Abstract:PURPOSE To maximize the benefits of respiratory gated radiotherapy (RGRT) of lung tumors real-time verification of the tumor position is required. This work investigates the feasibility of markerless tracking of lung tumors during beam-on time in electronic portal imaging device (EPID) images of the MV therapeutic beam. METHODS EPID movies were acquired at ∼2 fps for seven lung cancer patients with tumor peak-to-peak motion ranges between 7.8 and 17.9 mm (mean: 13.7 mm) undergoing stereotactic body radiotherapy. The external breathing motion of the abdomen was synchronously measured. Both datasets were retrospectively analyzed in PortalTrack, an in-house developed tracking software. The authors define a three-step procedure to run the simulations: (1) gating window definition, (2) gated-beam delivery simulation, and (3) tumor tracking. First, an amplitude threshold level was set on the external signal, defining the onset of beam-on/-off signals. This information was then mapped onto a sequence of EPID images to generate stamps of beam-on/-hold periods throughout the EPID movies in PortalTrack, by obscuring the frames corresponding to beam-off times. Last, tumor motion in the superior-inferior direction was determined on portal images by the tracking algorithm during beam-on time. The residual motion inside the gating window as well as target coverage (TC) and the marginal target displacement (MTD) were used as measures to quantify tumor position variability. RESULTS Tumor position monitoring and estimation from beam's-eye-view images during RGRT was possible in 67% of the analyzed beams. For a reference gating window of 5 mm, deviations ranging from 2% to 86% (35% on average) were recorded between the reference and measured residual motion. TC (range: 62%-93%; mean: 77%) losses were correlated with false positives incidence rates resulting mostly from intra-/inter-beam baseline drifts, as well as sudden cycle-to-cycle fluctuations in exhale positions. Both phenomena can lead to considerable deviations (with MTD values up to a maximum of 7.8 mm) from the intended tumor position, and in turn may result in a marginal miss. The difference between tumor traces determined within the gating window against ground truth trajectory maps was 1.1 ± 0.7 mm on average (range: 0.4-2.3 mm). CONCLUSIONS In this retrospective analysis of motion data, it is demonstrated that the system is capable of determining tumor positions in the plane perpendicular to the beam direction without the aid of fiducial markers, and may hence be suitable as an online verification tool in RGRT. It may be possible to use the tracking information to enable on-the-fly corrections to intra-/inter-beam variations by adapting the gating window by means of a robotic couch.

The Effect of Diamagnetic Defect in YIG on the Hyperfine Field Anisotropy

Heterostructured Co‐Doped‐Cu 2 O/Cu Synergistically Promotes Water Dissociation for Improved Electrochemical Nitrate Reduction to Ammonia

Efficient Electrochemical Nitrate Reduction to Ammonia Driven by a Few Nanometer-Confined Built-In Electric Field

High-ammonia selective metal-organic framework-derived Co-doped Fe/Fe<sub>2</sub>O<sub>3</sub> catalysts for electrochemical nitrate reduction

Dynamically Restructuring Nanoporous Cu-Co Electrocatalyst for Efficient Nitrate Electroreduction to Ammonia

Efficient electroreduction of nitrate via enriched active phases on copper-cobalt oxides

Engineering CoO/B heterojunction electrocatalysts for boosting electrocatalytic nitrate reduction to ammonia

Regioselective Doping into Atomically Aligned Core–Shell Structures for Electrocatalytic Reduction of Nitrate to Ammonia

Enrichment of Active Hydrogen at Amorphous CoO/Cu2O Heterojunction Interfaces Enhances Electrocatalytic Nitrate Reduction to Ammonia

Efficient Electrocatalytic Properties of Transition Metal (mn, Co, Cu) Doped LaFeO3 for Ammonia Synthesis Via Nitrate Reduction

A Cu-Co3o4 Tandem Catalyst for Efficient Electrocatalytic Nitrate Reduction at Low Concentration

Heterostructure engineered construction of N-doped CuO@Co3O4 for highly efficient electrocatalytic reduction of nitrate to ammonia

Suitability of markerless EPID tracking for tumor position verification in gated radiotherapy.

Enhancing Compatibility of Two‐Step Tandem Catalytic Nitrate Reduction to Ammonia Over P‐Cu/Co(OH)2

Matched Kinetics Process Over Fe2O3‐Co/NiO Heterostructure Enables Highly Efficient Nitrate Electroreduction to Ammonia

Electronic Metal–Support Interaction Triggering Interfacial Charge Polarization over CuPd/N‐Doped‐C Nanohybrids Drives Selectively Electrocatalytic Conversion of Nitrate to Ammonia

Tuned targeted catalytic engineering enables high-selective electrochemical low-concentration nitrate-to-ammonia

Ampere-level current density ammonia electrochemical synthesis using CuCo nanosheets simulating nitrite reductase bifunctional nature

Modulating the Electrolyte Microenvironment in Electrical Double Layer for Boosting Electrocatalytic Nitrate Reduction to Ammonia

Tuning transition metals layered-electroplated on bimetallic MxCu1-x crystallites (M = Fe, Co, Ni, and Zn) to boost ammonia yield in electrocatalytic reduction of nitrate wastewaters

Boosting Electrochemical Nitrate Reduction to Ammonia by Fe Doped CuO/Co3O4 Nanosheet/Nanowire Heterostructures