Abstract:Ammonia is a common pollutant, present in municipal wastewater streams. With the continuous shift of people moving to cities and the growing world's population, the overall wastewater amount is rising. Current ammonia treatment processes in wastewater treatment plants include biological nitrification. Here the ammonia is converted to nitrate or nitrogen. Unfortunately, the capital and operational expenditure costs of such processing are high and the ammonia is converted to products that have no value. Ammonia is a carbon-free energy carrier. Recently, technological solutions have been introduced to strip ammonia from wastewater [1]. The recovered ammonia can be electrochemically oxidised to benign nitrogen in an electrolyser, which can offer a cost-efficient technology to couple wastewater remediation at an anode with the production of a valuable by-product at the cathode, hydrogen. Currently, the commercialisation of the ammonia electrolyser technology is hindered by slow reactions at the anode and the cathode as well as the deactivation or degradation of the catalysts over time [2,3]. Consequently, the development of inexpensive, efficient anode material is imperative to reduce costs associated with ammonia destruction and electrochemical hydrogen production. This study focuses on a non-noble metal NiCu catalyst as a durable anode for alkaline ammonia electrolysis. We report that nickel-copper catalysts can oxidise ammonia to nitrogen at room temperature, see figure below. During electrolysis experiments, gas chromatography of the off-gases confirmed that both, nitrogen at the anode and hydrogen at the cathode, are generated with high faradaic efficiencies. Anode morphology and structure before and after electrolysis was investigated by X-ray diffraction (XRD), X-ray fluorescence (XRF), X-ray Photoelectron Spectroscopy (XPS), and scanning electron microscopy (SEM). To monitor possible intermediates produced by electrolysis, the electrolyte was analysed for NOx regularly by cuvette test and the electrode off-gasses were continuously monitored by GC-TCD. Overall, the electrode showed stability after continuous electrolysis in ammonia for over 30 hours. Further results will be presented at the conference. References: [1] L. Kinidi, I.A.W. Tan, N.B. Abdul Wahab, K.F.B. Tamrin, C.N. Hipolito, S.F. Salleh, Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment, International Journal of Chemical Engineering. 2018 (2018) 1–14. https://doi.org/10.1155/2018/3181087. [2] B. Zhou, N. Zhang, Y. Wu, W. Yang, Y. Lu, Y. Wang, S. Wang, An option for green and sustainable future: Electrochemical conversion of ammonia into nitrogen, Journal of Energy Chemistry. 60 (2021) 384–402. https://doi.org/10.1016/j.jechem.2021.01.011. [3] N.M. Adli, H. Zhang, S. Mukherjee, G. Wu, Review—Ammonia Oxidation Electrocatalysis for Hydrogen Generation and Fuel Cells, J. Electrochem. Soc. 165 (2018) J3130–J3147. https://doi.org/10.1149/2.0191815jes. Figure 1

Reversible Hydrogen Acceptor–Donor Enables Relay Mechanism for Nitrate‐to‐Ammonia Electrocatalysis

Regulating Intermediate Adsorption and H2O Dissociation on a Diatomic Catalyst to Promote Electrocatalytic Nitrate Reduction to Ammonia

Improved Nitrate-to-Ammonia Electrocatalysis through Hydrogen Poisoning Effects

Hydration‐effect Boosted Active Hydrogen Facilitates Neutral Ammonia Electrosynthesis from Nitrate Reduction

Reversed I1Cu4 single-atom sites for superior neutral ammonia electrosynthesis with nitrate

Electroreduction of Nitrate to Ammonia on Atomically-Dispersed Cu-N4 Active Sites with High Efficiency and Stability

Synergy between Cu and Co in a Layered Double Hydroxide Enables Close to 100% Nitrate-to-Ammonia Selectivity

In-situ electrochemical reconstruction and modulation of adsorbed hydrogen coverage in cobalt/ruthenium-based catalyst boost electroreduction of nitrate to ammonia

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

Electrochemical reduction of nitrate to ammonia via direct eight-electron transfer using a copper–molecular solid catalyst

Pulsed Nitrate-to-Ammonia Electroreduction Facilitated by Tandem Catalysis of Nitrite Intermediates

Stabilizing Hydrogen Radicals in Two‐Dimensional Cobalt‐Copper Mesoporous Nanoplates for Complete Nitrate Reduction Electrocatalysis to Ammonia

Ag‐Co 3 O 4 ‐CoOOH‐Nanowires Tandem Catalyst for Efficient Electrocatalytic Conversion of Nitrate to Ammonia at Low Overpotential via Triple Reactions

Electrochemical Nitrate Reduction to Ammonia on AuCu Single‐atom Alloy Aerogels under Wide Potential Window

Splicing the active phases of copper/cobalt-based catalysts achieves high-rate tandem electroreduction of nitrate to ammonia

Wide-pH-range Adaptable Ammonia Electrosynthesis from Nitrate on Cu-Pd Interfaces

Controlling hydrogenation pathway by metal hydride enable efficient electrocatalytic N2 fixation

A Cu/Fe3O4@CN tandem catalyst for efficient ammonia electrosynthesis from nitrate reduction

(Digital Presentation) Electrocatalytic Ammonia Oxidation Coupled with Hydrogen Production - Moving Towards a Carbon Neutral Water Treatment Cycle

Electronic Metal–Support Interaction Triggering Interfacial Charge Polarization over CuPd/N‐Doped‐C Nanohybrids Drives Selectively Electrocatalytic Conversion of Nitrate to Ammonia

Highly Selective Electrochemical Reduction Of Dinitrogen To Ammonia At Ambient Temperature And Pressure Over Iron Oxide Catalysts