-Doped SiO/Graphite Composite Anodes for Li Ion Batteries: Dopant Effect”

Erratum: Numerical Simulation of An Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures [ECS Trans. 103 (1) 883-892 (2021)]

Corrigendum to “Mussel-inspired nanozyme catalyzed conductive and self-setting hydrogel for adhesive and antibacterial bioelectronics” [Bioact. Mater. 6 (2021) 2676–2687 / 452]

Correction: Optimization of misfit calcium cobaltite oxygen electrodes for solid oxide fuel cells through electrospinning processing

Correction: Rehman et al. Nanocomposite Membranes for PEM-FCs: Effect of LDH Introduction on the Physic-Chemical Performance of Various Polymer Matrices. Polymers 2023, 15, 502

Erratum: Improving a Mg/S Battery with YCl 3 Additive and Magnesium Polysulfide.

Correction to Comparison of Nonprecious Metal Cathode Materials for Methane Production by Electromethanogenesis

Correction: Steering the Crystallization of Perovskites for High-Performance Solar Cells in Ambient Air

Correction to "β-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends"

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Correction: Rational synthesis of 10GDC electrolyte through a microwave irradiation GNP facile route for SOFC applications

Correction: Synergy of light and acid–base reaction in energy conversion based on cellulose nanofiber intercalated titanium carbide composite nanofluidics

Corrigendum: New Anhydrous Proton Exchange Membrane for Intermediate Temperature Proton Exchange Membrane Fuel Cells