Abstract:Variations in the recovery of platinum group metals (PGMs) are often attributed to mineralogical and other natural ore-type variations. To increase the recovery of PGMs by the flotation process, a comprehensive understanding of gangue and valuable minerals is essential for optimising the extraction and processing of metals. Recoveries may be improved if the questions of how, where, and why losses occur can be answered with a certain degree of confidence. A requirement is the availability of statistically reliable mineralogical data. The PGMs of MG-1–4 chromite tailings dumps of the western limb of the Bushveld complex (BC) were studied in detail to unravel the PGMs and the nature of the platinum group minerals in the sample. Characterisation of the chromite tailings via deportment analysis revealed that the sample contained a significant amount of 3E PGM + Au (Pt, Pd, Ru, and Au) and was concentrated in the -25 μm fraction. The results of automated mineralogical analysis showed that the sample was composed of the PGE-sulphides group, comprising 63.6 vol%, PGE-sulfarsenides 10.4 vol%, PGE-arsenides 1.3 vol%, PGE-bismuth tellurides 3.3 vol%, PGMs-alloy 4.1 vol%, and Laurite comprising 17.3 vol% of the total PGE population. The sample was composed of 66.5 vol% of liberated PGMs, 0.2 vol% attached to liberated BMS, 27.3 vol% of PGMs attached to or locked within silicate or oxide gangue composite particles, 0.2 vol% of PGMs associated with BMS attached to silicate or oxide gangue particles, and a low proportion (5.8 vol%) of PGMs reported being locked within gangue or oxide particles. The majority of PGM grains observed were reported in the fast-floating category (64.4 vol%), 27.6 vol% in the slow-floating 1 category, 2.2 vol% in the slow-floating 2 category, and 5.8 vol% to the non-floating category. The results of the study revealed that the PGMs of MG 1–4 chromite tailings were liberated; however, the low liberation index (<0.2) suggested that a significant portion of PGMs remained trapped within gangue, hindering their recovery. This highlights the need for effective comminution (crushing and grinding) to achieve better liberation. The sample contained fine particles that were more prone to being lost in the tailings and to lowering recovery due to the slimes coating valuable minerals. The recovery of the PGMs from this complex's polymetallic bodies of low-grade and complex mineralogy will be insufficient with traditional methods and thus innovation is needed. Innovation like advanced comminution, novel flotation equipment or reagents, selective leaching and bioprocessing can overcome these challenges.

Where chemistry and mineralogy meet during PGE and BMS flotation

A methodology for gangue management in the flotation of a PGM-bearing ore through laboratory tests, mineralogical analysis and circuit modelling

Optimized Bioleaching Pre-treatment of UG-2 PGM Flotation Concentrate Using Design of Experiments

Mineralogical Insights into PGM Recovery from Middle Group (1–4) Chromite Tailings

Residual Dewatering Aids in Process Water on Flotation Performance of a Selected Cu-Ni-PGM Ore from a Siliceous Reef

Theoretical Study of 2-Mercaptobenzimidazole Derivatives As Chelating Collectors in Flotation Separation of Galena and Pyrite

The effect of heavy oxidation upon flotation and potential remedies for Merensky type sulfides

Study on Flotability and Surface Oxidation of Sulfide Minerals from the Tailing of an Iron-Copper Mine Using Electron Probe Microanalyzer

Chemical and colloidal aspects of collectorless flotation behavior of sulfide and non-sulfide minerals

A reagent scheme for galena/sphalerite flotation separation: Insights from first-principles calculations

Laboratory flotation study of the DPM Krumovgrad gold ore (Bulgaria) – Effects from improved collector suite and ore desliming

Flotation of Copper Sulfide Ore Using Ultra-Low Dosage of Combined Collectors

A case study of flotation of chalcopyrite-molybdenite ore using a mixture of pyrogallic acid and o-isopropyl ethylthiocarbamate: Insights from ab initio calculations

Collector Chemistry for Bastnaesite Flotation – Recent Developments

Improving micro-fine mineral flotation via micro/nano technologies

Experiment Study on New Processing of a Mixed Flotation of Recoverying Complex Copper-Lead-Zinc Polymetallic Sulphide Ore

Application of the response surface method (RSM) based on central composite design (CCD) and design space (DS) to optimize the flotation and the desliming conditions in the recovery of PGMs from mine sludge

Reclamation of iron and copper from BCL slag in Botswana

Using reagents in the form of inverse microemulsion for lead and zinc sulfide flotation

The effect of cathodic surface areas on galvanic interactions between grinding media, chalcocite and pyrite and subsequent mineral flotation

Experimental Study on Activated Sulfur Selection from High Alkalinity Lead Zinc Flotation Tailings